similar to: Transparently Routing German pri through Asterisk

I am wanting to front-end a legacy PBX with an asterisk box. I have done plenty of asterisk work over the last 6 months to PRI circuits, but not with a PBX being involved. I know I can use asterisk and digium cards in this manner, but do I need separate cards for the PRI -> Asterisk side to the Asterisk -> PBX side, or will a 4-port PRI card do the job? (I already have a spare one of

Dear all I have now install TE210P 2 port E1 card on asterisk 1.4.10 on centOS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI asterisk think PRI_CPE and remote end also CPE i have configure /etc/zaptel.conf span=1,1,0,ccs,hdb3

Dear All, I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed. Digium TE110p asterisk 1.2.19 cent OS 4.4 zaptel 1.2.18 libpri 1.2.4 etc/zaptel.conf span=1,0,0,cas,hdb3 bchan=1-15,17-31 dchan=16 when i ztcfg -vvv im having this error message and the E1 is not getting up. "cas

Hi, I configured cdr_mysql (addons 1.0.9) to write the cdr records to the mysql db. The problem is that no records are written to the db. Why? I can import the csv-file to the db. so i assume the db is setup correct. Is there any chance to get debug from cdr_mysql to find his problem? This is my cdr_mysql.conf file: [global] hostname=localhost dbname=cdr password=passw0rd user=root ;port=3306

Dear all I got one more error my asterisk E1 card connected with avaya E1 card [avaya]-------E1-----[asterisk] i got this 2 error what is start asteris on consol mode asterisk -vvvvc [Jul 27 09:51:29] WARNING[737] chan_zap.c: PRI Error on span 0: We think we're the CPE, but they think they're the CPE too. [Jul 27 09:51:30] WARNING[737] chan_zap.c: PRI Error on

My legacy PBX accepts CID number, but not name. My old PRI vendor never sent the name, so there was never an issue. I have wedged asterisk between the Legacy PBX and PSTN. PSTN - PRI - asterisk - PRI - Legacy. Any calls from asterisk (sip and iax extensions) which have callerID set, will not connect. The legacy PBX hangs up, but asterisk thinks that it is still ringing. I have added

Hi *, I want to integrate the Eicon Diva 4Bri Card to Asterisk. Eicon drivers and capi is installed. I use the latest dev version from eicon compiled and installed for my fedora 2 system. I found the chan_capi for asterisk from www.junghanns.net. Also loaded the patch and applied to the chan_capi source tree. I changed the Makefile to include the capi20.h from eicon:

Does anyone know how to monitor * to see if they are receiving timing slips on a span connected to a T100P card? I am seeing b-channel restarts quite often and also getting "No D-channels available" warnings from time to time. Yesterday I had all the b-channels crash during a MeetMe Conference. Not good! This PRI is connected to an Avaya Definity PBX that is onsite and located in the

Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first only rings at my phone and in the second i can see the callers number before i am connected. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

Hi guys, Can I use a Sangoma a101 to interface a legacy pbx to an Asterisk server? The pbx doesn't have sip and I want to come in off of a sip trunk and interface with the older system. I know I can use a pri card to hook in to the phone network, but can I use this same card to feed back the signaling as if I were the phone company to the older system? Thanks, Tom

I am trying to test out my PRI configuration on a server by conection another asterisk server to it. I have the T-1 cards up and both set to bchan=1-23 and dchan=24 in zaptel.conf I am getting lost on the signalling in zapata.conf. using pri_cpe makes sense for my target box, but I am getting the following errors on my source box if I use pri_net or pri_cpe signalling. May 31 17:15:06

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Just upgraded to most recent CVS and now I get this: pri_dchannel: PRI Error: We think we're the CPE, but they think they're the CPE too. when starting asterisk. Needless to say, I can't run asterisk without my PRI. Guess I'll start reverting code backwards day by day until I find the code that works. -Matthew

I have been getting quite a bit of PRI Resets using my Quad PRI Digium card. Prior to the resets I am getting similar notices to the following chan_zap.c:7482 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 3 Telco claims the PRI's are fine on their end and that it is my unit. Is this timing? (google somewhat leads to this) I am running 1.08 asterisk zaptel

Is it possible to send CLID NAME on a PRI? The numbers we send out are being received by telco and propagated, but the names we send out are not showing up. Is this a feature in PRI? Do we need to set PRI_NET instead of PRI_CPE? Is this just not possible? Is this a telco config issue? Thanks for your help... I've read voip-info, and various other sources, and search engines, and google...

I am using a SIP softphone (X-lite, SIPPS or Firefly) connected to an Asterisk v 1.0.3 PBX. The PBX is also connected via a ISDN-PRI crossover cable to a Avaya Definity Generic 3 PBX via a TE405P card. All outside of the office calls go through the Definity. Here's the issue: Calls to internal SIP extensions, Definity extensions, other offices within our private network (through the

Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten =>

Calling all Definity admins, Got a few questions about Definity -> Asterisk interoperability. 1) What are the options for integration? Can I hand off extensions from the Definity and vice versa? 2) Anybody have any working configs they would like to post? I've found and read the legacy integration on the wiki about the two systems. I've also googled and found a few threads that were

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the