similar to: spandsp-0.0.2pre11

Let me lay it out for you.... Call comes in over a T1 - Signal is em_w. The extension is seen as *<callerid>*<last 4 digits of number being called>*. Which is fine in it self. I have my extension.conf file set up as follows... [did] ; Receive call as *<calling>*<called> exten => _.,1,Answer exten => _.,2,Cut(CALLING=EXTEN,*,2) exten =>

Per: http://soft-switch.org/spandsp_faq/ar01s07.html FAXing with spandsp keeps giving me core dumps. Its crap, isn't it? Actually the crap in this case is probably libtiff. Versions 3.5.7 and 3.6.0 seem reliable. The FAX image handling in version 3.6.1 is broken. All the core dump problems I have investigated turned out to be due to a very old version of libtiff, or version 3.6.1. I am

I have a potential client that wants to send many faxes simultaneously, over E1 trunks. How CPU intensive is spandsp's txfax? How many concurrent faxes could be sent by a decent CPU (e.g. Xeon 3GHz) before timing starts to get disrupted? Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

I can't get spandsp to compile. when I go to the */apps directory i continually fails. Makefile:80: warning: overriding commands for target `app_rxfax.so' Makefile:77: warning: ignoring old commands for target `app_rxfax.so' cc -fPIC -c -o app_rxfax.o app_rxfax.c app_rxfax.c:45: error: `PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP' undeclared here (not in a function) make: ***

I am having classic "frame slip" symptoms on 4 different systems with 4 different providers (all full PRIs, Qwest, XO, Xspedius, and First Digital are the providers). By classic I mean pages cut short. I do not hear clicks on calls however, and faxing from a fax machine plugged into the asterisk box via an fxs port (no VoIP) faxes just fine through the PRI. Also, faxing directly from

Dear all I have a Asterisk server (version 1.0.7) running with a TE110P card on a 3Ghz P4 machine (running nothing else but asterisk) So far so good. Today I was trying to receive faxes using spandsp fax client. I used spandsp v0.0.2pre18 (which compiled against libtiff 3.5.7) It compiled fine, installed fine, run fine. But when sending a fax (from a Brother fax machine) the image received

Hi all, Anyone have an idea which version of spandsp, libunicall, libmfcr2, libsupertone, app_rxfax/app_txfax and chan_unicall I should use for the latest asterisk 1.2? Would that be the ones listed below? http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre4.tgz http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/

Hello all, I use Fedora 3, and I have compilation problem of SpanDsp , when installaing spandsp, tiff warnings and errors generated and libunicall generate "unresolved references....." Is the problem in my libtiff installation, spandsp.h or in tif_dir.h and tiffiop.h? Are tif_dir.h and tiffiop.h too old? The solution provided by ?HO SIN? to ?Kaws? : >>> recompile libtiff

the attached log with verbose=6 and debug=6 refers. we've got a sangoma A104 (no hwec) with PRI ports 1 & 3 loopbacked to each other. we're trying to have txfax send out on one of those pri ports with rxfax listening on the other side, hence having asterisk send a fax to itself. we however have bad, and i mean really bad (<10%) success rates. we're currently using asterisk

I'm trying to install spandsp But when I try to patch the Makefile it gives this error [root@pbxmilkshake apps]# patch < apps_makefile.patch patching file Makefile Reversed (or previously applied) patch detected! Assume -R? [n] y Hunk #1 succeeded at 41 (offset -6 lines). Hunk #2 FAILED at 67. is it ok to go on

I've installed spandsp-0.0.1k on a RHv9 box with CVS-HEAD-09/19/04 and compiled the libraries just fine. Having a problem with patching the asterisk/apps Makefile however. The patch attempt results in: [root@phoenix apps]# patch <Makefile.patch patching file Makefile Hunk #1 FAILED at 35. Hunk #2 FAILED at 68. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej [root@phoenix

Does anyone have an update patch file to get Spandsp installed? I'm running asterisk CVS-HEAD-11/19/04-21:53:37 on redhat 9.0 I installed spandsp-0.0.2 when runnig the patch I get patching file Makefile Hunk #1 FAILED at 41. Hunk #2 FAILED at 69. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej -------------- next part -------------- An HTML attachment was scrubbed...

Hi list, I'm running current SpanDSP http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre6.tgz with Asterisk 1.2.22 somewhat successfully. Most Fax machines do work but I have problems with people having Tobit FaxWare and Shamrock CapiFax. http://www.tobit.com/login/mrd.asp?CategoryID=120 http://www.shamrock.de/ I've got black bars over the pages. In Tobit some content is Ok,

Hi Steve and all, 1. Faxing from asterisk back to the same asterisk (from one Zap channel to another) doesn't work for us. Txfax called with the 'caller' parameter issues CED, while the receiving side needs CNG in order to switch to fax extension with rxfax. 2. This is probably the reason why J2 and our UC don't recognize incoming fax. Thank you. Alex Zarubin Webley Systems

*************** *** 41,50 **** APPS+=$(shell if [ -f /usr/include/linux/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/local/include/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/include/osp/osp.h ]; then

I've made some modifications to zttest in order to use it as a frame clock accuracy tester / slip detector. I'm not certain if that was it's original purpose, but it seems that a lot of folks try to use it that way. The result is something that I'm calling ztclock for now to help avoid confusion. I'm including the source at the end of this post. You can compile it by placing

I'm trying to compile spandsp and Asterisk but the patch makefile hunks don't even resemble any parts of the asterisk Makefile. I am using the latest version of both. Has anyone else run into this problem? -Mark

I cannot see it!!!! make[1]: Leaving directory `/usr/local/src/svn-versions/asterisk/pbx' /bin/sh: curl-config: command not found make[1]: Entering directory `/usr/local/src/svn-versions/asterisk/apps' Makefile:103: *** missing separator. Stop. make[1]: Leaving directory `/usr/local/src/svn-versions/asterisk/apps' make: *** [depend] Error 1 Makefile: 93 install: all 94

I followed the instructions at http://www.opencall.org/instructions.html and http://lists.digium.com/pipermail/asterisk-users/2003-October/025094.html I was able to compile spandsp (./configure ; make ; make install), "manually" patched asterisk apps/Makefile (/usr/src/asterisk/apps), as the supplied patch does not fit the actual CVS apps/Makefile After make clean ; make install, I

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.