similar to: Any 24 (or 30) way FXS PCI cards?

Hi I am fairly new to Asterisk. I will have few questions on one Asterisk system: Description: I looked at Asterisk Mall says that "The TrueLine SMB PBX is perfect for the small office providing service for up to 28 Telco lines". This is a 1U Rack Mount Single T1 Asterisk Appliance. Question: Does it mean it has 7 PCI bus and takes 7x4=28 channels (if they used 7 TDM400P card

Hello folks, I'm very interested in the Digium/Asterisk combination but need some clarification. I would like to setup a SOHO for business and home use. Scenario One: I have one analog line, 4 analog telephones. Do I need a TDM400P + 4 FXS modules (Green) + X100P? Scenario Two: 2 analog lines, 1 selective ring number for fax, 8 analog phones. Is this what I need? 2 TDM400Ps and 8 FXS

Sorry for the very newbie-like question. I have the FXS part straight. The part I don't understand is the FX0 part. Will I need the FX0 card if I am connecting to a service like FWD? My goal is to get rid of my phone line all together. I am under the impression I will only need an FX0 if I'm connecting to the central office side of the phone connection or to an existing PBX. Bottom

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

Hi I have installed 2 fx0 cards into a machine 1 for pstn (out) and the other for pstn (in) However I can get the first card (pstnout to work fine) I have swapped the cards and both work I am also unable to make outgoign on the second card ztcfg -v shows r2d2:/etc/asterisk# ztcfg -v Zaptel Configuration ====================== 2 channels configured. My /etc/zapdata.conf file # fxsks=1,2

Hi: I have a machine with four interfaces connecting four different networks. I am learning to use nmap and trying to force the nmap working only one interface. As nmap man page states, I use -e option and it would not work: nmap -e fx0 -v -sP 192.168.128.0/23 Starting Nmap 3.95 ( http://www.insecure.org/nmap/ ) at 2006-02-04 14:04 CST getinterfaces: Failed to open ethernet interface (el0)

Hello, I have a strange problem with my samba server. When I try to connect with my (Windows)client and samba ask for the password, it's only accepting my linux-user password, not my samba-user password (set with smbpasswd and as root with smbpasswd <user>). And now the strange about it. When i change my sambapassword with smbpasswd, and try to login from my client, then the samba-user

Hi List Is there a cron that I con do to replace this, as the fx0 card doesnt hang up properly phonegc:/home/samantha# asterisk -r Asterisk CVS-05/30/03-17:17:07, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= Connected to Asterisk CVS-05 currently running on

I have a question on Asterisk and whether it will work with the following design. Install ASTERISK on the external side of the Network. Purchase an AudioCodes 4/8 port Analog Fx0 gateway. So far everything seems straight forward. Here is the twist. The company currently has Cisco Call Manager 3.3 which does not support SIP Trunking. But it does have a VG248. I would like to place 4 lines

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Afternoon! I have a samba server, which shares out an NFS mounted share. It seems that everything works rather well, except that i get some lag when modifying a file. If i share a directory which is local to the samba server, no lag, everything works perfectly. However, when i share an NFS mounted volume, i get about 30 seconds of lag while writing

Hi, I have updated my old 2.4.7 kernel to 2.4.19 using the full download from kernel.org and installed samba-2.2.6 Using my old kernel i can access every share and everything works fine. Using my new kernel also everything works but samba,. i can telnet the system, ftp also works ok, but windows 2k tells me server not found if i try to acces the shares. i think, i forgot something to compile to

Dear all, I have an FX0 card installed in * and connected to a PBX. Calling works ok ( both in bound /out bound) but after the call, I have to press the '#' key to terminate the call, otherwise the line stays busy. Anybody has a fix for that? Thank you. Anthony

Hello, i installed my Dovecot with authetification in MS AD throught WINBIND and PAM. Works fine. So I have virtual users with UID, GID from MS AD. I set maildir path as mail_location = maildir:/var/spool/mail/%n/ Then i want to make some vacation system. I install sieve and use dovecot LDA. In postfix main.cf I have mailbox_command = /usr/libexec/dovecot/deliver Setup of lda in dovecot.conf

Hello! In the near future, I'll be deploying an asterisk system that will have (in addition to many SIP handsets) four FXS handsets. Is there a known limitation to the length of cabling that can be used between a Digium/Openvox/Sangoma FXS card and the end station? I understand the card will need a molex power connector plugged in to provide extra voltage. With traditional phone systems, I

Good Morning Samba list, I know I don't post here often (or.. maybe ever) but i've been watching along for years. We're in a situation where we have an aging samba 3 domain.  It acts like an old NT domain, samba folks should understand that.  Its just where the capabilities of samba3 landed us.  For many reasons we want to get off of this domain, and on to something more modern, and

Hi. I was wondering if the zplex in the dev kit could be configured to have all fxs ports, instead of the standard 8 fxo + 16 fxs. If so, anyone managed to do that? Matteo. -- Matteo Brancaleoni Powered by RedHat Linux 8.0 Linux User #153521 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GS d? s:- a- C+++ UL++++ P+ L+++ E- W+++ N++ o K- w-- O- M-- V-- PS PE- Y PGP++ t 5 X+ R tv- b++ DI D+ G e

I am having problems with my zaptel channels on my fresh install of Asterisk 1.4.2 on Fedora core 6. I have a new Digium TDM400P with 2 FXO modules. Both dmesg and ztcfg -vvv show the FXO modules loading correctly: --------------------- Zaptel Version: 1.4.1 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 03: FXS Loopstart (Default) (Slaves: 03) Channel 04: FXS

Dear R-Users, I am using R for years now but recently I encounter a problem with the pdf-size of graphics generated with sweave. However, I am new in this forum. Hence, please don't hesitate if I am wrong here. I use a script which runs perfectly in R 2.11.1 and the pdf-size of the graphs is about 3 KB. Running the same script with R 2.13.1 the file size increases to 12 KB. I am using about

Hello, We have written a program (below) to model the effect of a covariate on observed values of a response variable (using only 80% of the rows in our dataframe) and then use that model to calculate predicted values for the remaining 20% of the rows. Then, we compare the observed vs. predicted values using a linear model and inspect that model's coefficients and its R2 value. We wish