similar to: Converting 7905G to SIP

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

I have been trying for sometime to upgrade this phone to either sip, or the latest sccp (at this point I don't care) with no success. It has an sccp image (don't know the version off the top of my head) that is incompatible with chan_sccp. When I boot up the phone, it asks the tfpt server for the .tlv file, then the SEP<mac> file which it receives successfully. It then asks for

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

I have a few Cisco 7905G phones and I having a little trouble configuring them. They are working with Asterisk. I'm able to get the sip image loaded, but I can't get the phones to blind transfer. Does the Cisco 7905G Phone use XML Services? If you are using the 7905G phone, would you post any of your configuration files so I can try and figure out where I'm going wrong? Thanks for

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

Is the 7905G Firmware the same as the 7960 firmware? -- MBM

Hi to all, I've just received my Cisco 7905G ipphone. I want to connect it to asterisk server but it looks that it has been preloaded with sccp protocol, so I guess I need H.323 or SIP firmware image of some kind. I have a working tftp server on my asterisk box also....What do I need to do now to get things wokring? Thanx in advance, Victor...

I bought a couple of 7905G phones with a Callmanager license but i found on the site these phones can have a SIP image (which i downloaded) but before i upload the image i want to know if anybody tested them ? Michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031016/4c2821af/attachment.htm

Hi, How well to the Cisco 7905G or Cisco 7912G phone work with Asterisk? Cisco claims both phones do SIP. I was strongly considering Polycom phones. However, it appears to be quite difficult to obtain support or firmware for Polycom phones. On the other hand, I find Cisco is very well supported. Thanks, Adi

I have had a 7905G lying around for the past 8 months and have just had time to start setting it up with asterisk. I started following the links on the wiki about where to download the firmware from cisco. I signed up to cisco so I could apparently download the new firmware for the phone, but it now seems I must purchase a support contract. Is this correct? Is there any other way to get the

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031214/949c1368/attachment.htm -------------- next part -------------- Hello I have configured IP 7905G and SNOM 200 for Asterisk. Now problem is that I can call from IP 7905G to SNOM 200 but not the other way round. Instead I get "FORBIDDEN" Message on SNOM 200 LCD when ever I try

To get the SIP firmware for these phones, you need to buy a Cisco SmartNet support contract (about $75 USD in the USA, though I've heard rumors a Europe-only contract exists for about $10 USD.) You can purchase one through most Cisco resellers. That will give you access to Cisco's download site. Configuration of these phones under SIP is not quite as straight forward as it is with SCCP,

I recently got a 7905G w/ Sip software preloaded. I got it working w/ asterisk with no problem setting it up through the phone. I am now trying to make it download the config file from the tftp server. I have set all of the options in the file and the file is definately named correctly. But the phone is simply not processing the config file for some reason. Two commands Im trying to get

Justy to let you all know that i tested 7905G phone with a SIP image (latest download) and it works great ! for a reasonable price but with a good quality and a brand ... which inspires trust and helps selling better The only minus : Missing a microphone to work handsfree (or i didn't find it.) but strange enough their is a speaker ... Michael Devenijn IT DKMA -------------- next

Hi All, I'm trying to get a Cisco 7905g IP Phone to work with our Asterisk server but I'm having problems getting the phone to answer a call or make a call. I'm using the stable branch of the asterisk CVS on a RH9 box. I have got the phone to register with * and it retrieves it's extension number, date & time etc., but when I pick the handset up it's just dead silence

Hi, I recently purchased a brand new 7905g with his SIP firmware (licensed). Now, I want to play a little with chan-sccp, but I'm unable to find the appropriate firmware for my phone. I know that I must get it directly from cisco, but before purchasing it will be very good for me to try a bit; does someone can provide me (or even tell me where can I find) the SCCP image (version doesn't

Hello, I tried to configure a cisco 7905 IP phone using the skinny channel but I had not much luck. The relevant portion of skinny.conf is: [cisco1] device=SEP000F3487F8E3 callerid="Alex" <123-456-789> mailbox=500 callwaiting=1 transfer=1 context=default threewaycalling=1 line => 500 ; Dial(Skinny/500@cisco1) I set up the tftp server, and prepared the following