similar to: Calls from analog/FXS phone?

Hi, I recently acquired an iaxy device. Since I turned it on, the phone makes a strange noise. Is this normal? I'm not sure if there is some configuration that needs to be provisioned for it to quieten down. With my LinuxJack, the phone was dead until it the device was enabled by software, which is why I'm not sure if the behaviour of the iaxy is normal. I am a newbie with digium

Hi I have been searching the wiki and mailing lists and I cant see where my config is incorrect. I have a Digium tdm11b (1 fxo + 1 fxs) this is the output of cat /etc/zaptel.conf # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: WCTDM/0

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

Hi all, I'm newbe with asterisk and i'm facing with this problem that i'm not able to solve. I've to put an asterisk box after an analogic pbx wich require a 0 digit to give the dialtone. So when a client ask asterisk to dial an extension it should 1) send the 0 digit 2) wait for the dialtone 3) dial the extension the client send. How can i obtain this result? Thank's in

Hi: So I have a library function called fooo() in a source file B.c and an external A.c file that is referencing a function fooo() in it. foo is returning a pointer to a structure A.ll: %struct._bar= type { %struct._foo, i32, i32 (%struct.doo*, %struct.doo*, %struct.doo*)* } declare i8* @fooo() #2 B.ll: %struct._bar= type { %struct._foo, i32, i32 (%struct.doo*, %struct.doo*, %struct.doo*)* }

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

Hello, everyone After having spent several time to look for any solution for my problem, I decided to write here. Here is the problem got a Digium X101 FXO card and Digium TDM400P alias freshmaker (1 fxs module on it on first port ) in my asterisk box. The X101 works perfectly. The problem comes from the TDM400, when i plug a tested working phone on it , i get no dialtone; the goal is to

Hi *, now for a long time i am trying to set the outgoing callerid, without luck. I am here in Germany, my asterisk has a pri interface connected to a PMX installed by Telekom. All telephone calls are preselected to EcoVoice. I am using asterisk 1.2.7.1, zaptel 1.2.5 and libpri 1.2.2. A week ago we tried with a device able to simulate a telephone system so send out a callerid, and that

On Fri, Jun 30, 2017 at 8:52 AM, francis picabia <fpicabia at gmail.com> wrote: > > > On Thu, Jun 29, 2017 at 4:46 PM, Rowland Penny via samba < > samba at lists.samba.org> wrote: > >> On Thu, 29 Jun 2017 16:28:38 -0300 >> francis picabia via samba <samba at lists.samba.org> wrote: >> >> > On Thu, Jun 29, 2017 at 3:48 PM, Rowland Penny

On Thu, Jun 29, 2017 at 4:46 PM, Rowland Penny via samba < samba at lists.samba.org> wrote: > On Thu, 29 Jun 2017 16:28:38 -0300 > francis picabia via samba <samba at lists.samba.org> wrote: > > > On Thu, Jun 29, 2017 at 3:48 PM, Rowland Penny via samba < > > samba at lists.samba.org> wrote: > > > > > > > > > > > Well, no it

Does anyone know of a way to make a standard analog phone plugged into an FXS port do something other than get a dialtone when you pick it up? For example, if the phone should automatically ring someone or play a greeting when picked up without having to enter an extension? - Robert -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone know a good (and stable) voip gateway product with 4 ports (2 fxo and 2 fxs), with the following requirements: * being able to connect analog phones to the FXS ports, and communicate over SIP with an REGISTRAR/PROXY server (SER in our case). * being able to connect the FXO port to local office PSTN network, and dial to that office pstn number and getting an internal dialtone, or

I'm having trouble with a WX100USB adapter and a Siemens Gigaset cordless phone. If I select fxols as a signalling method, calls are being disconnected. Usually after about 4 minutes, and asterisk just says that the phone has hung up. If I choose fxogs, I immediately get a LINE IN USE message on my phone and I can't even get a dialtone. If I choose fxoks, it mostly works, but sometimes

Unless you are specifying by IP, NTP isn't going to resolve with e.g. 0.pool.ntp.org if you don't have DNS running. Personal Experience. If you're using Samba's builtin DNS (I don't), then seems to me NTP should be last on your list. Of course, ntp can temporarily resolve using /etc/resolv.conf until you get your DNS running. My issue was mostly an order of startup versus

I've read there can be issues with /tmp so I switched the test to /var/tmp One file (foo.txt) is made by the shell user, while the other file (doo.txt) is made by the same user connected over Samba. bash-3.2$ ls -n doo.txt -rwxr--r-- 1 3000 3004 29 Jul 4 09:51 doo.txt bash-3.2$ ls -n foo.txt -rw-rw---- 1 61001 10 39 Jul 4 09:50 foo.txt With -l they both seem

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short

I have a TDM400P with one FXO module and two FXS modules in it. I also have a Wildcard X101P. After trying hard to get things working on various Intel computers, but having echo problems that made it not really usable, I decided to try it on some older PowerPC (Macintosh) hardware running Yellow Dog Linux. Things started off smoothly. Both zaptel and asterisk seemed to compile okay, and both

I apparently have a dead FXS module. Is there any kind of test I can run on it (on a live system) to determine if its good or bad? The telephone has no dialtone, gets no calls. It has been working for several months, and just quit yesterday. Thanks! Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO