Displaying 20 results from an estimated 4000 matches similar to: "Panasonic TDA200 E1 -> E100P negotiation issues"
2007 Jun 06
3
1.4 Zaptel/Sangoma Issues on CentOS
Any ideas? Sangoma support is closed for the evening.
I have the latest Sangoma drivers and Asterisk 1.4 everything installed.
When I fire up asterisk, I keep getting "Primary D-Channel on span 1 up"
repeated over and over. The B channels never come up. There are no
errors in any of the logs, zttool, or the wanpipe tools.
Intense pri debug output:
< Unnumbered frame:
< SAPI:
2003 Aug 18
8
PRI Question
I managed to get Asterisk working with my PBX using T1, now I am moving
on to trying to make PRI work.
I have my zaptel.conf and zapata.conf configured as follows:
Zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us
Zapata.conf:
[channels]
transfer=yes
immediate=yes
callprogress=yes
language=en
context=default
switchtype=national
signalling=pri_net
group=1
2010 May 17
1
PRI down due to chan_zap.c: No more room in scheduler....Got SABME and Sending Unnumbered Acknowledgement...Any thoughts?
Hi Guys,
Running the following with a Sangoma A101D PRI card:
*Asterisk 1.4.21.2*
*LibPRI version: 1.4.10*
No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show
any activity. Problem goes away on restart of the system or maybe asterisk.
I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even
that didn't work. Anyone can weigh in this please?
2003 Nov 21
3
PRI problems
I've got a couple of PRIs coming in from a SUMA 4 switch with some 800
numbers routed through it.
When the calls come in, I get the following message on the console and the
call never makes it through:
(800 number is fake)
Extension '8005551212' in context 'nonauthenticated' from '232102749585'
does not exist. Rejecting the call on span 4, channel 1.
I do have the
2004 Jun 12
2
Sending SABME continuosly. Urgent help needed!
Hi, I'm trying to install an E1 PRI, and I need it working by
Monday, but although everything seems ok, I get no response to calls.
When I make a pri extense debug on span 1, I repeatedly get the
following:
Sending Set Asynchronous Balanced Mode Extended
[ 00 01 7f ]
Unnumbered frame:
SAPI: 00 C/R: 0 EA: 0
TEI: 999 EA: 1
M3: 3
2007 Jun 28
2
E1 not coming up
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello List,
since some days i run into the problem that one span on a TE407P is not
comming up correctly. With intense debug on that span i get:
< [ 02 01 7f ]
< Unnumbered frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
< 0 bytes of data
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
Hi All,
I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT
mode but actually I wasn't able to get it working. I've another standalone PBX, it's a
Panasonic model, which works fine connected to the same port. The BT connected to a UK
BT BRI line works quite fine after roughly a minute once connected. The PBX can be
seen at
2004 Dec 19
1
BRI Error with zaphfc
Hi
I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has
cordless DECT extensions.
I have set up asterisk on FC3 with two HFC cards and I am using the latest
bristuff.
I am trying to use * between my ISDN line and my PABX.
One card is in TE mode and can receive and make calls OK. I can make and
receive external calls to a SIP phone.
I cannot get the other card to talk to my
2008 Aug 13
1
Sending Set Asynchronous Balanced Mode Extended
So we've got a TE410P configured as E-1. The PRI is showing up as normal, I have green lights, but d channel doesnt seem to come up and i keep getting this error if i do a "pri intense debug"
The carrier swears up and down that there are no issues on their end. Any thoughts?
localhost*CLI>
> Unnumbered frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> M3:
2003 Oct 24
2
problems setting up E100P E1 germany
Hello list,
i've got some problems getting a E1 line with a E100P up and
running (germany).
# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW RED
"YELLOW RED" sounds not so good.
When launching asterisk, enabling pri debug on that span, i see
outgoing attempts:
;---------- snip --------
> [00 01 7f ]
> Unnumbered
2006 Dec 28
1
TE110P with Qsig
Hi all, as good?
I am trying to go up a board TE110P with link E1 ISDN PRI to establish
connection with a central office Siemens HiPath 4000. But I am having the
following errors:
Server1:~ # asterisk -r
Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'
2005 Jun 08
1
EuroISDN Italy - quadbri - zaptel.conf - what settings work ?
Hi,
I'm pulling my hair out, cause cannot connect to EuroISDN BRI in Italy with
octobri card from Beronet. I use bristuff and have following zaptel.conf...
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
#
# First come the span definitions, in the format
# span=<span num>,<timing>,<line build out
(LBO)>,<framing>,<coding>[,yellow]
#
# The timing
2007 Nov 20
1
Problems with losing D-Channel on
Hello all,
I got a problem at an asterisk server, with dropping calls, losing all
channels and reaktivating all channels and beeing back up.
This problem seems to occure randomly over the whole day, when it gots
traffic on the card.
After looking @ google I found several hints but none did work fine.
To avoid problems with the phone line (german E1) I called the provider, he
did a 45 min. route
2010 Jun 21
1
DAHDI: Inbound BRI call, DDI not presented
Hello-
I have a system with one D410P and one B200P (both OpenVox). All is
well with the D410P, inbound and outbound, and I can initiate calls on
the B200P BRI span, but there may be something wrong with my inbound
BRI setup: there is no indication of an inbound call when I dial in to
it from the PSTN.
When I run "pri intense debug" and make a call to the BRI span, I can
see a
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
Hi all,
Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with
Asterisk 1.6.2 and DAHDI BRI - to no avail.
I had two servers so copied network setting etc from the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16
2007 Mar 20
2
Problem with "AT&T Maintenance" protocol in PRI connection, no B+D channels available
Hi guys,
We are experiencing a problem with a T1 PRI connection. After trying a number of variations in the configuration files, the behavior is always the same: no B channels come up and the D channel doesn't appear to be working well. We can see there are AT&T Maintenance messages being exchanged by asterisk and the provider, CONNECT and CONNECT ACKNOWLEDGE, but that doesn't
2006 Oct 19
3
Bristuff qozap drivers problem
Hi,
For a significant time now (since about 0.2.0-rc8n) the qozap driver
has become very verbose if an ISDN line is not connected... I get the
messages below every couple of seconds in the asterisk logs.
The "flaw" in the messages is the "Alarm cleared" message - The alarm
cannot possibly be cleared because there is no physical media
connected into that port!!! (BTW - All
2006 Oct 16
1
ZapHFC & quadBRI D-Channel going down randomly
Hi.
I'm running some asterisk boxes on different sites,
some equipped with a couple of ZapHFC cards, others with
Junghanns quadBRI cards.
All boxes were compiled with Asterisk 1.2.10 (libpri 1.2.3 zaptel 1.2.6)
and bristuff 0.3.0 pre 1s, distribution is Fedora Core 4 with
kernel 2.6.17.3
The cards are connected to Telecom Italia's NT1/NT1+ S/T lines;
some of them are point-to-point,
2004 Mar 30
9
Zaptel/PRI problem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
I'm getting the following error at random intervals on my TE410P with Asterisk
CVS-03/30/04-11:49:01-CEST.
I have two spans active, one connected to my Telco, the other to a Siemens
PABX. Both spans display this behavior at random intervals.
All calls are dropped when this happens. Spans are not necessarily in use when
this happens.
2004 Aug 04
4
Problems with E100P
Hi,
I'm having trouble configuring and E1 link , I know the E1 is a PRI
and the switchtype is 5ess. The problem is that everytime I try to dial
I got and error saying that it was unable to open the zap channel .
Devices are created in the /dev/zap directory and I can open them with a
cat /dev/zap/1. I can also see the channels in /proc/zaptel/1.
Thanks in advance
[zaptel.conf]