similar to: Asterisk and H323 vs OH323???

Ok, at the bottom of my h323.conf file on my 1st server I have this: ; --------------------- [test] type=user host=209.237.227.185 context=termination-test incominglimit=10 accountcode=005 ; --------------------- Using an Asterisk at the other IP, I have this: exten => _1NXXNXXXXXX,1,Dial(H323/${EXTEN}@64.135.11.85,,o) This should send a call from the test-server to the IP of the 1st server;

Use oh323. Download the openh323 and pwlib tarballs from openh323.org Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! good luck Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com > -----Original Message----- > From: Senad Jordanovic [mailto:senad@cwcom.net] > Sent: Friday, September 12,

Hello everybody, I?ve been trying to solve a problem for several weeks now but it really beats me. There are several hard phones connected to an Innovaphone 3000 VoIP gateway. On the other side I have a SIP softphone connected to Asterisk. The problem I have is that on incoming calls (hardphones to softphone) I only have outgoing audio (from soft to hardphone); everything is OK when I call the

Hi Debian has a package for chan_oh323 (the original, external h323). It is not maintaind for quite some time AFAIK and also AFAIK offers no real atvantages over chan_h323. So I'd like to remove it. Before I do that, I have some questions, as I'm not familiar with H.323 channels: 1. Are there any useful features oh323 supports that h323 doesn't? That the version of h323 in 1.4.21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi All, I've just finished my upgrade to asterisk RC2. I need to have H323 support, and in the last months i've been using the chan-oh323 with good results. My question is: anyone in the list have made tests with both chans (oh323 and h323), which is best ? For this installation i don't need the gatekeeper support, i just want to

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

I m new to asterisk n i've got an IP phone that supports h323 protocol.... but i dont know how to configure asterisk to use it... i m comfortable in using sip & iax softphones.... but there is no h323.conf in /etc/asterisk/ .... i read that i've to compile some files but i m confused regarding h323 & oh323 ...... which one should i use.. plz tell me or atleast give some helpful

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi, what's the difference between h323 and oh323 modules? which one should I use? Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030722/3d3edb73/attachment.htm

Hello list, I have many IP hardphone like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider I have this problem: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider ( G729 ) only if I disable

Hello list, I have many IP hardphones like Siemens 300 basic ( old ) , cisco ata.. etc I need: G711 from old phones must be convert to G729 via asterisk and send to provider ( G729 from digium ) I have this problems: oh323 (last version): ------------- asterisk work with this driver ok for old phones, if I only faststart=no . But problem with codec , asterisk can speak with provider (

Hi guys, I've been trying to update my chan_oh323 from 6.1 to 6.3b. I built asterisk from cvs-head on the date Micheal said he made it compatible, pwlib-1.6.6 and openh323-1.13.5 (both with nothing more than the ./configure, make, well aplied patch on openh323) When I start * with my normal config I get this: [chan_oh323.so] => (OpenH323 Channel Driver) == Parsing

I've complied the OH323 .so successfully and can easily receive calls from my H323 gatekeeper (using 711u), however it seems that all outgoing calls are refused and I'm getting "reason 23 (Temporary failure)" as an error code which I can't find documented everywhere. My H323 gatekeeper needs a 001NXXNXXXXXX to dial out to the PSTN even if I'm in north america (Montreal)

Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of asterisk@home installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu

According to the wiki at voip-info.org, the dial structure for using oh323 without a gatekeeper is: OH323/<exten>@<host>:<port> or OH323/<exten> The second option is valid only in the case where a gatekeeper is used. NOTE: OpenH323 library v1.12.0 has a bug in the parsing of the destination host. When this version is used then the above syntax should be:

I've got problem with connections h323 -> sip and sip -> h323. I've Cisco 7940 phone with sip soft and Netmeeting as h323 node. As gatekeeper I've gnugk and brand new asterisk from cvs + chan_oh323 0.5.5 When I call from Cisco (SIP) to h323 node by alias registered on gatekeeper and h323 node will answer the phone... I have on my Cisco still Ringing. Call termination, no

I am trying oh323(version 0.67) , make call from sip UA to h323 gateway, can't get Call-id pass from sip UA to h323 gateway, h323 always gets call-ID sent from Asterisk as *. are there any configure to pass the correct call-id from sip UA to h323 gateway? or this is a bug in oh323 0.67? how about oh323 0.73 ? Mario On 9/29/05, Kanishka Somaratne <kani@technoportal.biz>

hello, Im tryin to make Calls from MS Netmeeting(h323) to Xlite(SIP) it rings, but as soon as i answered it dissconnects!!!! This is what i get from the Asterisk console: -- Executing Dial("OH323/R27469", "SIP/xlite1|10") in new stack Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1265 create_addr: Setting NAT on RTP to 0 Aug 13 10:19:03 DEBUG[524304]: chan_sip.c:1500 sip_call:

Hi there. I thy to compile asterisk-oh323-0.6.3a but it fail in the make command. I have the pwlib-v1_6_6-1 and openh323-v1_13_5-1 as saying in the README file of the packet asterisk-oh323-0.6.3a I do make and this is the error: # make for x in wrapper asterisk-driver; do make -C $x all || exit 1 ; done make: *** No rule to make target `ccflags'. Stop. make: *** No rule to make target