similar to: Vonage, broadvoice et al

Hi all, Just wondering if anyone's come across this issue, and what might be a fix for it: We've got several BT-101's deployed, and upgraded to firmware v.1.0.5.16. The phone can do proper supervised transfer, but _only_ once. If the user attempts to transfer a second time, it won't work. any suggestions/hints/tips are welcome.. Flynn

-----Original Message----- From: Chad Brown Sent: Tuesday, December 21, 2004 8:02 PM To: 'el_flynn@lanvik-icu.com' Subject: RE: [Asterisk-Users] Dialplan help - Can dial any user but not thePSTN Flynn, Yes, that makes sense. However, in my case I have incoming calls arriving on an IAX channel from a PSTN gateway. I think the concept is the same. That said, if incoming calls have access

Hi all, I used to have an OpenLine4 card, but decided against using it due to some problems with hangup detect. Does anyone on the list actively use Voicetronix's OpenSwitch12? What are your opinions on the card? Cheers, Flynn

I just started poking around with writing a python module to interface to the Manager API, and it suddenly hit me... how the heck are you supposed to program this thing? All the events seem to be dumped to all the open connections. If I send a command, such as a login, there seems to me to be no way to determine which response are intended for me, and which may be intended for another open

hi all, i've got a proposed setup that i was wondering if you guys could comment on. the client wants * and a couple of SIP phones to be on a separate network than the rest of the office, so that in case their primary network crashes for some reason the PBX won't be affected. one other factor: the client may at some later point set up SIP UAs sitting on the primary network that will

Hi there, I've got an installation where there's 12 POTS line incoming into *, and am trying to get some insight as to which VoIP hard phone would be most suitable for this scenario. Most of the VoIP phones I've looked at only have 4-6 line presentations; is anyone aware of one that has more? I tried to get some info about Snom's Keypad 220 since it has loads of programmable

I am currently developing a asterisk ncurses interface using the manager API. The project is currently awaiting sourceforge's approval but I have a beta online at http://sig.lange.googlepages.com/assman . The projects real home will be assman.sf.net. This project really consists of two parts, libassman is a C manager API and assman is the ncurses portion. It's still beta but I have been

Hi, I'm running two boxes side by side, identical specs and setup but with differing dialplans. Both are on ast/zap/libpri versions 1.0.9. Both boxes share the same folder for voicemail, exported via NFS from another file server. Everything was working fine for an extended period of time, until just recently when someone rebooted Box A. Now when I dial an extension associated with a SIP

Hi all, I was wondering if anyone had any pointers on how to determine whether or not a module has gone wonky on the TDM400P? I have a 2 FXO (channels 3 and 4) and 2 FXS unit (channels 1 and 2). The bad (?) module in question is the FXO module on channel 3. I can't dial in to or out of that channel; dialing in gives a busy signal, dialing out just shows * hanging around after attempting a

Hello, I am very new to asterisk and voip in general and so far have managed to get the FXO card and a few sip phones working fine. My question is where does the Sipura SPA 2000 come in the picture? Can it be used as an extension (i.e FXS) ? Or is it to be used as a line (i.e FXO)? Or it can be used as both? My understanding is that its just like another ATA186. Is that true? I guess what I

Consider this dialplan fragment, where the call is being dialed into [macro-process-routing] over an iax2 channel from another (same build) Asterisk server: [macro-process-routing] ; This is the entrypoint of the debug call but is also refered to by Macro(process-routing) elsewhere in the dialplan ; XXX-NNN-6800 exten => _6800,1,Macro(6800-interceptor) ; This is matched when 8 is

So Asterisk can't send VOIP calls to Vonage -- but it is still possible to use Vonage for flat-rate long distance by connecting the Vonage AT-196 to an * FXS port, right? The price is an extra D/A <--> A/D conversion. Jim Shilliday IT Director Equal Justice Center 1315 Walnut St. Suite 400 Philadelphia PA 19107 215-238-6970 -----Original Message----- From: Tim Petlock

-----BEGIN PGP SIGNED MESSAGE----- Greetings, I've just about got Asterisk up and running and am wondering the following. Currently, I subscribe to both Vonage and Broadvoice and as such, I've got a Sipura and Cisco ATA186. Although I'm sure this is expressly prohibited somewhere in my service agreements, can I reprogram these devices to access my own asterisk server rather than

I am trying to connect to a vocal server from an asterisk server. A call is received via iax2 to my asterisk server. I then initiate a SIP connection to the vocal server. everything works great except dtmf doesnt work. A cisco 5300 can connect to this vocal server and do dtmf without a problem. I have my dtmf set to rfc2833 in the general section of the sip.conf . I can confirm that the

Hi folks, It seems that BV has messed it up yet again. I noted this weekend that any call going in or out had no incoming audio. All my other SIP providers seem to be OK. Is anyone else having this problem? Perhaps it's time to move on. What providers do you recommend that provide unlimited US/Canada and Western Europe? Thanks Mark

Hello all, I'd like to mention that we've put together a simple Java-based application that provides a somewhat point-and-click interface to create an Asterisk dialplan. You can get to the dialplanner at http://www.lanvik-icu.com/asterisk/dialplanner/index.php You can create contexts and extensions, then select the appropriate command from a list. Then you'll be prompted to enter the

There was a flurry of "Vonage is going to unlock SIP" activity last year; did anything productive ever come of it? Are *you* using your Vonage lines directly into Asterisk? In lieu of that, for a 4 line small business that doesn't need to pay Vonage $150 a month, who? Broadvoice? Someone else? I'm a touch unimpressed with the fact that BV's website *won't quote you

I setup a vonage account last year, and cancelled it last night when I put my asterisk box together and signed up for a Broadvoice account to use with it. Now I would like to use my Linksys router as an MTA, but realize it is still programmed with all of vonage's proprietary information and I do not know how to clear it. I understand that just pushing the reset button will not do it.

After months of BroadVoice ignoring my trouble tickets for dropped calls, delayed termination, etc., I'm throwing in the towel. While they have credited $19.95 to my account, they refuse to credit anything more, despite ALL of the problems I've had. I feel the least they could do is credit the remaining $8.61 to my account, yet they won't. I haven't really been following up on

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Am 06.02.2015 um 21:36 schrieb Guus Sliepen: > On Fri, Feb 06, 2015 at 09:01:21PM +0100, Flynn Marquardt wrote: > >> Analyzing a routing problem in a tinc net I found, that a declaration of >> a class-A subnet (x.0.0.0/8) in a host configuration file is ignored, e.g. >> >> Subnet = x.0.0.0/8 > [...] >> Splitting