similar to: E1-PRI: Warning Message: Unable to handle ROSE operation 36

Hi. recently I have been trying to setup a PRI on asterisk. Inbound calls are working just fine but I am not able to make outbound calls. Does anyone know what I need to change to make outbound calls work? Right now the PRI is instantly hanging up on the outbound calls. I have included full debug info as well as config files. /etc/zaptel.conf span=1,1,1,esf,b8zs bchan=1-23 dchan=24

hi, i have the problem that i'm not able to set and receive the Service Indication (SIN) from our E1-PRI and from our ericsson BP250. The problem is, that the Bearer Capability (BC) together with the High Level Compatibility (HLC) and Low Level Compatibility (LLC) forms the Service Indicator (SIN). The SIN is used to determine if the call is voice, fax or data. It's essential to set

PRI debug of the entire call would be great, also, switchtype would be awesome as well. Thanks! Matthew Fredrickson On Thu, Mar 24, 2016 at 4:07 PM, Carlos Rojas <crt.rojas at gmail.com> wrote: > Hi > > Did you activate the pri debug on the cli asterisk? > > On Thu, Mar 24, 2016 at 12:59 PM, Carlos Chavez <cursor at telecomabmex.com> > wrote: >> >>

We've been having some problems with an E1 PRI line for a few days. We get the following errors: [Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 ROSE REJECT: [Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 INVOKE ID: 316 [Mar 24 10:13:39] ERROR[22009] chan_dahdi.c: PRI Span: 2 PROBLEM: Invoke: Unrecognized Operation The telephone company says that

Hey all, I am running a Asterisk 1.2.9.1 with Sangoma A101 card, newest firmware, configured with a help from Sangoma Tech Support, running fine. It is connected to a PRI circuit split from Cisco MC 3810, which in turn is connected to a Converged T from CTC Communications. While Asterisk works fine and I can call in/out on my BV account, I am only able to dial in through CTC. I have spent

Dear R Gurus, I spent some time in looking for help but didn't find a way to do what I want. I do have a vector (in Degrees) containing of 360 elements, one element per degree on a circle. The data is dimensionless and in the range of -0.2 to 0.5. An Example: Wind Dir [degrees], Value 1, 0.1 2 , 0.3 3 , 0.01 .,. .,. 180,-0.01 181,-0.2 .,. .,. .,. 359,.0.3 360,.0.5 Now I want to have

David, Following on from Jim Lemon's suggest that polar plots might be more what you need, there are both wind rose and polar plot functions in the openair package that might be of use (particularly windRose and polarFreq). They will not do everthing you are after without some careful conditioning or extra work with latticeExtra, but could get you some of the way there. Karl Ropkins,

Hi, i am getting the follwing messages with asterisk 1.0.5 [...] Feb 28 16:13:05 VERBOSE[8899]: !! Unable to handle ROSE operation 34 [...] Can anybody gibe me a hint what is is about ? Greetings, Martin

Hello, Everyone. Does anyone know how to create a Nightingale’s Rose chart by using R? Hopefully, the graph could be displayed like this: http://mbostock.github.com/protovis/ex/crimea-rose.html Thanks a lot. Kind regards, Henry [[alternative HTML version deleted]]

Having a problem w/ not getting CID name from a PRI. CID Name appears in the PRI debug, but even after a Wait(4) it still appears after the phone is ringing. Here is the relevant info from my PRI debug output. Line 4 is a NoOp showing me trying to echo Name and Number. Line 6 dials the extension, and you can see callerid name get presented on line 29. Again, there is a Wait(4) before the

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>

A wind rose plot omits time information. Your request is simply not possible. On October 30, 2024 3:48:03 AM PDT, javad bayat <j.bayat194 at gmail.com> wrote: >Dear all; >I am searching for a way to extract wind direction and speed from a wind >rose plot. I have a graph and I want to make a dataframe of 5 years with >hourly intervals. > >> start_date <-

Dear list, I trying to make a wind rose plot whit the command oz.windrose, from plotrix package. My data, a matrix of percentages with the rows representing speed ranges and the columns indicating wind directions was generated using bin.wind.records command from same package: [,1] [,2] [,3] [,4] [,5] [,6] [,7] [1,] 0.4405286 0.0000000 0.1468429 0.4405286 0.4405286

I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a Meridian Option 61C. Calls either way drop with error "Channel 0/23, span 1 got hangup, cause 100". Can anyone offer insight into the cause and solution/workaround? (I tried upgrading to Ast 1.4.13, and upgrading matching zaptel & libpri, put the problem is identical). For testing, I tried a call from the

Hi, Is it possible to create Rose Diagrams of wind data (speed & direction) with R?? Best regards, Lars Peters ----- Lars Peters University of Konstanz Limnological Institute D-78457 Konstanz Germany phone: +49 (0)7531 88-2930 fax: +49 (0)7531 88-3533 e-mail: Lars.Peters@Uni-Konstanz.de web: Lars Peters <http://www.uni-konstanz.de/sfb454/tp_eng/A1/doc/peters/peters.html>

hi, after several problems getting the right callerid on a E1-PRI there is (so far) only one problem left: when receiving calls over the telephone network from another E1-PRI that has a "Caller ID no screen" capability (e.g. a bank and a customer of us), asterisk does not get the callerid that is set up by the calling PBX, but the callerid of the trunk of the calling PRI. no matter

Dear R users, First just want to say thank you to all for developing such a wonderful software and packages. I need to produce a wind rose plot. Tried with packages circular and plotrix and couldn't quite get what I want. Moved to package ggplot2 and it's going great. However stuck in how to move axis labels. I am using the wind rose from the help to learn how to do what I need (code

I am looking for a function (or package) to plot histograms of directional data such as wind direction. I believe these are called rose diagrams. Is there an R script for this? If not, can it be constructed in a function calling primitive graphic calls (lines, circles, boxes or polygons)? The stars function is not quite right. -- David Finlayson Geomorphogist and GIS Specialist NearPRISM -

hi, i'm having problems getting asterisk spliced between an E1 PRI (german Telco Arcor) and an Ericsson Business Phone 250 digital PBX. The Asterisk Server has a TE405P with it's port 1 connected to the E1 PRI provided by our telecommunications provider Arcor and port 2 connected to the E1 PRI of our Ericsson BP250. the setup before: Arcor TelCo PRI(E1)

Dear all; I am searching for a way to extract wind direction and speed from a wind rose plot. I have a graph and I want to make a dataframe of 5 years with hourly intervals. > start_date <- as.POSIXct("2019-01-01 00:00:00") > end_date <- as.POSIXct("2023-12-31 23:00:00") > time_sequence <- seq(from = start_date, to = end_date, by = "hour") > df