similar to: Problems with SIP codec selection

Hi all, I noticed yesterday that MOH doesn't seem to work any more on my SIP channels. It works fine on PSTN calls (chan_capi) but on SIP a just get a tiny burst of sound followed by silence. I know it was working a couple of weeks ago, and I haven't made any config changes, but I have updated from CVS a couple of times. Can anyone confirm this? Jamie Neil Versado I.T. Services Ltd.

Hi, I've managed to get X-Lite (v2 build 1050) working pretty well with *, but am having problems with the DTMF signalling. I've used inband signalling with no problems on the uncompressed codecs (G711), but obviously this doesn't work with the compressed ones (GSM). However when I try to use RFC 2833 it doesn't seem to pick up "0" properly. For example if I dial the

Hello, I am trying to configure the my asterisk box here with the following **iax.conf*** [NuFone] type=peer host=switch-1.nufone.net secret=xxxxxx ***extensions.conf:*** exten => _1NXXNXXXXXX,1,Dial,IAX2/xxxxxxx@NuFone/${EXTEN} exten => _011N.,1,Dial,IAX2/xxxxxx@NuFone/${EXTEN} I have a couple of Xlite softphones and 2 analogue phones connected to a mediatrix 1102 connected to our lan.

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

I have around 20-30 softphones behind NAT .. My sip.conf has nat=yes and they all are able to register and make calls with no problem . My voip carrier supports gsm as well as ilbc .. Server takes calls from sip phones , does call recording in between and forwards to voip carrier . My problem is that half of my softphones use ilbc and rest use gsm and my provider supports both gsm as well as

Hi all, I am using to Xlite to save video voice mail. when i retreive it, then only video show , no voice is here out. Plz tell me where ,i am wrong , and how i can able to see video plus here audio in voice mail box. I did following configuration In Sip.conf videosupport=yes [phone1] type=friend host=dynamic context= employees mailbox=101 at default

I've beaten myself bloody dealing with this one... No luck so far. In summary, incoming calls from Gizmo establish, but neither get nor send sound. Outbound calls to Gizmo work fine (well a bit choppy but work) My thought is that the SIP connection is being made fine, but the RTP is getting stopped / blocked / misdone somewhere. Here is the thing: Asterisk 2.5 on Linux (No hardware

Hi One of my softphones is supposed to support g711 , however I am getting these errors and a 404 not found when I try to make a call from it. However on xlite it works fine using g711. Below is the log of the phone that is not working. Content-Type: application/sdp Content-Length: 1123 P-hint: outbound v=0 o=- 1218448446 197568495 IN IP4 127.0.0.1 s=- c=IN IP4 192.168.0.176 t=0 0

Hi, when I make a call, chan_capi always uses controller 2, and never uses controller 1 (so I have 4 lines for incoming calls, but only 2 lines instead of 4 for outgoing calls). this is with 2 AVM Fritz cards PCI. -- _______________________________ Simone Vasoli BK s.r.l. - Brain and Knowledge e-mail: simone.vasoli[at]b-k.it cell: +39 348 0830539 tel: 0187 1874200

I'm trying to call from XLite phone to PSTN (I've tried this from internet and from local network the same) The Xlite doesn't write that it is connected but receives excelent audio. At the other end comes only noise. Some times only for a second you can here the caller voice , but this was only one time :) I saw with ethereal that UDP packets are coming and going to the asterisk

Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running Asterisk) and have configured a catchall extension to receive the call: [from-pstn] exten =>

For some reason, this didn't go through the first time, maybe because I had JUST signed up. Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running

These allow and disallow work with NuFone for me disallow=all allow=ulaw allow=alaw allow=gsm Jeff Message: 11 Date: Fri, 11 Mar 2005 11:15:51 +0100 From: "Edward Banfa" <edward@radform.com> Subject: [Asterisk-Users] NuFone Configuration [problem] To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Hi all, I'm working on an implementation of VoIP en Linux. I have a Debian Suse (*.*.*.173) with an * and a X-lite client and a Red Hat 9.0 (*.*.*.172) with another softphone X-lite. Both of the softphones are registering and appear in the peers (sip show peers) with the good parameters of address and port. If I try to make a call, * receive the INVITE request and send a 404 NOT FOUND answer.

I'm currently running firmware version 3.2 on my Cisco 7960. I've seen on the list that several people are running the 5.x latest versions. I've avoided going to higher firmware versions because I'm worried about potential problems or issues with the encryption mechanism used in the later firmware versions. (Once you go to an encrypted firmware version, you can't go back,

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

Hi! As the upstream of my DSL-connection is very slow, I'd like my sip-phones to use iLBC to connect to my *. My gateway provider only allows ulaw. Hence, I'd like to use the follwing setup: SIP-phone <--iLBC--> Asterisk <---ulaw----> PSTN-Gateway I get the following error: "Unable to find a codec translation path from ilbc to ulaw" Setup SIP-phone: disallow=all

On Thu, 08 Apr 2004 10:14:09 -0400, Steve Kann wrote: >Gary wrote: > >>I have noticed lack of codec negotiation with calls thru a registrated >>asterisk box. >> >>No seen problems with outbound calls, (though I haven't specifically >>tried it), but the problem exists inbound. >> >>Easiest method for testing this was ring in via a sip client set