similar to: Regarding Incoming Calls on PRI

My question is related to an earlier discussion on the list ( http://lists.xensource.com/archives/html/xen-devel/2007-03/msg01395.html). Is there any plan for implementing gang scheduling (of all vcpus of a domain) in xen? I see that gang scheduling is mentioned in almost all the latest talks about xen (posted on xen.org). It seems to me that gang scheduling would be desirable, specially if there

I am running Asterisk 1.0.9 and have been running all my calls through a VSP over a IAX2 trunk however we have recently purchased and connected a TE110p to a PRI ( E1 with 16 voice channels ) through Optus. I can make outgoing calls via it fine, however incoming calls are dropped after a few seconds ( or as soon as a command like Playback, or the call is picked up if forwarded to a SIP

Hello. I spoke with some of the support staff at Digium regarding the Digium/Cepstral partnership. I was trying to find out when something may be available, and if there is documentation about the project. I was told that the project has already been released in to the CVS head, and is available to us now, but not available yet for the business edition. They had no documentation links

Dear all, I am from Saudi Arabiya and I am using digium hardware with asterisk 1.6. When I am executing following AMI originate API. Orginate start to execute extenstion without knowing of PSTN(FXO) channel is ringing. Any one can help me to resolve this issue ? Action: Originate Channel: Dahdi/g0/2923878 Context: outbound-ivr Exten: 1234 Priority: 1 ActionID: ABC45678901234567890

Hi There, I have an asterisk an a Digium 4 Port E1 Card On E1 Port No. 1 I have the Telekom PRI On E1 Port No. 2 I have an Alcatel PBX that cannot be changed So I have setup my asterisk between Alcatel and Telekom In extension.conf i configured: [telekom] exten => _9149.,1,Dial,ZAP/g2/${EXTEN}; exten => _9149.,2,Hangup This works great, all incoming calls are directly routed to alcatel

I am trying to setup Asterisk to act like a PBX connected via a PRI gateway to a voice netowrk where Asterisk is doing outbound overlap dialing for calls that terminate via that PRI. AFter researching through the archives and online dcocs, I thought I had everyting setup right, dialplan configured for '_X!' and the 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and

hello everybody, one of our customers which wants a soft transfer between his old pbx to asterisk and sip. the setup is as follows: telco <---pri---> asterisk <---pri---> legacy pbx everything is fine exept that when dialling from the legacy pbx it takes about 3 seconds before the asterisk start to dial. where does this delay come from? has it to do with

Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes

Hi all, I have got the following problem (E100P, pri_cpe): My number range is <6digits>xyz. (e.g. 123456-999)

Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten =>

Hello all. I have an NEC PBX connected via a TE210p E1 line to an asterisk 1.6 box. NEC -> E1 -> TE210P:1 -> * -> TE210P:2 -> E1 -> Telco Incomming calls from the telco to the asterisk box to the NEC work fine with indials and everything. Works sweet. Outbound from the NEC to the Asterisk box fail. Giving an long dial tone that then times out. Ie, pick up NEC handset, dial

Outbound calls on my Telus PRI aren't taking the Name portion of the callerID. I've looked at the logs, and it is being set (see below), but the PRI debug output doesn't show the name being sent anywhere. As a result, received calls always display from Unknown (or just the number). Is there some config that I've missed somewhere? I'm running NI-1 (Telus says NI-2 doesn't

Good Day all, I have a Fractional PRI connected to my Asterisk Box via a T100P card. When I initiate a call out to phone number 123-8888 the call sounds great no echo what so ever. If the person at 123-8888 hangs up and calls me right back (same handset on both sides) same trunk line The call always has echo on it. The Asterisk sip extension hears them selves echoing. The remote party

Hi, I have an asterisk installation that has been happily working in production for some time (E100P and UK BT ISDN30). Recently I upgraded to HEAD-07/29/04. Now, incoming callers don't hear ringing while calling in. As far as I can tell, my config files haven't changed from what was working before. Can anyone please help before my boss shoots me? JC zaptel.conf

Hi, I am lost trying to figure out how to enable overlap dialing for calls coming in and coing out on a pri span. DISA looked promising at first, but does not seem to support overlap dialing. Just picking up a call by and trying to dial out does not seem the way to do it either. I tried: [dialincontext] exten => 12341234,1,Goto(dialoutcontext,s,1) [dialoutcontext] exten => s,1,Wait,1

Hey everyone ! I have a problem in making outbound calls in PRI connection. I have E1 PRI airtel connection [ India ] [ asterisk-1.2.12.1 on CentOS 4.4 ] zaptel.conf ---------- [channels] language=en usecallerid = yes hidecallerid = no callwaiting=yes threewaycalling = yes usecallingpres=yes transfer = yes echocancel = yes echotraining = yes immediate = no ;group=0 ;context = from-pstn

so here it is, the problem that's been nagging me for the past 2 days: connected a box to my telco's NTBA <-> zap/asterisk. which works: box:/etc/asterisk# cat /proc/zaptel/1 Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" HDB3/CCS 1 ZTHFC1/0/1 Clear (In use) 2 ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

I have been messing with Asterisk for months and got it working well with a SIP connection, but this is the first time I have set it up with TDM cards. The cards are configured, working and the T-1's (configured for PRI/DCHAN) and I can even call into it if I add the DNIS as an extension to default context. That is the oddity. I can find nowhere in the documentation that says anything about

Was'nt sure if this mail got through earlier: I have been having a weird issue with my telco's ISDN PRI occasionally resetting on a incoming call, i suspect it to possibly be a timing issue since some of the incoming call work. This problem happens very frequently. I am using asterisk-1.6.0.1 with libpri-1.4.9, the asterisk server is connected viw TDMoE to a Redfone Fonebridge into