similar to: Polycom Bootrom 2.6.2 and SIP 1.5.2

On the polycom soundpoint ip 650 six line phone: Say I have 4 lines on hold, is there way to tell who I put on hold. I cannot see the caller ID of the other lines, only the last line I placed on hold. Thanks, --E -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I have some polycom 430's which I'm trying to get to work with asterisk. I have them working for the most port other than one little issue. The 430's have two line appearances. I'm trying to get the second line registered to a different extension but for some reason it's not allowing me to do this. The first line will register fine but the second line never

I'm stumped on this one and any help would be greatly appreciated. I'm just trying to get my Polycom 601 to have multiple extensions on it. For example, on line 1 I want extension 21, on line 2 I want extension 22, and on line 3 I want extension 23. Ideally I'd actually have each extension appear on 2 lines and therefore filling up all 6. I should be able to do that with the

Hey all, Just getting started playing around with my Polycom 600. According to the wiki, it looks like it's recommended to run BootRom 2.6.1 and SIP 1.4.1. Is that info still current, or is it safe to upgrade to 3.0.1 and 1.5.2? Justin --

I'm trying to figure out how to allow an extension to register more than once. For instance, I have all of these 4 line IP phones that I use with Asterisk and I would like to have a persons extension (say 101) ring at all four lines so that if the person is on the phone they can take another call, but it appears as though if you try to register the same extension more than once then the most

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

I have the following situation: Asterisk 1.2.1 25+ Polycom 501 telephones. Bootrom 2.6.2.0032 Application 1.6.2.0041 Some 501's local to my network, some across the great INTERNET divide. PRI connected to Sangoma card. Issue: horrible echo (and squeals, and "underwater-like" sound) on speaker phone when calling from extension to extension. echo not present when calling outbound

(new asterisk user - currently setting up Polycom IP600 phones) Does anyone know if it's possible to make a sip phone instantly pick up on speakerphone when a particular call comes in? Eg so that you can quickly bother someone across the office without making them reach for their phone?

I'm having problems updating my bootrom to the latest (3.2.2) version. Basically, my phone starts downloading the bootrom, but I am completely certain that it doesn't actually complete the process. It gives me an "error updating bootROM!" message, but it only takes about 2 seconds to complete the download (which, because of my WAN link and FTP server environnement I know is

I set up hints and presence monitoring on some Polycom phones connected to an asterisk server with the expectation that the phones that are "watching" other extensions would be notified when the other extension sis ringing, in addition to the other statuses (on the phone, statuses set by the user on the phone, not registered, etc). I can see when the line is in use, and when it is

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

I am getting to my wits end with these phones (and so is my boss). I am getting an random echo on these phones and I have an issue opened with Polycom and its been in their research and development department for almost a month with no results. I have noticed that I get a message "RFC3389 support incomplete. Turn off on client if possible" in asterisk. I have researched this and made

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

...even when I do the "factory reset" (4-6-8-* then 456). I tried using FTP and TFTP, but even though the phone uploads the log, I get these errors: 0927211350|app1 |3|00|Time has been set from 0.us.pool.ntp.org(69.60.124.59). 0927211350|cfg |4|00|Could not get all 512 bytes of the header. 0927211351|cfg |4|00|Could not get all 512 bytes of the header. 0927211422|app1 |4|00|Loaded

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

I am using version 1.4.1.0040 and 2.6.1.0003. I have read about newer versions out there, how can I get them? I'm having an intermittent issue regarding DHCP with one of my phones, and I recall when I loaded 1.4.1 on this one phone, it failed once, then it succeeded the second time. I am wondering if a firmware update will help. Or is there any known issues with Fedora Core 2 dhcpd and IP

Hi, HPA: Thanks for the nice new features, appreciate that. Syslinux is always a nice program. For the new version, 3.10-pre20, I encountered a problem now, my client machine uses sis900 chip, and it still can not run simple menu with pxelinux in this version (3.10-pre20). It's same situation as I encountered when I used syslinux 3.07, 3.08 and 3.09. For 3.10-pre20, I compiled in Fedora

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"