similar to: Help please for newb on Asterisk to Vonage

I know Vonage doesn't officially have a "bring your own device" type program, but they do offer a softphone. Has anyone gotten Asterisk to connect directly to Vonage? This would be a great help!! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060329/5bc9f644/attachment.htm

I've been reading all I can in order to try to implement an asterisk setup. In speaking with someone the other day, they advised they thought there was a way to make a SIP or softphone (gnophone) go straight out to the vonage network through asterisk. I already have vonage set up with an ATA 186. What I'm wondering is is there some way that I could direct dial from a softphone

Has anyone out there successfully set up their * box to terminate their VONAGE calls? I (and I am sure lots of others) would love to hear how you did it. I'd like to be able to get rid of the extra hardware I have hanging around here and use the ASTERISK machine to handle the SIP termination instead of needing to have a Linksys modem (w/phone) and an additional X100P card. Thanks.

Is anyone using Vonage on an FXO port in Asterisk? How well does it work? Specifically, any echo/delay problems? Second part, I am assuming it is possible to separate fxo ports for least cost routing correct? In other words, I would like the routing to be such that any local or 1-800# dials fxo ports 1-4 which is a normal 4 line analog PSTN connection. Any long distance call will try to dial

Okay, my last post for the night. So, after tweaking my iptables rules I placed a test call from my * -> Vonage softphone account, to my Vonage main account (which uses the Motorola device). Once connected I tried punching a few DTMF's to check the quality and found I had been transferred to a fax machine. ???? Did I find a secret entrance to some fax machine at Vonage, or

I just got setup with vonage.ca with the motorola ata unit.. I fired up ethreal and checked out what's flying over the network... The sniff below would lead me to believe that it might be possible to have asterisk spoof the User-Agent field and register itself? Any thoughts/feedback? Thanks. > > No. Time Source Destination Protocol Info >

Hi, I'm trying to get Asterisk to connect to Vonage (softphone acct) to allow me to place and receive calls. I have successfully configured Asterisk to route inbound calls and send them to the correct extension, but I can't get outbound calls to work. I have Asterisk successfully registering with Vonage, but when an INVITE is sent out, I get a "404 Not Found" back from Vonage

It would be cool to get one of these and see if it can be hacked and loaded with your favorite SIP or IAX softphone. Looking at the pic, it looks like the dongle is both a soundcard and memory stick. Heck, I would be glad to have it if I could get the soundcard to work. Might as well since it is free after rebate. http://www.circuitcity.com/ssm/Accessories-for-Vonage-V-Phone-VPHONE/sem

I've yet to successfully register and receive calls from my Vonage softphone. I've tried what few examples are given in former post this list and some other forums, but nobody seems to be stepping forward saying it works recently. Either they broke something to where you simply cannot use *, or the config examples need updated. If anyone can show a still working config,

Hi All, I've got an * PBX up with couple of stations and now I'd like to integrate my Vonage service for outgoing PSTN calls. Is this possible if I have an account with them that uses their hardware box (ATA186) or do I need a 'softphone' account? thanks...

Hello, Is there any possibility of integrating plans of vonage with asterisk. Regards Vijay Gandhi

All, I have been thru the archives and all the relevant URL's sent to me. I have sent e-mail to those who have gone before me and are attempting to accomplish the same goal - no one has it working?. Doesn't anyone have a WORKING asterisk pbx that hooks into vonage? Thanks, Jerry Roy 562-305-9545 -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have an IVR application that works fine from multiple DID sources, unless the call to that DID was from a Vonage service user. In this case about half the DTMF tones never get recognized by Asterisk. Has anyone else seen this? Suggestions? I'm running 1.0.9.

In taking a cursory browse at Vonage's site today, I noticed they are now offering a soft phone. Has anyone had any experience using this? And does this possibly open new opportunities for using Vonage with Asterisk? Just thinking outloud on the list, soliciting thoughts and experiences from others. AJ

Hi Nitesh, check out my config that I have for the Faktortel config in the asterisk@home sourceforge forum, you'll probably be able to work out how to set it up from there. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nitesh Divecha Sent: Wednesday, February 23, 2005 4:12 PM To:

I am new to the mailing list, but I am very interested in running my small home business office phone system using Asterisk. However, Broadvoice, a VoIP provider of choice based on my research, is not available in my area. I currently use Vonage VoIP. Their website mentions nothing about being able to link to Asterisk. I was wondering if any US subscribers have been able to configure Vonage

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

Will Vonage unlock your ATA for you for the $15? Or someone else? I have an ATA from them I would like to use with asterisk as well. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Thursday, April 29, 2004 8:16 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Vonage and * (and what

Does anyone have a working connection to Vonage via asterisk? (SIP, not ATA) I just signed up to test their service and they sent me a Number, Proxy, port and password. Every reference I have tried leaves me with a 404 error coming from Vonage. If you have a working setup, please post some config references. ? Thank You, Steven BerkHolz Soon to be known as HIROTEC AMERICA

The Vonage service is offered with a SIP Cisco ATA device for connection to an analog phone. Is it possible to connect the Vonage service directly to the Asterisk PBX bypassing the ATA and FXO card? Are there other services that offer this capability or something similar to IP dialtone? Thanks Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: