Discussed a gazillion times on the list.... a) use AbsoluteTimeout b) busy_detect in zapata should be enabled (try martins code) c) possibly even callprogress (ymmv) please search through the mailing list archives for X100P hangup disconnect etc... - wasim On Thu, 18 Sep 2003, Musaluke AK wrote:> Dear all, > > I have an FX0 card installed in * and connected to a PBX. Calling works > ok ( both in bound /out bound) but after the call, I have to press the > '#' key to terminate the call, otherwise the line stays busy. Anybody > has a fix for that? > > Thank you. > > Anthony > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > > >
Dear all, I have an FX0 card installed in * and connected to a PBX. Calling works ok ( both in bound /out bound) but after the call, I have to press the '#' key to terminate the call, otherwise the line stays busy. Anybody has a fix for that? Thank you. Anthony
> I have an FX0 card installed in * and connected to a PBX. Calling works > ok ( both in bound /out bound) but after the call, I have to press the > '#' key to terminate the call, otherwise the line stays busy. Anybody > has a fix for that?Best guess with no other info is the type of call supervision used by the pbx is not the same as that specified for *. You might consider posting the relavent section of zapata.conf and, if you know exactly how your pbx is configured, some info on that line/trunk.