similar to: SER vs. Asterisk - call in progress to PSTN

Hi, We are testing a SIP solution * + ser solution for a large implementation. All the clients are nated. When a client is dialing outside the domain (to a FWD sip account for example) all is perfect ! ;-) But ,when a call is done to a sip account, the client is ringing, then the caller can hear the nated client very well, but the nated client does'nt hear anything. RTP issue no ? I've

Dear ALL: My scenario lists below: Assume: UA1 with sip id "1011" And dial number to PSTN is "0939749xxx" There is no modification rule at my CISCO. (It will not change any dialed number) UA1 ==> SER ==> UA2 (SIP to SIP) UA1 ==> SER ==> Asterisk ==> CISCO 5300 ==>

First off, here is what I want to do: SIP Clients -> SER -> Asterisk -> VoIP provider Where SER will handle communications between SIP clients (since I would prefer that my SIP clients not use all of my bandwidth) Asterisk will handle calls to a VoIP provider I have read that people have similar setups working, but I have not seen any documentation of these setups. So far, SIP Clients

Is anyone out there using Lucent brand equipment to handle an incomming DS3, converting all 672 calls to SIP (as G729) and sending those to Asterisk/SER over ethernet? If you are and are willing to speak to my boss about your experiences (over the phone) with it, please contact me off list. We have a possible contract with a local CLEC to handle their long distance, and they want to send to

Hello fellow asterisk people! I have Asterisk listening on port 5061 and SER on port 5060. Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. My problems are with SIP. I can make incoming calls from SIP to asterisk and to any of the other networks, but when I try to make an outgoing call from Asterisk to SER I see the following in Asterisk: -- Executing

One for the gurus.. I have seen there has been a lot of discussion about using SER with Asterisk.. This to me seemed like an over kill becasue it would basically be doing most of what Asterisk is doing anyway unless you create some weird and wonderful config in SER.. Anyway, I decided to go and have a quick read through the SER docs and in the section about NAT they say that the best way to

Dear All, I have the following setup. Quad T1's<->Asterisk (PBX)<->(LAN<->DMZ)<->SER<->(Firewall)<->(Internet) | Local US Help Desk (Snom 200') This setup works well. I can pass calls from over the internet to the Asterisk PBX via SER using X-Ten Lit. I have a couple of questions; 1. How do I

> Hello fellow asterisk people! > > I have Asterisk listening on port 5061 and SER on port 5060. > > Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. > > My problems are with SIP. I can make incoming calls from SIP to asterisk > and to any of the other networks, but when I try to make an outgoing call > from Asterisk to SER I see the following in

Could someone give me a 10,000 foot view of what the differences are between Ser and Asterisk? I'd like to implement one or the other handle a small number of local ip phones, tie a couple of asterisk (or ser) machines together across the Internet, implement a couple of FX gateways (to handle incoming pstn calls, and for outgoing pstn calls), and use features mostly common to pbx's. No

Why is SER considered a better SIPserver than asterisk , why is it that SER can handle more clients than asterisk can. And if this is just cause of say poor SIP handling code in asterisk then is there anything being done to fix it. Just wanted to know why SER claims to be better than asterisk as a SIP server. ? -- regards Vikram (http://www.vicramresearch.com)

We have had quite a bit of success with our T100P and TE410P cards interfacing to Nortel Meridian PBXes and also to a Livingston Portmaster 3 using ESF/B8ZS and various combinations of E&M wink and ISDN PRI (usually in 5ESS mode). In the near future, I may also need to interface to a Definity via a T1. I was planning to use PRI--is that an option for you on your switch? -----Original

With all of the recent talk on the list about DUNDi, I have a question. From the outset it appears that SER is often used for high availability solutions and as a tool for almost clustering Asterisk boxes behind it. It appears to me that DUNDi is providing a lot of this as well. Now I know DUNDi is not an application by itself to proxy SIP requests but can I hear any information out there that

Hi, I know the following is mostly the issue of SER and I already posted the same content to SER User list. Just for more input, I posted it to this list. Sorry for the cross post for some people. I've set up SER for UA to UA call. I'm thinking of setting up SER to relay to Asterisk PBX to use conference call and voicemail of Asterisk. I will employ this system for client connection

Hey gang, I'm trying to work out all possible scenarios using SER & Asterisk in our upcomming deployment. The example scenario is 50 different customers, all with different numbers of SIP UAs. All UAs would register with SER; This will help keep any inter-office conversations off our bandwidth since SER doesn't handle the RTP stream. Calls from PSTN to UA are easy to handle.

I have several Asterisk servers installed and one SER server which will act as a gateway to PSTN, en redirect server. I was thinking to implement it the following way: - Register all the * servers at SER (is this neccessary?) -> this works via register=>asterisk:password@serbox in sip.conf - Setup aliases in SER for the telephonenumbers to the appropiate * server: serctl alias add

Hi, I'm trying to transfer an incoming call from the PSTN to another PSTN number through a SER - Asterisk system. SER doing only routing.. pstn call-> SER -> asterisk (call forward) -> SER -> pstn Logic for SER: If something comes from the pstn, send it to asterisk. If something comes from asterisk, send it to the pstn. Every time I am getting a "Got SIP response 481

hello all, i have a problem, and i'm tearing my hair out...any assistance is appreciated. I am trying to redirect from SER to Asterisk, both on the same machine. In 1.09 I didnt need to set up a peer for SER, just autocreatepeer=yes, and rewritehostport from SER as below, and asterisk accepted the requests without a problem. When I updated to 1.23 requests from SER to asterisk die quietly, no

Hello i am trying to use this exmple with SER-0.9.3 but still NATED Clients are not working any other requirement http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper ----------------------------------------------------------- # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters

Hi everybody, I am trying to make up call flow diagrams for for a setup which include ser as a sip proxy/registrar and asteriks as a voicemail server. Is my sequence correct?: UA 1 send an invite to SER. SER forwards this invite to UA2. UA2 sends back a sends back a 100 trying and 180 ringing message. SER forwards these. However UA2 doesnt answer the phone,so what happens then?...is there a

Hello all! I googled lists.digium.com and ser mailing list, but did not find any working configuration of asterisk used as voicemail for SER. This is my config if (uri==myself) { if (method=="REGISTER") { save("location"); log (1, "Registered\n"); break; };