similar to: Eicon DIVA PCI ISDN cards (not server) work with asterisk!

What I've got... Software: Linux: Slackware 9.1 Asterisk: out of CVS - so its new. isdn4k-utils: to test the ISDN Card Hardware: PII Pentium 400Mhz (Its a test of concept machine) with 320Kb RAM 1 x ISDN BRI Card - DIVA EICON (Installed + working) 2 x Grandstream (Barbie?) BT100 SIP Phones. What Works.. I can call from one phone to the other... get read voicemail... I can

If I want to send outgoing DTMF over a BRI interface, can I do it with 'isdn4linux' or must I use the 'capi' library? -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part -------------- A non-text attachment was

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

I Purchased 4 licences for my SCSI only machine. I do have a CDROM - with a mounted CD. The Registration binary gives me a 'Segmentation Fault'. Is this like telling me I can't register the licence? Unfortunately - I only seriously scanned the mailing list after buying the keys.... Seems like the licence insists on using an IDE drive to create some sort of unique serial number.. Has

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

Hi, I'm trying to get an Eicon Diva Server4BRI card running under Ubuntu 6.06 - by downloading the v3 driver package from Melware and compiling everything. Yet, after activating the necessary modules (divas and divadidd) and interactively configuring the card (/usr/lib/divas/Config), starting up the adapter fails! The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

I'm using a Cologne chip card in my Asterisk box with zapHFC drivers (bristuff-0.0.2). The system works well, but this way I'm not able to run newer version of Asterisk. Do you think it's better to use i4l support and newer version of Asterisk or keep the bristuff with older asterisk ?? Have anyone tried chan_mISDN on a 2.6 box ? How does it run ???

Hi, > > The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces > > complains about the missing protocol image > > A: can't open protocol image: (/usr/lib/divas/te_etsi.2q0) > It is not necessary any more to download any firmware files > (they are incompatible anyway). All needed files are part of > the v3 package. > It is odd, that the file

Hello everyone, I'm having some errors while compiling the source code for an Eicon Diva BRI card. I am using Fedora Core 6 with a compiled from source Linux kernel 2.6.19. I have downloaded the Eicon Diva source RPM (divas4linux_EICON-106.12-1.i386.rpm) and installed it already. When I go to /usr/lib/eicon/divas/src/ and run ./Build, everything starts correctly until that part where it has

Following a(n apparently) failed attempt to upgrade a BT102, the phone is now brain-dead. Although it still has enough smarts to get a dhcp address and try to download the firmware and config, it never gets past the blue screen, nor will it respond to pings or port 80. Short of sending it back to Grandstream, is there any way to recover the phone? TIA Bruce Komito High Sierra Networks, Inc.

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

I'm using a SNOM 360 with Ver 4.3 software. Asterisk is.... Asterisk CVS-D2005.05.02.22.00.00-05/04/05 (BRI Stuff + Head) I've used the wiki info to set up some lines to monitor some internal extensions. When the extension is rung - the lamp comes on, when the call is answered, the lamp goes off.. I was expecting something a little more exciting - like the lamp to flash when the

Hello all, This afternoon I had a BRI line installed by Telstra (our telco in Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux driver. Incoming and outgoing calls with Asterisk work fine (and with no echo - my main reason for getting ISDN). However, I can't seem to get outgoing DTMF working (incoming works fine). I made a call from my desk phone (Cisco 7940G)

I'm sure I saw a posting about someone updating the CVS with a more richly featured voicemail system. What happened? Am I wrong? Can't seem to find anything on this... -- . . ___. .__ Posix Systems - Sth Africa /| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE / |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496 -------------- next part

I have a 'day' and a 'night' mode. In the day mode, I play a 'background' message which is interruptable by the pushing of a DTMF key - ie - all is normal. In night mode - I decided to get smarter... I play two backgrounds with a 'sayunixtime' in between and now DTMF does nothing - the menu times out to my 'lets get the operator then'... If I change the

I have a Grandstream GSX-2000 with .. Software Version: Program-- 1.0.0.3 Bootloader-- 1.0.0.3 I tried to do an HTTP update from the Grand Stream web site... After half an hour, I recycled power and now its dead... LED's come on and stay on, screen and buttons are dead. Connectivity to Grandstream.com was always good - whenever I checked (I downloaded the "User Manual" in a

I've got asterisk able to make and receive calls via the Internet via E164 lookups. If I get such a call - I'd like to display the original phone number on my phone. In the log is the following - which displayed '601' on my phone. The caller was +886288097680 - am I getting the wrong ClID because of my end or the caller end?