similar to: Cisco contract for 7940/7960 firmware access

I have been trying for sometime to upgrade this phone to either sip, or the latest sccp (at this point I don't care) with no success. It has an sccp image (don't know the version off the top of my head) that is incompatible with chan_sccp. When I boot up the phone, it asks the tfpt server for the .tlv file, then the SEP<mac> file which it receives successfully. It then asks for

Does anyone know if version 3.1 is Call Manager or SIP? Thanks.

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Does anyone have a good resource to learn how to program the soft and hard buttons on a Cisco 7940 or 7960 phone? Using SIP Firmware...thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060303/e5e63834/attachment.htm

Hi Everyone!, I'm not sure if my previous request went through or not...It got returned as not-deliverable??? Who knows! Anyway, I need to get hold of the Cisco Firmware to upgrade a 7910G to sip. I know it can be a real pain in the butt getting hold of the firmware, so any help in obtaining it relatively fast and painlessly would be much appreciated. Cheers M. -------------- next

Hello list, does anyone know how to change the "interdigit timeout" when using Cisco IP Phone 7940/7960 with SIP-Firmware and Asterisk? it's default value is 15 sec. but i have nothing found to set this in tftp-config file etc. Thanks in advance, Roland

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Are any versions of the Cisco 7940/7960 or 7940G/7960G phones compatible with the 802.4af Power over Ethernet Standard? Ok, I know the question has been asked before, but googling has turned up several contradictory results: 1/ No - not at all 2/ Maybe - 79XXG will work 3/ With a special cable/dongle (a la wikki) I am looking at getting

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

Hello, I'm considering using Asterisk with some type of Cisco phone, and currently considering either the 7940 or 7960 because of its more-complete functionality (compared to the 7905). I'm currently wondering: Do all the expected functions (transfer, conference, voice mail, message waiting indicator, etc.) work normally with Asterisk over SIP? What caveats are known about using

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

I have some Cisco 7960's and want to use them with SCCP - I have gotten it working with a few different firmware versions but all seem a little flakey. I know that SCCP is not as solid as SIP but am wondering, which firmware version is advised for use with chan_sccp from http://chan-sccp.sourceforge.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know if the 7912G (which the wiki says can do either sccp or sip) uses the 7940/60 sip firmware? I ask this because the only firmware I can seem to find on TAC for the 7912G is sccp, no sip...if it takes it's own firmware and doesn't use 7940/60 firmware, can someone point me to the right location for it? Thanks, Marty Mastera M3 Resources marty@m3resources.com Phone:

Hi, I use * release 1.0.9 with differents phones and softphone, i've got a problem with my Cisco 7940G (last SIP Firmware). Sometimes, when i but a call on hold, the caller has got the music, but when i "resume" the call, then the caller does not hear me (and nothing at all)... I must wait for 10, 20, sometimes 60 seconds before he could hear me again. Any body already had

Can someone point me in a direction where I can acquire the Cisco 7960 SIP firmware? I just purchased two phones of ebay, but they are both in Call Manager mode. Thanks, Marcus -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030515/6265b777/attachment.htm

I don't know if this is already common knowledge, and it's not specificly for Asterisk, but if you are using Cisco phones and want to roll XML applications, make sure you have "Connection: close" in your HTTP header. Without it screen loads are very sluggish. In PHP, do: header("Connection: close"); I whipped up quick-and-dirty PHP/MySQL/Cisco XML directory and

Greetings i have been using asterisk with good success with soft phones and I need to purchase some Sip capable phones to test. How would/do vendor specific phones like cisco 7900's and 3Com VCX 3100 series phones work SIP to SIP if they download the protocol from the Vendor call centers? I want to build my own with Asterisk, and use different phones. They say they are RFC 2543

Hi, I have followed the thread on where to get a maintenance contract so that I can upgrade the firmware to a SIP version and have called two different places, CDW and Insight. Neither place will sell the contact, all I get is a B.S. excuse to why they can't. Has anyone had luck with a more friendly place or do they have the images? TIA, Trevor

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

is there a way to support login and logout functionality in a phone? We are using Cisco 7940 and 7960 phones and have 2 shift. We want to be able to use the same phone using like 2 different extensions. The phone will then "remember" your settings if possible, if anyone has left you a voice mail etc. Is this possible? Regards, Paul -------------- next part -------------- An HTML

Hi, We are using Asterisk 1.2.1 with Cisco 7940 and 7960 phones. Most things are running fine ;-) But, when you are calling and you want to Transfer, you need to press first on the 'more' button (4th), then you have the label 'Trnsfr' to Transfer. these are the lables on the softkeys when having a phone call: "Holt / EndCall / Confrn / more" press more and you get