Jairo Buendia
2005-May-10 04:04 UTC
[Asterisk-Users] E1 (Digium E100P) problem : B-channel succesfully restarted.
Hi! I have an Asterisk Box with one E1. This is connected with PSTN. My problem is that periodically the Asterisk console shows the following message. -- B-channel 0/1 succesfully restarted on span 1 -- B-channel 0/2 succesfully restarted on span 1 -- B-channel 0/3 succesfully restarted on span 1 -- B-channel 0/4 succesfully restarted on span 1 -- B-channel 0/5 succesfully restarted on span 1 -- B-channel 0/6 succesfully restarted on span 1 -- B-channel 0/7 succesfully restarted on span 1 -- B-channel 0/8 succesfully restarted on span 1 -- B-channel 0/9 succesfully restarted on span 1 -- B-channel 0/10 succesfully restarted on span 1 -- B-channel 0/11 succesfully restarted on span 1 -- B-channel 0/12 succesfully restarted on span 1 -- B-channel 0/13 succesfully restarted on span 1 -- B-channel 0/14 succesfully restarted on span 1 -- B-channel 0/15 succesfully restarted on span 1 -- B-channel 0/16 succesfully restarted on span 1 -- B-channel 0/17 succesfully restarted on span 1 -- B-channel 0/18 succesfully restarted on span 1 -- B-channel 0/19 succesfully restarted on span 1 -- B-channel 0/20 succesfully restarted on span 1 -- B-channel 0/21 succesfully restarted on span 1 -- B-channel 0/22 succesfully restarted on span 1 -- B-channel 0/23 succesfully restarted on span 1 -- B-channel 0/24 succesfully restarted on span 1 -- B-channel 0/25 succesfully restarted on span 1 -- B-channel 0/26 succesfully restarted on span 1 -- B-channel 0/27 succesfully restarted on span 1 -- B-channel 0/28 succesfully restarted on span 1 -- B-channel 0/29 succesfully restarted on span 1 -- B-channel 0/30 succesfully restarted on span 1 -- B-channel 0/31 succesfully restarted on span 1 I have look for in the source code to check the meaning of this message but I haven't found anything. The only thing that I could check, It's that T203=10 seg and T200=1 seg. For example, Cisco has T203=30 seg. In http://www.acacia-net.com/wwwcla/protocol/q921.htm I read the meaning of those timers. Could Asterisk restart E1 because It don't recieve anything before T203 finished? My configuration is: /etc/zaptel.conf span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 I don't know if this behavior is correct. Can someone help me? Thanks in advance. ______________________________________________ Renovamos el Correo Yahoo!: ?250 MB GRATIS! Nuevos servicios, m?s seguridad http://correo.yahoo.es
Tony Mountifield
2005-May-10 04:41 UTC
[Asterisk-Users] Re: E1 (Digium E100P) problem : B-channel succesfully restarted.
In article <20050510110451.71880.qmail@web25601.mail.ukl.yahoo.com>, Jairo Buendia <mananallovera@yahoo.es> wrote:> Hi! > I have an Asterisk Box with one E1. This is connected > with PSTN. My problem is that periodically the > Asterisk console shows the following message. > > -- B-channel 0/1 succesfully restarted on span 1 > -- B-channel 0/2 succesfully restarted on span 1 > [..etc...] > > I don't know if this behavior is correct. Can someone > help me?Perfectly normal behaviour. Once an hour, idle channels are restarted, but active channels are left undisturbed. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org
Frank Sautter
2005-May-10 05:20 UTC
[Asterisk-Users] E1 (Digium E100P) problem : B-channel succesfully restarted.
hello jairo, Jairo Buendia wrote:> -- B-channel 0/1 succesfully restarted on span 1unused b-channels are reset by asterisk every hour (default). you can set the interval to another value in your /etc/asterisk/zapata.conf resetinterval=86400 ; e.g. reset every 24hours or even longer. i think since 2 months or so this should work also. resetinterval=never regards frank