similar to: No ring tone on Outgoing calls

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

Many thanks in advance for anyone that can offer help on the following questions: Asterisk Box Using Asterisk@Home build and updated Asterisk to v2.1 P4, 400 Mhz, 384Mb RAM, 40Gb HD 4 OEM X100P Cards Phones Grandstream GXP-2000 2 * Grandstream BT-100 HandyTone 486 Sipura SPA-3000 Questions 1) When someone calls in to one of the FXO lines, there is a 3-4 second delay before the configured

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode {

Hi Everyone, I have a SIP turnk which works fine with both inbound and outbound calling. However, the only issue is that there is no Ring Tone if someone calls us. The phones used are Aastra and Polycom connected to the PBX via VPN (SIP). I do get an outbound ring tone, so it's not that there is any media loss between the phones and the PBX. But when the DID is called there is dead silence

For some reason Asterisk is producing a US ring tone when it should be an Australian ring tone. I am using ztdummy and do not have any cards installed. My configuration is as follows. I am using Trixbox 1.2.2. Can someone please guide me into the right direction? zaptel.conf loadzone = au defaultzone = au zapata.conf [channels] language=au indications.conf [general]

I upgraded my Cisco7960 to SIP 8-2 from 7-4. Everything seems ok, works fine. Except that when I make an outbound call, I get a double-ring sound. I also found that if the target number is engaged, I get a ring sound and at the same time get a busy sound. If I revert back to 7-4, there is no problem. Anyone else had this, or any clues on how to fix it ? All of our other phones are still on

I once (for a brief period) had dialtone, but I do know why :) Otherwise I get a boooop-booop-booop sequence. I cannot tell if this is the D-Link doing this, or asterisk... Who should be giving solid US dialtone? My indication.conf says: [general] country=us ... [us] description = United States / North America ringcadance = 2000,4000

Good morning everybody, Can someone explain to me the interconnection between these four things: indications.conf, SetLanguage(), zaptel.conf and ring-back ? If there is any !! :- ) I am having this case where some users cannot hear ring back from a DeadAGI script and it seems to be interconnected to these items. These users are from the iaxfriends table, they _can_ hear ring-back from a

Environment: Asterisk 1.2.14, FreePBX 2.2.0, Aastra 480i IP telephones firmware version 1.4.1.1077. Problem: Intercom feature: the dialed phone does not play the splash tone when auto-answering an intercom call. Otherwise, intercom works perfectly. Questions: What is the extensions.conf syntax to trigger a splash tone in Asterisk 1.2.14 (from the documentation and posts I've found, it has

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hey - I know there's some other people out there that have the 9133i ... has anyone gotten the DTMF tones to work after the far side picks up? I didn't have any problems out of the box with my SPA-841 phones... the aastra has been nicer so far, but I can't seem to get it to dial the touch tones after an auto-answer device picks up on the far side... I googled, to no avail. -Karl

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi list, Has anyone been able to get ISDN-BRI support to work reliably on Asterisk 1.4? If so, I'd love to know how you did it (hardware, distro, kernel, modules, versions, config files). I've tried to get it to work on a Debian etch system with an HFC-PCI card and the zaptel package (v1.4.7, also from xorcom.com), but with no luck: all three channels that are created when the

Hi! I have configured a SIP trunk with a dialing rule. The trunk behaves normally for incoming calls but when in used for outgoing call a strange thing happens. When I place a call I cannot hear the tone confirming that the remote phone is ringing. I simply hear the voice as soon as the party picks up. When the remote phone start ringing Asterisk receives a SIP packet stating that the call is

I've been looking at the two phones Aastra 9112i and 9133i for our offices now. I was just curious if anyone could tell me about the ring tones. Specifically: 1) How many ring tones do they come with? 2) Can you upload your own ring tones? 3) If so, what format and how? (wav, mp3, gsm, etc. and TFTP, web management, flash, etc.) Thanks for any help. -- Tim DeBaillie 812-476-2721

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20031111/8683cced/attachment.pgp

Hello, I have a problem with connecting a Digium X100P card to a Brazilian analog line. Can somebody help me out with this problem? My /etc/zaptel.conf is loadzone=br defaultzone=br fxsks=1 My /etc/asterisk/indications.conf [general] country=br [br] description = Brazil ringcadance = 1000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/4000 congestion =