similar to: how do I dial extensions with oh323?

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl

Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of asterisk@home installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu

Hi Friends, Hope you would help me out here, I have searched the asterisk user list for hours and also read the readme and test files that comes with the driver. I need a very simple scenario. I have SIP clients and want to use oh323 to dial out to PSTN using a h323 gateway. a)If I set the extention.conf like this: exten => _87.,1,Dial(OH323/16.52.153.206) oh323 dials out (I can ring a

I have installed oh323 channel driver (finaly! :)). I head some problem starting * so I have put the smallest possible oh323.conf file to se what happens. When I don't put available codec's in oh323.conf (*1) Asterisk starts but he also disables h323 channel because there are no available codec's (*2). When I put codec (*3) Asterisk doesn't start (*4). What have I done wrong? I

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi Every time I hangup on my AGI script Asterisk crashes if it is not running in console mode. (happens when using python and perl AGI scripts) I'm desparatly trying to get my employer to let me use Asterisk. So I must get this to work. I've posted about this before, I'm sorry, but I'm desperate. I'm running RedHat 9.0 (kernel 2.4.20-8 everything else updated) I'm

I've been banging my head on this one for a few days and am quite stuck. I've got a gatekeeper running and everything works there. Netmeeting works calling other netmeeting clients. Netmeeting calling asterisk connects, but netmeeting can't generate the signals to make the demo do anything other than talk. But connection from ohphone always disconnects straight away. I can't seem

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Hi all, i've installed the a new pwlib (1.5.0) / oh323lib (1.12.0) on my *. Then i've installed the new chan_oh323 (0.5.6). when i try to make a call with "netmeeting" through * ( * dial out with "Dial,OH323/${EXTEN}@xx.xxx.xxx.xx" ) the call will be blocked. Before, there was chan_oh323 0.5.5 and pwlib(1.4.11) and openh323(1.11.7) installed, and it worked. Is here

Hi, I'm trying to get H323 support using asterisk 0.4.0 Unfortunately the pwlib and openh323 versions mentioned in the asterisk-oh323 readme file are no more available, and I had to use newer ones. Now I installed all libraries, but got a segemntion fault when starting asterisk while reading the chan_oh323.conf file. When I declare more than 9 gwprefix I get first a error "out of

Hi, I'm still struggling to make netmeeting work with asterisk and oh323. I'm dialing from netmeeting into a regular phone, connected to my TDM10B. everything looks great, except that I cannot hear my voice at the FXS side, just static that increases when I speak on netmeeting's mike. Nevertheless, if I speak on the telephone I do can hear my voice on my headsets. I configured

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

i am trying to make calls between two workstations using netmeeting and asterisk. i get the popup on both when i call the extensions 665 and 667 but when accept, i get this error *CLI> 0:18.190 H225 Caller:8112978 H225 Received connect PDU. 0:18.288 H245:810b388 H245 Read error: Bad file descriptor 0:18.318 H323 Cleaner H323

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

I've successfully got inbound/outbound calling working with our Asterisk using the Asterisk-OH323 channel driver. We are using a parent gatekeeper and the NuFone H323 channel driver would not work with the parent gatekeeper... I'm trying to determine a way to ensure that the line used for outbound calling is always available i.e. like trunking.. >From what I can tell when I place an

I have successfully been using OH323 v0.6.5 with Asterisk 1.0.x. I now need to move to CVS HEAD in order to use some features that are not in v1.0.x, and am trying to compile OH323 to use with it. On the InaccessNetworks site, it ways that OH323 v0.7.1 is for HEAD. However, when I compile it, it appears that it hasn't been updated since the channel structures were revamped. I get many errors,

I'm having a small issue with the oh323 implementation when it comes to codec selection. Version info: CVS Head 6/30/2004 OH323 0.6.3 OpenPhone for windows version 1.8.1 Asterisk is configured as a h323 endpoint which either terminates to the PSTN locally through a PRI or terminates the h323 call to an IAX provider remotely. Asterisk also has G729 licences installed. in oh323.conf we