similar to: connecting a sipura sip device to asterisk before dialing any digits

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

Hi folks ! I bought two sipura 841 phones. I used to have GN Netcom headset which I connect instead of the handset. The problem is that I don't have any sound coming out the headset and I can't speak neither ! I'am located in France and I was wondering if the cabling in the sipura and in the headset is the same (I mean the order of the cables) or maybe is there something else to

Anyone else got a Sipura 3000 in the UK? Apart from CID not working it also seems to not notice any of the line state changes on the PSTN when the remote party terminates the call. It only recognises the offhook signal which gets sent much later. Chris

Hi, Is it possible with asterisk to deliver a dialtone to a software phone, such as kphone? I'm able to dial, but the silence seems to confuse my users :) thanks, lane

Hi, On Sun Jun 12 09:11:13 CDT 2005, Rich Adamson wrote: > > > exten => s,1,Wait(1) > > exten => s,2,GoTo(s,1) > > > > If I'm on the console when a call comes in, it loops through this bit of > > code a bunch of times. I'm guessing I could lengthen the "Wait(1)" time, > > but is there any other way to do this? > > Sure there is,

Ok, this is probably a stupid question, but I can't seem to find anywhere where it tells how to put someone on hold on a zap channel. Flash gives me a dialtone and # tells me to enter a new extension, how can i just put the caller on hold. Pressing # then hanging up drops the call. Is there a simple way of doing this without transfering the user to a parking lot? Thanks, Jon.

I've been using asterisk for 3+ years now, I love it, but it doesnt love me back. :-) It was crashing frequently and seemingly randomly prior to this latest upgrade. Not sure what version it was running prior to upgrade (it was probably an old CVS HEAD from 2+ years go.) Anyway, currently running 1.4.21.2. == Problem == Problem is that its crashing for seemingly no reason at all, no

> -----Original Message----- > From: Jacqueline Lee [mailto:jlee@isdomaininc.com] > Sent: Friday, September 23, 2005 11:46 AM > To: asterisk-users@lists.digium.com > Subject: channel offhook state > > > We are using a digium card (TDM400) with asterisk for our access to the > PSTN. Initially when the server starts, all the zap channels on the card > are in the

I've been scratching my head trying to think of a way to do this, but without success yet. I'm using the Manager API. If I have two channels linked to each other (i.e. direct connection), or even if they are independent channels, I can transfer them both to the same extension by using Action: Redirect and using Channel: for one and ExtraChannel: for the other. This is most useful for

Is the Sipura 3000 the only way to interface a remote pstn line and connect incoming calls to Asterisk? I have a location connected by network that has a phone line, when the room is occupied I want the line ti ring there as normal, but when the employee is travelling I want the line to be conencted to a ATA that then feeds it as an incoming pstn line to the pbx located at my office so it can

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've tested the S100U unit in two different computers both with different USB subsystems. The one it worked the best in used the usb-uhci USB driver. The other system uses the usb-ohci USB driver. To make sure it was not the installation, I used the same hard drive that had asterisk in both systems. And I moved the X101P and S100U between both

I have an interesting problem. I am attempting to install a payphone utilizing a Cisco ATA-188. The payphone actually works, but there are some timing issues. What happens is you pick up the payphone and the ATA grabs a line and goes offhook. While you monkey with putting money in and dialing the number, you are eating up the time before you get the offhook reorder tones (or howler tones

Hi, I am currently working on a thin-client "low-cpu" usage telephone application. The current setup is that you can make phonecalls using an alsa supported usb headset and a smartlink based usb modem (a sweex usb modem, which -in large quantities- goes for 17.95 euro's) for analog lines. Unfortunately, it is really made as a modem and not for audio purposes, so, there is a pretty

I have an adit 600 with an fxo card connected to a digium T1 card. If I try to make an outgoing call and the T1 cable is disconnected, asterisks returns congested like it should. But, if the adit 600 is connected to the T1 card, the adit 600 immediately "answers" the call even if there are no physical lines attached. I even removed the fxo card and the adit 600 still

2008/9/29 Alex Balashov <abalashov at evaristesys.com> > Try this: > > exten => _XXXX,1,Set(THISTECH=${CUT(CHANNEL,/,1)}) > exten => _XXXX,n,NoOp(Technology is ${THISTECH}) > exten => _XXXX,n,Set(THISCHANNEL=${CUT(CHANNEL,/,2)}) > exten => _XXXX,n,NoOp(Channel is ${THISCHANNEL}) Hi, I don't have any spare zaptel enabled system I could try this on, but I

I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk. When I connect to the Sipura to dial out on the PSTN line connected to the Sipura's FXO port, it gives me the dialtone of the PSTN line and then I can hear the DTMF for the number I dialled beforehand. It does work but the customer perceives this delayed second DTMF feedback as "unprofessional" and the

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, a bit of a newbie using Asterisk and trying to get some Sipura SPA-841 phones to talk to the Asterisk server. Not doing something right apparently.... If I turn on debug for the extension in the CLI (sip debug ip xxx.xxx.xxx.xxx) I see frequent 5 packet attempts by the server to contact the phone, but seems to always be failing. The status

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be

I am considering using Sipura-3000s as FXO devices for my * system. Has anyone tried them in that configuration? They interest me because they need no PCI slots and therefore no drivers. I would much prefer not to have any special kernel requirements for my system. /carmi