similar to: Re: Polycom phones do not talk to each other

I am using PBXware for configuring users and extensions. Pbxware uses Internal script called init.sh to process the calls based on its own version of extensions.conf defined in the GUI. I have IAX2 Extensions 56 and 101 and SIP extensions 50 and 51. I have used IAX2 extension 101 and dialed SIP Extension 51 But the PBXWare's Init.sh AGI command identifies the DNIS as another IAX

>> We have bought PBXware GUI from Bicom systems and configured >> extensions >> with Polycom Phones as UAs. >> >> The Polycom Phones can dial out and make calls but I cannot make >> extension to extension calling. >> >> Googling did not help much. >> >> As you may be aware PBXware is a closed source software GUI from Bicom >>

>> Also, I'm sure you've probably checked on this one, >> but are the phones registered with asterisk? >> You can make outbound calls on them without them >> actually being registered. I'm assuming you can >> still get in and see the CLI. What does "sip show peers" >> look like? What does "sip show peer xxx" show? >> What

Sherwood, Your intentions are noble and your desire to build this, fullfills an immediate need for business. If your intention is just to build a GUI for Asterisk, read no further. If your desire is to build something more purposeful, your best bet would be to see the existing commercial GUI/HostedPBX offerings like Pbxware and Switchware from bicomsystems.com ( http://www.bicomsystems.com)

Bicom Systems releases outCALL, an Asterisk open source Outlook integration LONDON, UK (11th April 2007) - Bicom Systems announced today it has released outCALL, an open source desktop application allowing integration Microsoft Outlook. OutCALL allows users an easy way for placing and receiving phone calls integrated with users Outlook contacts. "The open source PBX market needed

Hi asterisk users, I am in need of information about how to configure the sip.conf and extension.conf for subscribers to support the dialog event package rfc 4235. I am using asterisk 1.6.0.1 version. The below are the configuration of sip.conf and extension.conf files which I have done. I have three subscribers as one from my application(App) and other are x-lite1 and

Hi asterisk users, I am in need of information about how to configure the sip.conf and extension.conf for subscribers to support the dialog event package rfc 4235. I am using asterisk 1.6.0.1 version. The below are the configuration of sip.conf and extension.conf files which I have done. I have three subscribers as one from my application(App) and other are x-lite1 and

While we have not been able to get our hands on this model yet (we have the other Linksys models) the Linksys voice products are based on the sipura technologies ATA and will work. I was under the impression that the only shipping WRT54GP2's are provisioned and locked to ATT (for now). Also keep in mind that you must be an ITSP and get authorized by cisco/Linksys to be able to buy all Linksys

Hi All, Following the latest security updates from Oracle, the version of OpenJDK package is currently listed as: java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el6_5.x86_64.rpm The Redhat security advisory lists these packages: https://rhn.redhat.com/errata/RHSA-2014-0026.html but it makes no reference to the build number, which it turns out is important. The build on the package in centos 6.5 is

Hi, I want to start managing my asterisk boxes with a centralized graphical based interface so I can (due to customers request) give control to customers to add/change extensions to their current PBX intallations such as (not complete list) Add/del/mod extensions sound recordings (ivr or voice attendants) email to fax/ fax to email voicemail to email SIP and ZAP, no IAX needed configure calls

Hi list; I am looking for an application that can be used with call center, in this application we can integrate the telephony part of the call center (like CTI Client ad so on), any one can advise for a good application to be used with Asterisk Call Center? - Note: The application to be customized easy, to be able to use it with Banking, Telecom, Oil, .. etc. Regards Bilal

Hi, My users are currently using an operator console interface like this: see it at: http://www.whssf.org/interface.jpg which came with a Praxon PDX we got about 5 years ago, which is now unsupported, it works very good and converts any analog phone plugged into the system into a powerful console, (provided you have a computer next to it) you just provide the box ip, user login, user pass,

asterisk-dev-bounces@lists.digium.com wrote: > I have a DSP based system that is working on a four port FXS system > using a 200MHz arm processor. Well.. since we are talking about this topic I owe you guys notes of my experience with SC1100 CPU used by various boards (www.soekris.com , www.pcengines.ch etc.). We made a Linux distro and compacted it into 32MB flash. Installed asterisk and

Steven Critchfield Wrote: ------------------------ Just a quick thought here, as the vast majority doesn't have access or at the minimal don't use the software you are using to do config and as it is an agi script outside of asterisk, you should go to the vendor of PBXWare and see what they say. /SNIP/ Let me rephrase my question - Has anyone faced any problem with DeadAgi script where

I have recently noticed that druid @ http://www.voiceroute.org has created an open source edition of their platform. I downloaded it today and installed it on a play system where I have about 20 ip phones ranging from cisco, polycom and aastra phones. I didn't even have to configure them as the system automatically did it for me. I have been using trixbox/freepbx combination for over that last

> Hmmm... I have this aweful feeling that I'm choosing the > exact wrong time to ask a "newbie question" :) Oh well, here > it goes. > > The quick question is : "How do I dial an extension?" > (answer is probably - "you don't" in which case:) "How do I > dial my asterisk box?" - I have no outside line, I just want >

Are there any switchvox/fonality type Asterisk based PBXs where I can buy just the software? I don't want to buy their 'bundles' that come with junky PC hardware. I just want their software/GUI to run on my hardware. Does Asterisk BE come with a GUI management console for managing phones, queues, VM and the like? -Matt -- Matthew S. Crocker Vice President Crocker

We have a Shortel system at out main site. We're putting Asterisk servers at several smaller remote sites. I know I'll be able to get the Asterisk servers to talk to each other via IAX, but can they talk to the Shoretel server? Basically, I'd like to be able to, from the main site with Shoretel, dial an extension, and reach that phone at a remote site, and vice-versa. Thank

I've been anxiously awaiting ShoreTel version 6 because of it expanded use of SIP. My plan was to upgrade out ShoreTel server at our main office to version 6, and use Asterisk in our small remote offices, and have them all be able to directly dial each other's extension. (i.e. CEO in main office can dial ext 401 and get directly to secretary at small remote office, and vice-versa)

I want to do something that seems like it should be very simple. Then again so am I ;) Anyway, I have two asterisk boxes on separate subnets. What I want is for a certain extension 3053 when dialed on the main machine to ring through to a SIP phone that is registered on the other Asterisk machine. I'm sure the information is out there I just can't seem to concoct the proper search