similar to: Dlink VPNs??

Hi, I have a dlink dvg-1120M (mgcp) box that i will like to use with asterisk. Is it possible? has anyone done that? Here's a link to the product page at dlink. http://support.dlink.com/products/view.asp?productid=DVG%2D1120M Also, does anyone has or know where to get the firmware for Dlink DVG-1120S (sip model)? thanks. -- Zahid

Anyone know how to set up port forwarding of multiple ports on a DLink DI-604? I successfully portforward the SIP port on the Advanced|Virtual Server page. It works because I can register a SIP client, but it's a single port - 5060. The DLink doesn't seem to provide an obvious way of portfarding the 10000 - 20000 ports needed for RTP. Any ideas? Hugh

I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has used you it with asterisk. They were only $65. I have tested with the Linksys Pap2 and found that box to be fairly nice except for a lot of backgound/white noise. I was wondering if any else had experienced that? Let me know if I've wasted $65 on the Dlink and also if you had similar experience with white noise on

Well i did it, i finally broke down and bought a hardware based media player, the dlink dsm 320. Not only can i watch my dvds from my pc, but listen to my 30+gb ogg vorbis collection, create a playlist file (.pls format) with shoutcast and icecast2 streams (mp3 only) and crank them through the home theatre system. Just a heads up though, even though it supports shoutcast and icecast2 mp3, the

Hi, I configured 2 vpn's between 2 servers. When starting the tinc on each server. De 2 vpns's look like 1 vpn. Can tinc be configure for multiple vpn's between 2 hosts or more. Lets say there are 3 servers A, B and C. I want a tinc vpn between host A en host B. And a second vpn between host B en C without is becoming one vpn. And for example a third vpn between host A en host

Does anyone have any experience using this DLink quad FXO <> SIP gateway with Asterisk? I'm still looking for an analog interface that I can live with, having tried X101p, SPA-3000 and TDM400...all with less than desirable results. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power

Sorry for the ignorance. Would I be able to install and run the DLink USB Wi-Fi drivers via Wine?

Hey Everyone, We are in the works of planning a new * installation for our company. We have 20 users in our main office and 5 users in a remote office a couple of states away. Our call volume for the main office will be anywhere from 5-10 concurrent calls. The remote office will have about 3 heavy users with two users making calls occasionally. Right now we have an existing PBX. We have a

After 20 cups of strong coffee and wasteing most of tonight and obviously doing lots of googling and emailing many people, i've concluded that dlink voip phones specifically DPH-80 dosent work with asterisk. If anyone has had anymore luck with these phones then me please let me know -- regards Vikram

I'm still a learning but I purchased a dph-140s to test with AAH 1.5. I think this is a rebadged ACT P104SLD which others seem to have working with *. It seems to be configured and registered similarly to the softphones I've been using just fine, but it does not receive or send audio (it will send audio to vm), or perform the loopback test. It seems to signal and receive calls fine. The

Hi Everyone, I've been happy with my setup the last 2 years, and I just bought a new router - D-Link DIR-655. I was connecting wireless and wired and noticed the following before tweaking: Wired 100 Mbps ============== Macbook to Ubuntu: 56 Mbps Windows to Ubuntu: 72 Mbps Wireless N (Connected at 130 Mbps ... Apple's fault) ================================================== == Macbook

For those of you that have dlink VoIP hardware, I thought I'd post this link. It's a whole lot easier that navigating their support site trying to find anything. There is updated firmware for most of their products. ftp://ftp.dlink.com/VoIP/ A word of warning about the DG_104S firmware. It's better than the firmware that came with my box, but it still has quirks. Some settings

Does anyone know if this unit works with Asterisk? Thx. B.

Hi all, I'm making a small voip network with asterisk and Dlink dg102s gateways (MGCP). Dlink gateways work with g.711, g731 and g729 codecs. The questions: do i need a g729 codec license for asterisk for dlink use g.729 or just configure asterisk to inform gateways to utilize then ? Anyone have a .conf(s) example(s) to send-me ? Thank's Alexandre da Rosa --- Este e-mail foi

Hi, I'm playing around with Asterisk and DPH-100M (Dlink mgcp phone) on my debian box. I've got stable version of Asterisk (packaged for debian) working with dlink phone and 7910 from cisco (minimalistic extensions.conf and chan_skinny for 7910) Everything works fine. Now I'm trying to get CVS HEAD working with MGCP. I want to test chan_sccp

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) --

I've got one of these on the way right now - BestBuy has a special on them and I think Buy.com is doing a 30$ rebate. I gather that it's based on the ZenSonic units which supposedly supports Ogg, but that particular bit of code isn't quite up to speed yet. > Well i did it, i finally broke down and bought a hardware based media > player, the dlink dsm 320. > Not only can i

I have seen this product before and wondered, has anyone connected this to Asterisk? http://www.i-2-eye.com/index.html As far as that goes has anyone seen a set top box video phones that work with Asterisk? -- Bruce Reeves Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there anything special that anyone here has had to do to get an Aastra phone (on the Internet) to talk to Asterisk behind a PIX firewall? Ports 10000-20000 UDP are open on the PIX and forwarding to the Asterisk server. The Asterisk server's RTP.CONF is set to use 10000-20000. The phone registers, and will place AND receive calls, however, no audio is passed. The phone is an Aastra

Hi all, I''ve just installed a new Xen setup, ubuntu gutsy (with xen kernel package, so I guess that''s a complete replacement). Mostly works nicely, i think Xen''s great. I''ve just hit a snag when trying to transfer a large amount of data to the machine however, i''m using a PCI DLink gigabit network card (as the mobo onboard is the infamous realtek