similar to: Re: E1 (Digium E100P) problem : B-channel succesfully restarted

Hi! I have an Asterisk Box with one E1. This is connected with PSTN. My problem is that periodically the Asterisk console shows the following message. -- B-channel 0/1 succesfully restarted on span 1 -- B-channel 0/2 succesfully restarted on span 1 -- B-channel 0/3 succesfully restarted on span 1 -- B-channel 0/4 succesfully restarted on span 1 -- B-channel 0/5 succesfully restarted on span 1 --

Hello list, i've got some problems getting a E1 line with a E100P up and running (germany). # cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW RED "YELLOW RED" sounds not so good. When launching asterisk, enabling pri debug on that span, i see outgoing attempts: ;---------- snip -------- > [00 01 7f ] > Unnumbered

hi guys, I have a little problem maybe you can help ... I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel line from the telco going into it .. the E1 line is OK, because plugged into a Lucent Portmaster 4 it works OK .. plugged into the asterisk box I just get an engaged tone, and asterisk posts this message on screen : WARNING[1167272000]: File chan_zap.c, Line 5275

Hullo everyone, Iam new to Asterix but am trying to get R2 signalling working with a Digium E100P E1/PRA Card. My Telecom doesn't have an implementation of ISDN PRI yet, so it's R2 that is supported. Could anyone have a patch to fix this for me. Am told it has something to do with Assembly Language programming. Please help me fix this. Regards, Nicholas

Hi.... Apologies for the length of this, but any help would be greatly appreciated ;-)... I have installed and configured a Digium E100P on my Asterisk PBX and I have connected this to an 8 port E1 VoIP gateway on a Cisco 6509. There is also an external E1 link from our Telco plugged into one of the other ports on this gateway and this gateway is in turn registered with a Cisco CallManager

Hi again. I made echo 0f > /sys/kernel/debug/dri/0/pstate and then reboot the system. And, flickering disappear completely, I just have some tearing when something it's moving a lot in videos. Definitely it was the solution for flickering issue. Have a nice day ? Enviado desde mi Samsung Mobile de Claro -------- Original message -------- From: Ilia Mirkin <imirkin at

The issue is like this.: https://youtu.be/4YQSL3xWrJA I have some tearing and sometimes flickering, just screen off and on suddenly in shorts periods of time. I have this problem with videos in YouTube using Firefox, and local videos using vlc and MPlayer for example. Enviado desde mi Samsung Mobile de Claro -------- Original message -------- From: Ilia Mirkin <imirkin at

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

I'm using xorg and nouveau, not modesetting. Thanks for your response. Enviado desde mi Samsung Mobile de Claro -------- Original message -------- From: Ilia Mirkin <imirkin at alum.mit.edu> Date: 12/27/19 7:31 AM (GMT-06:00) To: Jairo Quintanilla <jairo_6875 at hotmail.com> Cc: nouveau at lists.freedesktop.org Subject: Re: [Nouveau] Flickering Nvidia GeForce GT210 Are you

Answers bellow. 2018-02-28 1:41 GMT-03:00 Daniele Pezzini <hyouko at gmail.com>: > 2018-02-27 14:51 GMT+01:00 Jairo Rotava <jairo.rotava at gmail.com>: > > Hi, > > > > I had an issue where after returning the power from a shutdown.return the > > ups would do another shutdown.return during the boot, and kept this > forever. > > After some

Hi, I''m running Nevada 75a configured as dom0. I added a domU HVM running Nevada 75a, on a Sun X4600 with 8 ADM Dual cores. I can get the domU installed and configured, however, I can not get any network connectivity. I followed the steps accoding to documents on Open Solaris. I also followed some of the threads of the list to verify the configuration, but I can not fix the

Hi, I had an issue where after returning the power from a shutdown.return the ups would do another shutdown.return during the boot, and kept this forever. After some investigation I found the problem is a bug on the ups - TSSHARA model, driver nutdrv_qx: every time I shutdown with return, and reconnect the usb after the power is back it would start another shudown.return cycle. When I used my

Hi mates, First to all thanks for your help. I've installed Nouveau driver for my Nvidia GeForce GT210 using Archlinux, but I have some flickering issues when playing videos, only in the video windows. Sometimes I can see some flickering when scrolling. Please help. I don't know how to fix it. Atte. Jairo Quintanilla -------------- next part -------------- An HTML attachment was

Por favor, estoy aprendiendo R para aplicarlo exclusivamente en modelos jerárquicos lineales o multinivel. Todo lo que me puedan ayudar les quedaré muy agradecido. Cordialmente, Jairo P.D.: Presento mis disculpas por el correo anterior [[alternative HTML version deleted]]

Por favor, estoy aprendiendo R para aplicarlo exclusivamente en modelos jerárquicos lineales o multinivel. Todo lo que me puedan ayudar les quedaré muy agradecido. Cordialmente, Jairo [[alternative HTML version deleted]]

2018-02-28 21:11 GMT+01:00 Jairo Rotava <jairo.rotava at gmail.com>: > Hello, > > I think that on this file nutdrv_qx_megatec.c the definition for > shutdown.stayoff may be wrong. In the file the definition is "S%sR0000\r"m > while on the megatec protocol description ( > http://networkupstools.org/protocols/megatec.html) the command is just > "S%s\r".

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body text="#000000" bgcolor="#ffffff"> <br> Stephen J. Wilcox wrote:<br> <blockquote type="cite"

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

Hello, I have a E100P card from digium and I try to implement a conference bridge in asterisk. I wonder since I got the E100P card do I still need to load ztdummy for caller from h323 endpoints to work with Meetme? I load the E100P driver but i did not load the ztdummy driver. My h323 caller does not hear any voice play by Meetme. Looks like ztdummy is required as long as h323 is concern and