similar to: Zaptel and zttest

I have a problem with Asterisk-bristuffed using a zaphfc card. I am located in the Netherlands, so I have an ISDN line from KPN. When I start Asterisk, and plug in the ISDN line, everything works perfectly for about 5 minutes. And then the ISDN line is down for 1 minute, and after that minute, the line comes back up and works for another 5 minutes. Every time the line goes down I get the error

Hi all, I'm unable to complete the installation of zaptel. I did a checkout today from cvs. When I do make clean; make install. It gives me an error at this portion of the installation: /include/linux/modversions.h -DSTANDALONE_ZAPATA -c wct4xxp.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE

Hi, I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports, I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings, Thanks for any info. Marco.

Hello! While performing some zttest's for some time today, I was also keeping an eye of a top of the machine. While the zttest was running, I also had a ssh-keygen and a dd creating a 5GB file on an EXT3 partition running. I noticed that for the most part, I got a decent number of 100%'s, and a bunch of 99.6%'s or higher. However, it seems that whenever the zttest dropped

Another request make me test my t1 card, which has no quality problems, but all that I get is: [root@SIP2-MI zaptel-1.2.1]# ./zttest Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hi list! I'm trying to setup a new * server with a TE210P in a Dell 2850 box. I'm using zaptel version 1.2.5, the linux flavour I'm using is CentOS 4. In a previous thread I read about the results I should expect from zttest. On my home box (using the crappy Asus A7V600) I got really bad results from zttest (just over 97.5) but I know that this motherboard just sucks. To my

Our asterisk system gains access to the PSTN through a voip provider. We have no digium or other telephony hardware in our system. Do the zttest results still matter to us? Our results were as follows: --- Results after 1007 passes --- Best: 100.000000 -- Worst: 99.780273 -- Average: 99.975763

Hi, I have a TDM400P running with only one FXO port running on a VIA EPIA MS10000 (1Ghz Via Eden). When I run zttest from Zaptel 1.2.1 it hang and when I interrupt it with Ctrl-C that is the result: ?anyone have some idea about why isn't working? Some additional info: # /usr/src/zaptel/zttest -v Opened pseudo zap interface, measuring accuracy... --- Results after 0 passes --- Best:

Hello, > upsmon doesn't work on amd64. > On i686 everything is OK. Configs are the same. > I'm attaching strace - could You help? this might be linked to that: https://alioth.debian.org/tracker/index.php?func=detail&aid=301880&group_id=30602&atid=411544 when you say work", can you give a bit of detail (ie doesn't receive events, crash (seems not as per

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

Hello, Today we setted up a server that needs to use MeetMe but doesn't have any Zap hardware. So we need to use ztdummy (at least, this was our idea). Rarely: zttest is not working at all (100% bad, using zttest -v doesn't give anything, etc.). Of course, after load ztdummy, there isn't any background or anything. It is the same kernel (Debian Etch default kernel, 2.6.18) than

I was browsing the applications developed in zaptel and came across zttest. After I run it, I get the following: Opened pseudo zap interface, measuring accuracy... 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%

Hi, I''m trying to use (in my view/layout) javascript_include_tag and it generates something like: <script type="text/javascript" src="http://apps.facebook.com/fbml_static_get.php?src=%2Fcanvas_name%2Fjavascripts%2Ffacebooker.js%3F1234225416&appid=my_app_id&pv=1&sig=995d0e338609600ecbc28c3caf156f29&filetype=js"></script> But when trying