similar to: ZapBarge restrictions?

Hi Folks, I've been searching for an specific feature on asterisk and I found an e-mail from "John Todd" asking for the same thing. http://lists.digium.com/pipermail/asterisk-users/2004-May/045882.html To be able to listen (zapbarge, zapscan or chanspy) an specific channel and can talk to one side (the operator). That feature is very usefull in call centers in Brazil so if you want

I'm using a TE405p with all four spans enabled, two configured as pri_cpe and two as pri_net, the asterisk is sitting between our ISDN (UK BT EuroISDN30) and our phone system. We have 200 DDI numbers on the ISDN's and I need to give one of our clients dial-in access to be able to monitor calls we handle on their behalf. I've got ZapBarge working but I need to restrict the client

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

I've got a couple of different situations where I'd like to do something like zapbarge into a specific channel but I'd like to be able to actually talk to the party or parties on the channels, not just listen like w/ zapbarge. There are two scenarios I can think of right now where it'd be very handy. a) when the outside line is ringing and Asterisk is waiting to answer or

I have a couple of questions on the zapbarge: 1) zapbarge asks for a channel - how would a manager know what channel to enter ? Is there any way of being able to enter an extension number instead ? I know that you can get the information from the manager interface, but I wouldn't want to give my users access to this, or have to install / write a system just to get an extension number from a

Hey folks -- Some of you had asked about getting my modification to ZapBarge that lets you monitor active Zap channels, scanning through them with the # key. I had posted a version a few days ago that was pretty crude; it didn't check to see which channels were active and assumed you had 23. I've finished a new version that checks to see what channels are actually active and pulls

What would be the simplest way to retrieve information form a CNAM database that provides http based query responses? Does an application or script already exist that does this? Basically, I want to do a wget of a URL that contains the callerID number as a variable, and assign the returned text to another variable which can be used to set the caller ID name. Any suggestions?

Is there a way to get * to use wav files instead of gsm files for the voicemail, agents, and queues applications? Gsm does not give all the quality we would like to have, and we use no low bit rate codecs.

Hello, I've search through all of the lists and cannot find any descriptions of live monitoring (monitoring a phone call going on between an extension and a zaptel channel live from another extension while the monitoring phone is muted). I am aware of the monitor function which is actually a call recorder, but I'm looking for live monitoring from a muted extension. is this easily

Hello all I'm trying to get my asterisk config to listen to multiple ports. This is since some clients have port 5060 blocked by their ISP. Does anyone know how to do this in sip.conf or if it is even supported? Thanks!

Can anyone point me to a sample or information on using MeetMe like this? Conference room is set up with 2 PINs, one for the moderator and one for the participants. Participants get music until the moderator joins (to avoid wild, un-moderated tangents). Call is ended and all participants are kicked out when the moderator leaves (or the moderator can kick everyone out via phone keypad).

Can anyone point me to a reference or sample config for bypassing a nailed up (point to point) t1 between two PBXs with asterisk and a pair of t1 cards? Right now I have 2 Nortel norstars connected to each other via a leased line t1. I also have a solid 10mbps low latency microwave link between the 2 sites. My goal is to run an asterisk box at each end with a t1 card and Ethernet card to

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Has anyone had success with the TDM400 in production? I have multiple boxes where these cards lock up and the only thing that will fix them is to unload *, modprobe -r wctdm, modprobe wctdm, load asterisk. Does not matter if it is a FXS/FXO module. I know this topic has been discussed many times before, but my questions is not "is anyone else having this problem" since I know that

Am trying to monitor and record an in-process phone call using a remote computer and the Asterisk Manager API. Have something that is working, but the call recording volume is to low to be usable. dialplan exten => 8159,1,ZapBarge(Zap/1) remote application with Asterisk Manager API $telnet->print("Action: Originate\nChannel: Local/8159\@default\nApplication: ChanSpy\nData:

Has anyone had success with the Snom 190 displaying caller ID name and number on the Snom 190 on for an inbound call from *? Right now our Snom's only show the caller id name, not number. I know the number is transmitted from the Telco and received by * since the number shows on the incoming call event at the * console. We are not setting the caller id in the extensions.conf, simply passing

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

I have added the following to a macro that is used for all extensions so a user can access voicemailmain by pressing * during the voicemail prompt ; check voicemail exten => a,1,voicemailmain(${macro_exten}) exten => a,2,hangup The behavior is a little weird, the * key is not recognized during the portion of the greeting where the extension number is being played back, after it is

Cant submit bugs - error 1303, invalid value for field when submitting a new issue. Bug info Failure on build with 1.2beta1 on fresh FC4 install ast_expr2f.c:1784: warning: no previous prototype for ?ast_yyget_column? ast_expr2f.c:1860: warning: no previous prototype for ?ast_yyset_column? ast_expr2f.c:1259: warning: ?yyunput? defined but not used gcc -g -o asterisk -Wl,-E io.o

Can anyone shed some light on "rules" that might make the task of parsing the country code and city codes from a dialed number in the CDRs? I know that there is almost never a case where a concatenated country and city code could overlap with another country code, but what about city codes and local numbers? Is it possible for a concatenated city code and local number to match another