similar to: PRI Call Reference Length not Supported

I'm not a PRI expert and therefore don't know what this debug stuff means for PRI, so if anyone can help me here... I'm running the latest libpri and zaptel from CVS. Keep in mind that everything works fine when using the STABLE libpri and zaptel. I am NOT running CVS asterisk. I am running 1.0.6. asterisk*CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 T203

I am trying to analyse recurrent failure times using survfitr from the survrec package. To do this, I need to "Create a survival recurrent object" using Survr. But, when I do this, I get an error "Error in Survr(r1d[, 1], r1d[, 5], r1d[, 6]) : data doesn't match". Here, r1d[,1] is the identifier for each case, r1d[,5] is the time of recurrence, r1d[,6] is the status

Before you jump ahead, yes I do have chan_zap.so loaded.. Call Flow: Asterisk 1 --IAX2--> Asterisk 2 ---> PRI -- Accepting AUTHENTICATED call from 22.22.22.22: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host prefs = (ulaw|alaw|gsm), > priority = mine -- Executing

Hi, I am running * with E100P board. At least every our I got an Error 500 message and ISDN-PRI restarts: Jan 10 12:53:02 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 12:54:27 WARNING[98311]: File chan_zap.c, Line 5758 (zt_pri_error): PRI: Read on 27 failed: Unknown error 500 Jan 10 13:33:01 WARNING[98311]: File chan_zap.c, Line

Configuration: Linux wpbx 2.4.9-13 #1 Tue Oct 30 20:11:04 EST 2001 i686 unknown P4 2.5 GHz, 1 GB RAM T400P with 3 T1s plugged in. A flow of 46 calls (spread out over 3 T1s). Each call gets transferred (Dial) to the SIP platform and stays for 5 min. Case 1. Asterisk built out of CVS Mar. 19. Test was running for 3 days. Segmentation fault. Case 2. Asterisk built out of CVS Apr. 1. Test was running

I have not been able to get two B-channel transfer to work on DMS100 PRI. I consistently get the following errors: [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: ROSE RETURN ERROR: [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: OPERATION: RLT_OPERATION_IND [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: ERROR: RLT Not Allowed I have tried on two

Everytime I start a program with wine-20010629 on Red Hat Linux, font metrics get updated. I am getting fonts through the Xserver (no xfont server) (currently M$, ghostscript, Type1, misc and 75dpi fonts) Is this behaviour normal? Everytime this happens, I get lots of output like fixme:font:LFD_InitFontInfo DBCS fonts like '-urw-century schoolbook

Hello all, I got a problem at an asterisk server, with dropping calls, losing all channels and reaktivating all channels and beeing back up. This problem seems to occure randomly over the whole day, when it gots traffic on the card. After looking @ google I found several hints but none did work fine. To avoid problems with the phone line (german E1) I called the provider, he did a 45 min. route

I am trying to copy data from a partially corrupt backup (time machine) disk on a os x system to another. Firstly the rsync version (OS X 10.11.5): sync --version rsync version 2.6.9 protocol version 29 Copyright (C) 1996-2006 by Andrew Tridgell, Wayne Davison, and others. <http://rsync.samba.org/> Capabilities: 64-bit files, socketpairs, hard links, symlinks, batchfiles,

Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls. I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asterisk. System runs very smoothly if the calls are around 40-50 and comes one by one , however sometimes

Dear List i have upgrade my * box with the latest CVS version of Asterisk Stable 1.0 and zaptel/libpri my system is MDK9.2 with 1 TE410P and seems work well for now but i have a little amount of traffic (25 IN/OUT calls) i only notice this Warning.. What kind of error is? ------------------------------- Apr 20 21:28:49 WARNING[147466]: chan_zap.c:5979 zt_pri_error: PRI: !! Got reject for

I have 12 T1's going into 3 servers, 4 in each into "Digium, Inc. Wildcard TE410P Quad-Span togglable E1/T1/J1 card 3.3v (rev 02)" cards. Each "group" of T1's have the primary D on 24 and the secondary D on 96. The first server (ts20) and the last server (ts22) can playback "demo-congrats" fine. The "middle" server (ts21) cannot -- just dead air.

Hi all, I replaced a TE410P Rev C 1st Generation Firmware with a TE411P without any cfg changes (zaptel/zapata). As a result Asterisk crashes on outbound from PRI4 going to PRI1 calls: Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1 Aug 23 18:22:00 WARNING[4693]: chan_zap.c:7545 zt_pri_error: PRI: !! Got a UA, but i'm in state 1

Hi all- HELP! This is actually a revisit of a problem that I had earlier with E400P's at a customer site. Customer still gets locked up channel problem, but has learned to live with it (channels clear themselves after several minutes). The symptoms, which I believe are directly related: I'm having problems with tons of framing and "read" errors on my E1 connections (and

Hi! I have the chance to play with a couple of E400P cards, each installed in a IBM e330 XSeries servers (2 x 1GHz P-III CPU 2 Gb RAM, 36Gb SCSI HDD with RH8.0 2.4.18-smp kernel), and I'm trying to test/benchmark this e330/E400P combo generating calls thru /var/spool/asterisk/outgoing One e400P if doing the carrier work making calls and the other just receives the calls: Server#1

Hi, After temporarily pulling the T1 cable out of our Asterisk box, we ended up getting a strange error messages even after the cable was plugged back in. [...] Dec 10 09:01:11 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown error 500 Dec 10 09:01:21 WARNING[1192437440]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 63 failed: Unknown

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstream gxp-2000 as a SIP phone, and a normal mobile

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Hello... Does anybody knows what is the meaning of thoose messages ? What i'm doing wrong here ? The * works fine , both incoming and outgoing services.. WARNING[163851]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 47 failed: Unknown error 500 PRI got event: 8 WARNING[163851]: File chan_zap.c, Line 5683 (zt_pri_error): PRI: Read on 47 failed: Unknown error 500 PRI got event: 6

Hi, I'm installing E100P for isdn pri line. My configuration are like this. zaptel.conf ======================================= span=1,0,0,ccs,hdb3,crc4 loadzone = us defaultzone=us bchan=1-15 dchan=16 bchan=17-31 zapata.conf ================================================= [channels] context=default switchtype=euroisdn context=default signalling=pri_net usecallerid=yes