similar to: Yet another cisco 9760 7.x firmware failure

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Voicemail works fine for me. Post console output here to let us know what went wrong. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of John Breeden Sent: Friday, March 25, 2005 12:55 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: CAUTION: Re: [Asterisk-Users] grandstream

Hi, I got a problem of having to upgrade 35 Cisco 7960 phones from default firmware of 3.1 to 7.5. The problem I get is that when trying to upgrade I see on the tftplog that it can't seem to find the file (8 character issue). So I renamed the files to suit what is supposed to be in them. I am trying incremental upgrades from 3.1 -> 5.3 -> 7.5, with no luck. It goes to

G'Day All. So I got the TFTP server all set up -thanks to much help from this list- the 7960 found it and updated to SIP the first firmware P0S30200. What I am now trying to do is upgrate through all the versions, as recommended, to the latest version, P003-07-3-00. I thought this would be accomplished by simply changing the sole line in the OS79XX.TXT file to P0S30203 and reboot the phone.

Hello, I've recently received a Cisco 7960G phone with the factory default SCCP firmware on it. As we're using SIP on our network, the first things i've done was to upgrade but unfortunately the phone just restarted. By looking on the TFTP logs and tcpump output, i've seen that the phone crashed and restarted just after downloading the OS79XX.TXT file, without requesting the image

Hello, Whenever I put in a password/Shared Secret in my 7960 and try and get it to register with asterisk on OS X setup, the phone fails to register. Oct 31 20:03:46 NOTICE[989]: chan_sip.c:11045 handle_request_register: Registration from '<sip:575@10.10.10.46>' failed for '67.121.71.120' - Wrong password When I make the password blank in both sip.conf and

Hi all, One of our servers (very old) died last week and I'm setting up a new CentOS 5.1 box to replace it. Primarily used as a samba fileshare on a mostly windows-workstation network. This system will, ideally, have the OS on a 146 GB SCSI drive, with user data on a 300GB SCSI, both attached to the backplane of the 4600. My question is this: What's best practice and most desirable

# R for Windows will not send your bug report automatically. # Please copy the bug report (after finishing it) to # your favorite email program and send it to # # r-bugs at r-project.org # ###################################################### Dare I say the word: bug. It looks to me like a bug in conficts(). The use of seq_along in this line in base::conflicts + for (i in

I have just got a Cisco 7941G and am experiencing the exact same problem (phone is requesting .tlv file from TFTP server and never asks for .cnf.xml file). The phone originally had SCCP on it, but I downloaded and flashed with the latest Cisco SIP image (8.4(3) released 2009-01-13). In reading your message below, it looks like you were going to try an incremental upgrade?did you have any

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hi everyone. I've just tried installing the SIP image and i'm getting a very odd error. It says: Configuring VLAN then Configuring IP then Protocal Application Invalid Help!!!! Matt

I have 4 7960's that I am trying to get working but 2 of them will not update to the SIP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

Hi everyone, I'd say this question has come up and been answered before but I haven't been able to find it. I have a Cisco 7940 that I've upgraded to SIP firmware (currently P0S-3-06-3-00 - for some reason there was a failure when trying to upgrade to V7 so I left it at V6). The problem I'm having is that when I connect to voicemail the DTMF key presses dont seem to work

Does anyone know if version 3.1 is Call Manager or SIP? Thanks.