similar to: Zaptel DACS and FDL

from the zaptel sample config: # "dacs" : The zaptel driver cross connects the channels starting at # the channel number listed at the end, after a colon # "dacsrbs" : The zaptel driver cross connects the channels starting at # the channel number listed at the end, after a colon and # also performs the DACSing of RBS bits dacs=1-24:48

First of all - Many, many thanks to Mark for his troubleshooting and fix of bug 1320 (FXO_KS signalled Zap Channels on Adtran 750 Channel Bank Stuck in Rsrvd State). I have heard complaints that once every couple weeks, when a user picks up their analog phone (t1 span off of a TE410P into an Adtran 750 with 6 FXS cards), they don't get dialtone, but instead, hear another conversation.

I have a T3 coming from my carrier. From there I want to use an Adtran mx2800 T1 Mux to break the T3 into 28 T1/PRI which feed into seven quad T1/PRI equipped servers. Everything seems very straight forward with the exception of the D channels for the T1/PRI. I am not very familiar with large circuits such as T3s. I know that I can use one D channel per set of quad port on each server. So if

After speaking with several people, and even participating in a forum of several other people with echo issues, I thought I'd share what we've done (well actually what our chief R&D engineer, Brett Bourn has done...) First let me say that normal cheapy PC hardware couldn't be made to function with out echo. We tried on both the single port Digium T1 card and the 4 port Digium T1

We are an asterisk user... small time system 50-100 users or so. But, we have an opportunity to get into a big time telecom activity. It would have 2000 to 30,000 user lines per city, and we would like to have those brought back to a central location for control and because transport can be more economical than remote site rentals, maintenance and personnel. We could take the local lines into

Hi All I have problem with LIBMFCR2 for once Exchange I using Sangoma card, the firstly. my ssystem run successful with MFCR2, connected to E10 (Acatel Exchange), after that, i move connection connect to EWSD (Siemens), my system don't work. error protocol R2. my system: Asterisk CVS 1.1.X LibMFCR2 pre.005 and unicall-pre.005 this's my setting and my setting wanpipe1.conf

Hi, this is to inform everybody that the translation of my new book (unstable version) is online at http://www.the-asterisk-book.com The book is a GNU FDL project. So everybody who wants to participate is welcome to do so. Also, everybody who needs material for his own work, feel free to take it as long as the new material will become GNU FDL too. I am glad that Stephen Bosch (who you

Greetings folks, I'm currently dealing with a company to let me set Caller-ID-Name on outbound calls. So far pretty happy with their services. The basic service works like this: * CLEC sets Point Code to point to this company * CLEC has to sign LOA saying they give me permission to set the Caller-ID-Name through this company. * I go into web interface and set name. However, the CLEC is

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

As is my routine every couple of weeks, I ran Pest Patrol anti-spyware software, and was disturbed to find it came back saying that the file FLAC/COPYING.FDL was a security exploit known as "Virus Tutorial" or VTool/jul2. This has left me wondering if FLAC is to be trusted. Here's what PestPatrol's web site has to say about it: Exploit: A way of breaking into a system. An

Using a SIP connection with a CLEC, the downstream (received) audio is perfect when the mute button is activated on the phone. However, when there is upstream audio (i.e., talking or even breathing into the microphone), the downstream audio is cut off. It's kinda like having a half-duplex audio connection. When I divert outgoing calls to another provider, these calls are fine.

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the

Em (20:59:21), Asterisk Users Mailing List - Non-Commercial Discussion escreveu: >On Tue, Jun 21, 2005 at 08:09:52PM -0300, Alessandro wrote: >> >> Does Somebody know why no load modules to FXS? I used zaptel-1.0.7 >> version. > >What color are the modules? >Post your /etc/zaptel.conf > >-- >Mike Mike, The color is green, red ans bluw. Link

Heya everybody. I have been peering into the code for zaptel for a while now, I am keenly interested in the dacs support, being able to apparently redirect certain spans to other spans. Not sure if this has to be on the same T1 interface or can be used between T1 interfaces on the same board or possible two different cards. Any information on the functionality of this would be greatly

Hello All, I could use a recommendation if anyone has a moment. I have the T100P but I have not gotten my service yet. I want to have at least 12 lines of digital voice with DID. Should I just seek out a PRI ISDN provider or is there something else I should look for? I want to keep cost as low as possible. Also, I want to own my own router for the phones since it is always a hassle to get

Hello, I have just received Adtran TSU 600 with 24 FXS ports. I have installed sucessfuly T100P card. Adtran is connected to t100p with crossover T1 cable. On T100P card I have a green light and on Adtran I do not get any errors or alarms. But I do not get dialtone on FXS ports. Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. In zaptel.conf: span=1,1,0,esf,b8zs

I have a test install set up as follows Grandstream 102 ---- Asterisk ---- X100P ---- Adtran Express 3000 --- ISDN line to PSTN Most things I want to do work fine except I do have some intermittent problems with an echo. I am assuming that this is created in the link between the X100P and the Adtran terminal adaptor. I am not sure of the proper terms but on the PSTN side of the Adtran there is

Rich Hi, After Qwest pronounced my circuits as within spec. (yes, disconnected from the house) I listened on the lines with my butt set. Clear of all noise and hum. I then got my box of Cat3 and laid a circuit around the outside of the house and into my lab. Still clear of all noise and hum. I then connected the circuit to the Adtran and made a call. Lots of hum and buzzz. As I said,

All, I need help. I have an (actually 2) Adtran TA750's with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone on each incoming line, I have no buzz. I also have 2 Carrier Access Access Bank I's with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or buzz whatsoever. I went so far as to move the TA750

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44