similar to: Working Xten, Asterisk, double-NAT configs out there?

Hi guys! I hope somebody can help me with my problem: We have a server running dovecot and proxying IMAPS connections to our internal network. This worked so far very good until we upgraded the server to a new SUSE Linux version and with it dovecot from version 1.0.3 to 1.1.7. My guess is that something changed in the way dovecot reads the user file as the configuration stayed the same:

Hi! I''ve got two FreeS/WAN gateways setup, with one subnet<->subnet tunnel setup, which is working fine. I''ve setup iproute2 to route anything for either subnet via the ipsec0 device using a src address of the local interface. This is to force locally generated traffic (ie, traffic generated on the server) to go through the VPN, rather than out with a source IP of the

I'm a database noob, and it really seems like it would be overkill for my setup: I just want to proxy all connections from my DMZ to my internal mail server -- same internal server for all users. I used to use perdition for this set up, but am having issues getting it to play nicely with my new servers. Can I bypass all of the SQL stuff and just have dovecot forward all POP/IMAP

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

hi there! I have a couple phones connected to a sipura ata and if I go into *- IVR, I press options on the regular phones and it all works fine and dandy. then I connect an xten softphone, a new extension in my dialplan, I dial the ivr, * asks me to dial something to go through it, I press keys on xten, but nothing happens, * just times out through as if I did not press anything! is there some

Which rpm has libstdc++.so.5? xten-xlite for linux says it needs this. Of course, there will be something else it will need after I get this....

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Dear Guys, I?ve test Xten Lite softphone to connect to my Asterisk Box but it registers all the three lines at the same time and if I try to dial an extension it tries to reach 3 Ext. at the same time, can somebody haved this trouble? and how can I fix it. Also, I ?ll like to have the Xten LITE or PRO Softphone (Lite is free and PRO about $50.00 USD) it can hanle 3 lines (lite) and 6 lines

hi xten.de produced an activex for web phone. but I can not find any link for download. can u help me ? best Mani ____________________________________________________________________________________ Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. http://farechase.yahoo.com/promo-generic-14795097

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same

I have d/l the iso (*@home 0.9) , built the * box and followed the directions in the * handbook and http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemi d=26. I created extension 200 and verified that * was running fine. Loaded Xten lite, setup the proxy for local ip (10.0.0.201) per the handbook. After turning off the Norton Firewall protection, I am able to

Good morning all, I'm setting up Asterisk for the first time with no prior PBX experience. I'm following Andy Powell's 'Getting Started with Asterisk' (http://www.automated.it/guidetoasterisk.htm). This is my second time through that document - as I did something weird the first time and really upset it somehow - and I wanted to ask a few general questions of the list.

I have tried loads of configurations but I cannot get it to work. I basically have three computers and want to use soft phones on two of them to connect to asterisk so I can use them instead of dialling into my X100P card as the phone bill is getting bigger. I assume that I can configure * to accept calls from the soft phones and then route them according to my dial plan. I am basically trying

I have seen a couple of messages on the Xten and the work done by William Walsh (Kudos). It is not clear in my mind the advantages of SIP phones versus using GnoPhones (once we complete the work for the Windows version). Since I lack the experience with IP SIP phones, can someone, high level, tell me when it makes sense to use them. Is it complicated to set up on the Asterisk side? Thank you.

Ok I have a question. I have Xten-lite working with our Asterisk system and I am able to make and get calls. But the main problem is the sound is very choppy and sometimes it cuts off words. I have tested it with ulaw and alaw as well as GSM. They all do the same. ulaw seems to work better. I also have an ATA-186 which works great without this problem. Here is my Sip.conf settings.

from: http://www.xten.com/index.php?menu=download Seems to be working fine. just untar and run. But now I have to do some real voice testing. Not to my desk phone 2 feet away and get blasted with feedback!

I've just down loaded Xten Lite and it is now build 1079. It now finds the NAT firewall type and has loads more to configure. But it doesn't work on my poor W95 tablet PC. -- Dave Cotton Directeur Linux Autrement 193 rue Marcel Cerdan 84270 Vedene 04 90 23 30 81 "Internet Sheriff Technology" revendeur en France <http://www.linuxautrement.com> IAX 17004902330

I'm just curious if I was to place my * box behind a a FW/NAT box running linux, if my SIP calls will still work. Box right now is a RH9 computer using iptables as the FW. I wouldn't mind placing my * box behind it, but I'm wondering if anyone has actually gotten NAT working with *? Thanks, -- +------------------------------------------+ |Leif Madsen -

I have an office setup with shorewall and when there''s bandwidth problems, I''d like to know who''s hogging my bandwidth and how (port). What would be the best approach to have shorewall show me something like: IP | Port | Bytes In | Bytes Out I have 20 PCs connected via DHCP. I looked at the documentation and thought that accounting may be close, but accounting

I have a tdm 3xfxs and 1xfxo, aslo I have a setting with 1 snom 190 and 2 xten line. I can call from the snom to the ptsn line at the fxo port ok. I can call from the ptsn to the xten lite phone. I can call from the xten lite to snom but what I CAN`T do is; Call from xten to ptsn. When I dial from the xten, I can hear the dialed party, but he cannot hear me... Tips? Help? What I'm