similar to: broadvoice replacement

I am looking for a voip provider that provides good rates (below 5 cents/min or unlimited) to UK NCFA numbers. Braodvoice advertises they do unlimited to NCFA but does not have the ability to actually termiate those calls as per the CTO Nathan Stratton, and last he said they dont even have contracts in place to get service provisioned for that. As such I am looking for another provider to take

I just tried to call a NCFA number that is known working in the UK (+44 0870 ..) and got a US message from broadvoice 'that number is not in service please check the number and try again'. I am wondering if it is my setup or if broadvoice no longer provides unlimited access to those numbers. Could someone else verify if this is the case? It is still listed on their rate page as

Hi, I have installed the latest version of asterisk(1.4.0-beta3), and built app_rxfax/txfax. I'm using spandsp from here, http://www.soft-switch.org/downloads/snapshots/spandsp/spandsp-20061207.tar.gz Everything builds ok. I had to manually apply the patch from the site so configure would spot spandsp libraries. However, when I try dialing my virtual fax extension (either from a phone or

Hi all My * implementation is working brilliantly with only one small fault left to kill. I'm using IAXTalk from Telappliant for my incoming/outgoing calls to the pstn network; if I set my codec to GSM everything works great - no pauses but quality is a bit poor. If it set the codec to alaw (I think I'm using the correct one - I'm in the UK) I get intermittent pauses on the call.

Hello folks, i upgraded to the actual CVS head from yesterday (27.5.) but can not get incoming SIP calls from my provider (sipgate). If someone calls my number, my asterisk responds with the following error: May 27 21:30:21 NOTICE[1114606512]: chan_sip.c:6351 handle_request: Failed to authenticate user "<CallerID>" <sip:<CallerID>@217.10.66.11>;tag=as38e9693c I

Hi everyone I'm interested in using the Telappliant/voip-talk offering as an alternative to my DDI analog problem. (see [Asterisk-Users] Multiple DDI & Hunting on Analog Lines (UK) for details) Does anyone on the list have any recent comments on reliability etc? I would really appricated some positive and negative comments. Cheers Matt

Hi, Anyone used this service, any comments on reliability/support? Thanks John

Hi, Despite much searching, I can't find anything quite like the problem we seem to be experiencing with our recently activated asterisk pbx. Of four people answering several calls per five minutes, I have reports of the occasional call starting with dead air. The user picks up the call from the queue, and they can hear that the line is too quiet. If they start talking, the caller either

I went on a service call yesterday to find an asterisk system with a T100P card on a Qwest PRI and a TDM40B card connected to fax machines. The TDM40B LEDs were not lit, and the system did not respond to keyboard input. However, calls were being processed for the PRI and 7960 phones. I replaced the TDM40B card with a new one, and the system now seems to be ok. But I'm wondering, why

Hello Everybody, I was going thru the C code of Asterisk. Does anybody know how does one go about modifying the C code of Asterisk? Please do reply. Regards, Bharat M. Sarvan EZZI BPO Pvt Ltd., PUNE. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Ive just installed a TDM4000P with 4 fxos. The zaptel config is fine, zttest comes back with configured. If i call a line when zttest it shows on the display,and then goes when the line drops. In * when a call comes in, it follows my dialplan and answers the call according to the log, but IT DOESN'T actually pick up the call, i.e. it continues ringing. I'm using KS signalling, and

if you have anyone questions about your service you can contact us at the support 978-418-7300 James Jones Broadvoice Technical Support ________________________________ From: asterisk-users-bounces@lists.digium.com on behalf of Ben Wern Sent: Sat 8/28/2004 4:34 PM To: Asterisk Users Subject: [Asterisk-Users] Broadvoice BYOD Plans - 3-way and Call Waiting Can anyone who is using Asterisk

Has anyone had success sending faxes via a broadvoice byod account? Everything 'looks' to go as expected, but then my fax hangs up and I get a printout with Error 351. I am wondering if it is a codec issue or something. Any help will be great. Neri -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I got a broadvoice "business" account under the byod(bring your own device) program. I have applied the patches and created new asterisk debian packages. I have the account working on inbound and outbound. The problem area is outbound caller ID. I have 3 other accounts with IAX2 providers and have no problem setting the caller ID on outbound calls. I called them and they

All, I signed up for a broadvoice BYOD plan over the weekend (very excited about their offering) and after about an hour I had asterisk registered and was making in and out bound calls. However, the next day (without changing anything) I couldn't call in or out and haven't been able to get it going again. I can connect using a softphone (X-Lite) and make calls in and out

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified

I had my asterisk configuration working very well with broadvoice, but it stopped working this afternoon. I plugged the Cisco 7960 phone I used for my origional signup (just a few days before they offered generic BYOD) and it works fine. I did notice it seems to do all of its comunication through proxy.broadvoice.com (I used tcpdump). I have never contacted broadvoice about using asterisk

Okay, I installed http://www.xorcom.com/rapid/ Xorcom'ms Rapid distro. I had broadvoice working with the following settings described on the list and as well as broadvoices website. (http://www.broadvoice.com/support_install_asterisk.html) I'm trying to run another Distro (CentOS) and everything is installed and working fine with MySQL. However, the "same" configs give me the

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

Me again... I have service with a company that does not allow for a BYOD plan. They will not give out credential or server info either. Is it possible to run the FXS port of the ATA to an FXO port in *? The service I have is throug Broadvox Direct using the Mediatrix 2102. I have tried this using loop start and kewl start. The * box sees the incoming ring, picks up and starts my dial plan. But