asterisk users - Apr 2003 - still problems with oh323

Hi,

I'm still struggling to make netmeeting work with asterisk and oh323.
I'm
dialing from netmeeting into a regular phone, connected to my TDM10B. 
everything looks great, except that I cannot hear my voice at the FXS side, 
just static that increases when I speak on netmeeting's mike. Nevertheless,
if
I speak on the telephone I do can hear my voice on my headsets.

I configured netmeeting for CCITT u-Law, 8 Khz, 8 bit mono. On asterisk's 
side, this is what I get on the console

*CLI> oh323 show info

Information about active OpenH323 channel(s)
--------------------------------------------
0 : token=ip$192.168.0.101:3678/24464, state=ESTABLISHED, from_remote=1, 
RX/TX=8/160, format=G.711U ,

Any hint?

Yo Paulo,

You should try NuFone Network's chan_h323, which is now included in
the Asterisk-distribution.  It doesn't install by default, so you should
`make clean; make install; make samples' from "channels/h323/" to
install it, together with it's initial config-file.  Don't forget to rm
the
"chan_oh323.so" from Asterisk's modules-dir afterwards.

Apart from some minor quirks, it works pretty well with Netmeeting here.
As with chan_oh323, you should make sure that it's configured for
inband DTMF.  Good luck!



    Grtz,

      Oliver

On Sat, Apr 26, 2003 at 02:53:25 -0300, Paulo H. Mannheimer wrote:
> Hi,
> 
> I'm still struggling to make netmeeting work with asterisk and oh323.
I'm
> dialing from netmeeting into a regular phone, connected to my TDM10B. 
> everything looks great, except that I cannot hear my voice at the FXS side,
> just static that increases when I speak on netmeeting's mike.
Nevertheless, if
> I speak on the telephone I do can hear my voice on my headsets.
> 
> I configured netmeeting for CCITT u-Law, 8 Khz, 8 bit mono. On
asterisk's
> side, this is what I get on the console
> 
> *CLI> oh323 show info
> 
> Information about active OpenH323 channel(s)
> --------------------------------------------
> 0 : token=ip$192.168.0.101:3678/24464, state=ESTABLISHED, from_remote=1, 
> RX/TX=8/160, format=G.711U ,
> 
> Any hint?
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>