similar to: SNOM Call Diversion

I have the dtmfmode in sip.conf set to use rfc 2833 however, when my users have to enter pin numbers to join let say someone's conference bridge the pin is received twice. Any ideas on how to solve this? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050120/56ff46fa/attachment.htm

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Anyone know how I can push a firmware update to a Snom 190 without using DHCP? In the web interface, I specify a path to the Snom firmware, and it works, except I have to physically press OK to get the update to download. I need to do it remotely...

Snom 200 has be set up with extended key pad. The product literature also mention multiple sip registration. How many registration can it handle? It does not seem to appear in the user manual. David Kwok

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Hello, I have a customer who said that their Snom 360 is joining calls by accident. The situation is that they had one call on the line and another call came in. She pressed the hold button on the phone and the two calls were joined together. I do have "Call join on Xfer" set to yes, but I thought that would only come into play when doing a transfer, not putting someone on hold. The

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Hi, I've tried to use SIPSAK to understand the troubles i'm having about sending my voice to the person I've called (extension), after doing this tests below I always got this error "error: this FQDN or IP is not valid: voicegw". This could cause problems (namely audio problems)? Best regards, Helder voicegw:~# sipsak -C empty -a password -s

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. Try using host=dynamic and have a closer look at the configuration in the snom 190. Also, try using dtmfmode=rfc2833 . [general] realm = hallinux2.gwsnettech.local port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=alaw allow=ulaw allow=gsm register => 081503:xxxxxx@sipgate.de/081503 language=de tos=0x04

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I

Hi, I am using a number of snom190 phones, and an asterisk "gateway" server, and recently started experimenting with call transfers. The snom phones provide support for attended and un-attended call transfer, so I would rather use that than call-parking. I have found that un-attended transfer works fine, and that attended transfer works fine if the originating phone call is NON-SIP

Hello List- I'm having a problem getting snom 190 phones to transfer a call to another local extension. Here is the scenario: A call (call1) comes in from the PSTN to (exten1). (via pri, if that matters) Another call (call2) comes in to (exten1). (call1) is put on hold while (call2) is answered. (call2) is then transferred to (exten2) using the "Xfer" button on the snom phone. This

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

Hi All, I realise this is off topic, but its likely the best place to ask! I sent an email to snom support a few days ago but have yet to recieve a response.. Perhaps some one has found a solution to this problem already? I've searched the mailing lists and google and found nothing useful. I've also read Snom's mass deployment documentation but thats no real help in this case.

Does anybody know if there is an app that will cause similar to occur on users PC? I have a scenario where users will have snom phones on their desks. Ideally when their phone receives a call I need to popup a web browser with a specific url. Any ideas appreciated. Neil on 5/7/05 10:52 PM, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> wrote:

Found out I was doing it right, but the outbound firewalls that the Snom's sits behind has a captive portal that intercepted the HTTP request. Adding the Snom's MAC address to the firewall's captive portal worked correctly. A shortcut for any future Snom users that want to update firmware remotely: 1. In the web portal, click Advanced 2. Scroll down until you get to "Update

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GS102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels and the first

Hi, I am sorry to be asking this but the wiki is down and has been for a couple of days and I need to get this working before Monday to get my live system setup. Trying to get the Snom 190's and soon to arrive 3com 3102's to use the function keys and for the life of me I can't work it out from the conversations on the archive what I am going exactly wrong here? The snom 190 with

Hi, everyone: I'm in the processing of deciding what IP phones we should use with our Asterisk server, and I wanted to get feedback from the user community on the quality, reliability and ease of operation of Snom phones. What do you have to say about these phones? Are there other phones you'd suggest along with or instead of Snom? Thanks, -Stephen-