similar to: Asterisk and Monwall - comments

Hello, I have a Soekris net4501, which I'm PXE booting using pxelinux. Everything seems to be working splendidly, except for the fact that I can't seem to make pxelinux understand use the net4501's serial console port correctly. The net4501 uses the serial console as its primary interface; I'm using a null modem cable and minicom to operate with it. At boot, its startup

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

On 06/10/2014 11:41 AM, Thomas Quinot wrote: > Dear all, > > I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 > (comBIOS 1.33). This combination appears to not work out of the box... > > I see much advice floating around from a few years ago, hinting that > earlier versions of PXELINUX might have worked. However before resorting > to archaeology

Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- I made the assumption that showing the address is generally useful. Worst case, it won't make sense but still be displayed. Seems simpler than special-casing things. drivers/gpu/drm/nouveau/core/engine/graph/nv50.c | 117 ++++++++++++----------- 1 file changed, 63 insertions(+), 54 deletions(-) diff --git

Hello, I'm currently working on a new installation and wondering which architecture and protocol I should use... I want to share my Asterisk server between users on my internal LAN and a user connecting via Internet... So, my server has to be reachable from outside and also from inside... For the external user, I'll use a softphone and probably IAX2 ? What about internal users and

Hi All, I have a net4501 box with 16mb flash. Tried booting with lilo from flash but in vain.I guess syslinux will work for me.I have necessary equipment to mount flash onto a linux machine.After experimenting with syslinux i found syslinux is not writing MBR onto the flash.has anybody successfully booted flash? regards, Ravi -- The views presented in this mail are completely mine. The

I don''t know whether this is the right place to ask, but kindly point me to an FM that I can R if it isn''t. My wife is creating lots of Kazaa traffic, and I am using rsync to create a full mirror of Red Hat''s FTP site, Aurora Linux FTP site, the LDP site, and some other stuff. Clearly, when one is moving well over 100GB over a 128 Kbps link, this is going to take a

I know a SIP client behind a NAT trying to peer with Asterisk behind another NAT is troublesome. Has anyone had any luck doing this by interfacing Asterisk to the WAN using 1:1 NAT translation to give it a public IP while still firewalled? In my instance I'm using m0n0wall, but this is a hardware-neutral question. Thanks. -- Robert Goodyear Brand Up LLC http://www.brand-up.com

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

Hey Everyone, We are in the works of planning a new * installation for our company. We have 20 users in our main office and 5 users in a remote office a couple of states away. Our call volume for the main office will be anywhere from 5-10 concurrent calls. The remote office will have about 3 heavy users with two users making calls occasionally. Right now we have an existing PBX. We have a

Season Greetings to all Tom, in your faq, u have this noted: While I am currently using the HTB version of The Wonder Shaper (I just copied wshaper.htb to /etc/shorewall/tcstart and modified it as shown in the Wondershaper README), I treid this with wondershaper, using Bearing Leaf 1.0 stable i even changed the tc command to run_tc, and tried it in both angles, and i receive the following..

greetings all, i''ve searched high and low for this, but can''t seem to find an answer anywhere.. having read the docs and the wondershaper script itself, it occurred to me that the documentation promises an immediate drop in interactive app latency, specifically mentioning SSH as a big winner. however, looking through the script i can''t really tell just *how*

Dear John and Seth, dear R-devels, once again the question of method dispatch in S4 -- this time with setClassUnion(); taking up your advice in https://stat.ethz.ch/pipermail/r-devel/2006-April/037200.html https://stat.ethz.ch/pipermail/r-devel/2006-April/037201.html I have been too quick in stating that >setClassUnion()---at least in my case---solves the problem; > The problem arises

Hi, first of all, let me thank you for your great Shoreline Firewall. I use it with great success at home (protecting my WiFi connection). And now if I could have a question about traffic shaping. I did read everything I could find but I still have two problems: first, the MARK from tcrules is not working in HTB based simple tc filter line ("handle $MARK fw classid 1:20"). If I switch

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, been awhile since I''ve written. I now have a situation where I get to use traffic shaping for a client. ~ We implemented the WonderShaper script on our own firewall and experienced no problems. I made some modifications to it to add IPSec protocol packets into the 1:10 high priority class using the u32 filter. ~ So far on our

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.

Hi everybody! I know this discussion list isn´t just about wondershaper, but i think someone can help me. I used to have a linux box running red hat 8, as firewall on my lan. I upgraded to debian 3.0 and tried to use the same wondershaper files under debian, but, when i run wondershaper on ppp0 device, it just stops transfering. Remember: its the same files i used with success under red hat 8.

I''m currently building a firewall for a network with 2 ISP links. Unfortunately, one of the ISP''s doesn''t support BGP yet, otherwise I would be doing load balancing at the router, instead of the firewall. I''ve been trying to find information on how to get WonderShaper working, but everything I''ve found talks about setting it up for a firewall with one

Hi all, ive got wondershaper working well with the highest download while maintaing minimal latency but the problem is this: ive got 2 nics in the linux router eth0 and eth1. eth1= internet interface but this is connected to a router say 10.0.0.190, now off that router there are other servers, mail server, domino server etc now if i shape on eth1 ingress and egress using the wondershaper script

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all