Helder Rogério [MICROREDE]
2005-Jan-03 04:49 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid: voicegw
Hi, I've tried to use SIPSAK to understand the troubles i'm having about sending my voice to the person I've called (extension), after doing this tests below I always got this error "error: this FQDN or IP is not valid: voicegw". This could cause problems (namely audio problems)? Best regards, Helder voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com error: this FQDN or IP is not valid: voicegw voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50 error: this FQDN or IP is not valid: voicegw -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/18989aa3/attachment.htm
Helder Rogério [MICROREDE]
2005-Jan-03 05:41 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
I've managed to resolv this by altering the machine name to
voicegw.microrede.com at this point I don't get this error anymore. But,
after some tests with sipsak I found references to internal ip's at the end
of the communication.
Is this normal? (i've marked it in bold).
voicegw:~# sipsak -vv -s sip:200@voicegw.microrede.com
New message with Via-Line:
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
** request **
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP voicegw.microrede.com:32771;received=213.63.0.130;rport=32771
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com;tag=as37d5d2f1
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:192.168.1.50>
Accept: application/sdp
Content-Length: 0
** reply received after 3.704 ms **
SIP/2.0 200 OK
final received
voicegw:~#
----- Original Message -----
From: Helder Rog?rio [MICROREDE]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 03, 2005 11:49 AM
Subject: [Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
Hi,
I've tried to use SIPSAK to understand the troubles i'm having about
sending my voice to the person I've called (extension), after doing this
tests below I always got this error "error: this FQDN or IP is not valid:
voicegw".
This could cause problems (namely audio problems)?
Best regards,
Helder
voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com
error: this FQDN or IP is not valid: voicegw
voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50
error: this FQDN or IP is not valid: voicegw
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/2e4e952e/attachment.htm
Helder Rogério [MICROREDE]
2005-Jan-03 05:41 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
I've managed to resolv this by altering the machine name to
voicegw.microrede.com at this point I don't get this error anymore. But,
after some tests with sipsak I found references to internal ip's at the end
of the communication.
Is this normal? (i've marked it in bold).
voicegw:~# sipsak -vv -s sip:200@voicegw.microrede.com
New message with Via-Line:
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
** request **
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP voicegw.microrede.com:32771;received=213.63.0.130;rport=32771
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com;tag=as37d5d2f1
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:192.168.1.50>
Accept: application/sdp
Content-Length: 0
** reply received after 3.704 ms **
SIP/2.0 200 OK
final received
voicegw:~#
----- Original Message -----
From: Helder Rog?rio [MICROREDE]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 03, 2005 11:49 AM
Subject: [Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
Hi,
I've tried to use SIPSAK to understand the troubles i'm having about
sending my voice to the person I've called (extension), after doing this
tests below I always got this error "error: this FQDN or IP is not valid:
voicegw".
This could cause problems (namely audio problems)?
Best regards,
Helder
voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com
error: this FQDN or IP is not valid: voicegw
voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50
error: this FQDN or IP is not valid: voicegw
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/bf5e80b3/attachment.htm
Helder Rogério [MICROREDE]
2005-Jan-03 05:41 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
I've managed to resolv this by altering the machine name to
voicegw.microrede.com at this point I don't get this error anymore. But,
after some tests with sipsak I found references to internal ip's at the end
of the communication.
Is this normal? (i've marked it in bold).
voicegw:~# sipsak -vv -s sip:200@voicegw.microrede.com
New message with Via-Line:
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
** request **
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP voicegw.microrede.com:32771;received=213.63.0.130;rport=32771
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com;tag=as37d5d2f1
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:192.168.1.50>
Accept: application/sdp
Content-Length: 0
** reply received after 3.704 ms **
SIP/2.0 200 OK
final received
voicegw:~#
----- Original Message -----
From: Helder Rog?rio [MICROREDE]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 03, 2005 11:49 AM
Subject: [Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
Hi,
I've tried to use SIPSAK to understand the troubles i'm having about
sending my voice to the person I've called (extension), after doing this
tests below I always got this error "error: this FQDN or IP is not valid:
voicegw".
This could cause problems (namely audio problems)?
Best regards,
Helder
voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com
error: this FQDN or IP is not valid: voicegw
voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50
error: this FQDN or IP is not valid: voicegw
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/14d01614/attachment.htm
Helder Rogério [MICROREDE]
2005-Jan-03 05:41 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
I've managed to resolv this by altering the machine name to
voicegw.microrede.com at this point I don't get this error anymore. But,
after some tests with sipsak I found references to internal ip's at the end
of the communication.
Is this normal? (i've marked it in bold).
voicegw:~# sipsak -vv -s sip:200@voicegw.microrede.com
New message with Via-Line:
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
** request **
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP voicegw.microrede.com:32771;received=213.63.0.130;rport=32771
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com;tag=as37d5d2f1
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:192.168.1.50>
Accept: application/sdp
Content-Length: 0
** reply received after 3.704 ms **
SIP/2.0 200 OK
final received
voicegw:~#
----- Original Message -----
From: Helder Rog?rio [MICROREDE]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 03, 2005 11:49 AM
Subject: [Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
Hi,
I've tried to use SIPSAK to understand the troubles i'm having about
sending my voice to the person I've called (extension), after doing this
tests below I always got this error "error: this FQDN or IP is not valid:
voicegw".
This could cause problems (namely audio problems)?
Best regards,
Helder
voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com
error: this FQDN or IP is not valid: voicegw
voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50
error: this FQDN or IP is not valid: voicegw
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/e7a51b1e/attachment.htm
Helder Rogério [MICROREDE]
2005-Jan-03 05:41 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
I've managed to resolv this by altering the machine name to
voicegw.microrede.com at this point I don't get this error anymore. But,
after some tests with sipsak I found references to internal ip's at the end
of the communication.
Is this normal? (i've marked it in bold).
voicegw:~# sipsak -vv -s sip:200@voicegw.microrede.com
New message with Via-Line:
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
** request **
OPTIONS sip:200@voicegw.microrede.com SIP/2.0
Via: SIP/2.0/UDP voicegw.microrede.com:32771;rport
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
Contact: sip:sipsak@voicegw.microrede.com:32771
Content-Length: 0
Max-Forwards: 70
User-Agent: sipsak 0.8.10
Accept: text/plain
message received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP voicegw.microrede.com:32771;received=213.63.0.130;rport=32771
From: sip:sipsak@voicegw.microrede.com:32771;tag=2b62549a
To: sip:200@voicegw.microrede.com;tag=as37d5d2f1
Call-ID: 727864474@voicegw.microrede.com
CSeq: 1 OPTIONS
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
Contact: <sip:192.168.1.50>
Accept: application/sdp
Content-Length: 0
** reply received after 3.704 ms **
SIP/2.0 200 OK
final received
voicegw:~#
----- Original Message -----
From: Helder Rog?rio [MICROREDE]
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, January 03, 2005 11:49 AM
Subject: [Asterisk-Users] SipSak: error: this FQDN or IP is not valid:voicegw
Hi,
I've tried to use SIPSAK to understand the troubles i'm having about
sending my voice to the person I've called (extension), after doing this
tests below I always got this error "error: this FQDN or IP is not valid:
voicegw".
This could cause problems (namely audio problems)?
Best regards,
Helder
voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com
error: this FQDN or IP is not valid: voicegw
voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50
error: this FQDN or IP is not valid: voicegw
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050103/34b59fb9/attachment.htm
Nils Ohlmeier
2005-Jan-03 06:32 UTC
[Asterisk-Users] SipSak: error: this FQDN or IP is not valid: voicegw
Hello, sipsak is not able to determine the full qualified domain/hostname of the machine where your are executing it. The hostname is probably 'voicegw' but that name is not resolveable via your local DNS setup. Please use the -H switch to specify the hostname which should be used in outgoiing requests (BTW this is documented in the man page of sipsak). Regards Nils Ohlmeier On Monday 03 January 2005 12:49, Helder Rog?rio [MICROREDE] wrote:> Hi, > > I've tried to use SIPSAK to understand the troubles i'm having about > sending my voice to the person I've called (extension), after doing this > tests below I always got this error "error: this FQDN or IP is not valid: > voicegw". > > This could cause problems (namely audio problems)? > > Best regards, > Helder > > > voicegw:~# sipsak -C empty -a password -s sip:505@voicegw.microrede.com > error: this FQDN or IP is not valid: voicegw > > > > voicegw:~# sipsak -C empty -a password -s sip:505@192.168.1.50 > error: this FQDN or IP is not valid: voicegw-- snom technology AG Pascalstrasse 10b D-10581 Berlin Nils Ohlmeier mailto:nils.ohlmeier@snom.de http://www.snom.com