similar to: FXO ATA?

Hi All, I'd really like to see a show of hands with regard to people's experience with FXO interfaces. I own a few X100p cards and have had nothing but problems with them. I also took part in Sipura's beta program, for the SPA-3000. While it can be an improvement over the X100p, it presently has echo problems that make it unusable. Sipura has not acknowledged the problem ( at least

Hello all ! Can anyone recommend me ATA device that REALLY has T.38 built in. So far I have heard of Telco Systems Access201, which seems to be impossible to bye in Europe (all resselers are droped Telco systems ATAs for some reason (tried in Germany and in UK so far)), and I have heard that SIPURA SPA-2100 should have T.38 built in into newer firmware, but I wasn't able to confirm that

Hi, I am implementing T.38, and finding a problem getting boxes that work with T.38 for testing. A lot (maybe most) ATAs now claim to support T.38, but I'm finding a lot of these lie. I have one box here that just crashes when it hears a fax tone. :-) I'm looking for boxes known to implement T.38 properly, and which really work in the real world. Regards, Steve

Does anyone know of a 24 port ATA device that could be installed in a phone closet? Like a channel bank, but, instead of multiplexing onto a T-1 circuit, it would convert to SIP/RTP on a LAN connection. Thanks, -- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575 mike@introspect.com www.introspect.com

I read the thread about what IP phone is best for business deployment with great interest. Our need is slightly different however. We are deploying VoiP as a value-add with our high speed internet service and are having trouble finding the right SIP analog terminal adapter. In order to support people's existing phones and wiring we need to use an ATA. 1) The first priority is we want

Ok, I am back from my thanksgiving holiday, and I find there was a big snow storm here in Seattle. Apparently during the storm there where multiple brown out/black outs. I have struggled since day one to get a high quality PSTN gateway configured with my very long loop and Mac based asterisk. I originally tried the HT-488, which had multiple issues, and was unacceptable. I then purchased

Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking for a CAPI compatible active BRI adapter capable of NT mode. I have found that the 'Eicon Diva Server 4BRI' fulfills theses requirements. However, at EUR 1387 for four BRI interfaces, it does not come cheap. Are there other users of similar hardware that can point me to alternatives ?

Does anyone have any experience with the Audiocodes MP-108 FXO gateway? I'm looking to get one for incoming PSTN lines. In particular, does it pass caller ID information to Asterisk? I currently have a Mediatrix 1204 but Caller ID does not work, even though the specs say it does. All it sends are the names of the ports set up internally on the gateway (ie. "pstnline1" etc) when

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

Hello, I'm currently looking at FXO options to provide a POTS line to Asterisk to trunk calls with. Does anyone have any experience using the Linksys Sipura 3201 as an FXO device for Asterisk? Thanks

was breezing over http://voxilla.com/ Looks like a new ATA from the founder of Komodo Technology (aka the Cisco 186) Sipura SPA 2000 http://www.sipura.com/products/spa2000.htm to join the others Cisco ATA 186/188 http://www.cisco.com/warp/public/cc/pd/as/180/186/ 8x8 DTA-310 http://www.8x8.com/products/home_office/dta-310/index.asp.html Grandstream HandyTone 286

Anyone have call waiting working on the ATA-186 connected to Asterisk? Other VoIP phones seem to work, but I can not get the ATAs to allow call waiting. Christopher M Iarocci Network Admin JD Posillico 631-249-1872 X244

I have running * without any Digium (or any other) hardware. Now I need to connect analog FAX machine to it. I think that cheapest and easiest way is to buy ATA. Please correct me if I'm wrong. Now, which ATA should I buy? Local dealer sells those four. I can buy something else (if there is any reason for it), but I prefer something of this. One more question, can I plug two lines in any of

Now I have searched around and not seen anything to do this. I want to in remote locations were we need to have single or 2 PSTN lines for in dial as little hardware as possible and as stable as possible so that they will operate without user intervention. What I want to do is be able to take a single PSTN line in and go out through adsl for the Inet link. These would be in VERY remote

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

Hello-- In the interest of Symmetry, does anyone else in the world see any need for a device like the IAXy (or the SIP ones from other manufacturers, like the ATA186), but one that presents an FXO interface instead, so it can be connected not to phones, but the PSTN? murf

Anyone know of a company that makes a pass through ATA? By pass through I mean have an Ethernet switch built into the ATA, like most desktop phones have. All of the dual ethernet ATA's I have seen have WAN/LAN ports, not two LAN ports. I fooled around with DMZ etc...but it just doesn't work as well. Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone know of any equipment that I can use to connect a laptop running asterisk to a POTS line (RJ11) ? Regards, Dovid __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

I am looking for an ATA that has had very reliable results when passing FAX over IP. I was thinking of testing the Cisco (not Linksys) ATA 186 I1, ATA 186 I2, ATA 188 I1. This is what I'm looking for: FAX -> PTSN -> through Asterisk -> ATA -> Fax Machine. I have QoS from PSTN entry to ATA on the network so I can assure precedence. What has everyone out there been using

I have a ATA 186 with SIP firmware 3.1 when I changed the configurations to use the g.726 codec I received many erros and the calls doesn't work. I changed the fields: - LBRCodec: 6 <- the code for g.726 - TXCodec: 6 - RxCodec: 6 The errors: Jul 9 13:15:37 NOTICE[1192491824]: rtp.c:500 ast_rtp_read: Unable to calculate samples for format G726 Jul 9 13:15:37 NOTICE[1192491824]: