similar to: Broadvoice Toll-Free IVR issues

Hello, I'm running Asterisk and using VoicePulse for IAX termination. I would like to have toll-free number assigned to my asterisk, any hints where I can get this number? VoicePulse does not offer toll-free numbers. Thanks, David

Hi, I'm trying to pull my home from a remote machine. I get a error 'failed to set permissions on home : Not owner' which is obvious: rsync -a remote:/home/foo/bar/zee / this create /home/foo/bar/zee here , but give above error I don't own /,/home but i own /home/foo/bar and lower. If i tell rsync to: rsync -a remote:/home/foo/bar/zee /home/foo/bar it creates

Hi all, I'm following the manual but I get the below error, and I believe tinc is clobbering my conf file. I've never set up VPN before, I'm just trying to connect to my work network from home. All the following is on my work computer. Thanks in advance for any help. $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:1A:A0:17:3A:50 inet addr:172.24.104.145

I have this in my config: exten => _800XXXXXXX,1,Verbose(0,${CHANNEL(peername)} Calling ${EXTEN}) same => n,Dial(SIP/tollfree/1${EXTEN}) exten => _1800XXXXXXX,1,Verbose(0,${CHANNEL(peername)} Calling ${EXTEN}) same => n,Dial(SIP/tollfree/${EXTEN}) exten => _NXXNXXXXXX,1,Verbose(0,${CHANNEL(peername)} Calling ${EXTEN}) same => n,Dial(SIP/trunk/1${EXTEN}) exten =>

ENUM lookups at e164.org return a IP route for ALL toll-free numbers. I was surprised to observe that ALL toll-free numbers get a hit at e164.org. It appears that ALL toll-free prefixes have been delegated, thereby publishing an IP route for YOUR TOLL-FREE NUMBERS, my toll-free numbers, and even toll-free numbers that have not been allocated. :-) See below Should I care? Even though this

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

OK, I've downloaded and unzipped the firmware files in ipw2200-fw-3.0.tgz - so I have 4 files: ipw2200-bss.fw, ipw2200-ibss.fw, ipw2200-sniffer.fw and LICENSE.ipw2200-fw, all of which I've placed in the /lib/firmware directory. Unfortunately, the instructions in README.ipw2200 and INSTALL are not clear as to what to do next. I'm using CentOS 5 on my (Dell) laptop so setting-up wireless

Dear Friends, I do require centos 4.2 x86_64 cds here in delhi,India. If anyone of you can arrange that for me i will be vary grateful. The requirement is urgent. Thanks for your time and effort. -- Regards Abhishek Jain -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

I have been using the inbound 800 services from vitelity. Slowly the usage has been rising and in the month of Jan the bill was for $650. I am currently on a 1.9 cents a minute plan. Am I paying too much ? Some suggestions my team generated to reduce the toll free incoming call bill were: 1. When people call in on the 800 number take the local number they are calling from and then call them back

Hello, I have been researching Asterisk and have a few questions. Is it possible to allow users to only call certain area codes? Reason for this is that the plan from BroadVoice allows unlimited calling to certain countries. Any country outside of this plan would be charged on a per minute basis and I am trying to avoid that. Another question is if there is a way to distinguish a land line

I have three ethernet card and two of them connected to diffrent ISP and has diffrent gateways. And one ethernet card is connected to local lan. I have installed iptables and configured the firwall to work as nat gateway for the users. Now I want to route only mail traffic to the perticular ISP and which I am not able to do it. I have done iproute configuration what ever lartc said. But still I

Hi, I am trying to get an fedora core 2(samba-3.0.3-5) export mounted as cifs on a fedora core 3 test 1(kernel-2.6.7-1.478, samba-3.0.5-0pre1.0). It always gives an error operation not permitted. [root@ayanami1 root]# mount -t cifs -o user=moo,password=cow //ayanami3/ moo /mnt/cow mount error 1 = Operation not permitted Refer to the mount.cifs(8) manual page (e.g.man mount.cifs) I

Evening everyone. I am going to be changing our current Samba PDC running Red Hat, to a FreeBSD server. I was curious if anyone out there, who is currently using FreeBSD as a PDC could give me their feedback on how it is working. Also, if they had any suggestions or recommendations regarding Samba on FreeBSD. Maybe even what they like and dislike about it. I would imagine, it should be the

Hi All, I have a strange problem that I don't understand. I have an access file which has the following line: 168.144.250.215 OK # xsmtp02.mail2web.com Yet email from this IP address is getting rejected. From my log file Oct 15 21:52:33 mx01 sendmail[10569]: ruleset=check_relay, arg1=xsmtp02.mail2web.com, arg2=168.144.250.215, relay=xsmtp02.mail2web.com

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>

Hi all, I am trying to configure my Asterisk PBX to connect to a broadvoice account. I want incoming calls to go to the "s" extension and to ultimately have outbound calls routed through my broadvoice account(s). I cannot for the life of me get this to register correctly. I am currently receiving this message on the console: Failed to authenticate on Register to

Hello all, When I call the Broadvoice number all is good. When I try to call out through DISA on my broadvoice line i get the following: Executing Dial("SIP/147.135.0.129-0815bc60", "SIP/16037862111@proxy.bos.broadvoice.com|30") in new stack -- Called 16037862111@proxy.bos.broadvoice.com -- Got SIP response 480 "Temporarily Not Available" back from

Hi, I have two accounts with broadvoice. Now, I want to be able to distinguish between them. I though that this would be simple by adding "/EXTEN" at the end of the register statement. For example: register => num1:pass@sip.broadvoice.com/1000 Unfortunately, this is not working. When I call into my box I hear busy tone. My config looks like this: [root@voip asterisk]# cat sip.conf

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com

So it was all working well and then suddenly I'm unable to get incoming calls from BV. Outgoing is fine. I'm using AAH. I have the following settings; register=9738281625@sip.broadvoice.com:PASSWORD-GOES-HERE:9738281625@sip.broadvoice.com/2208 [broadvoice] username=9738281625 user=phone type=peer secret=PASSWORD-GOES-HERE qualify=1000 port=5060 nat=yes insecure=very