similar to: Everyone is busy/congested

I'm trying to convert an S-Plus program to R.  Since I'm a SAS programmer I'm not facile is either S-Plus or R, so I need some help.  All I did was convert the underscores in S-Plus to the assignment operator <-.  Here are the first few lines of the S-Plus file:   sshc _ function(rc, nc, d, method, alpha=0.05, power=0.8,              tol=0.01, tol1=.0001, tol2=.005, cc=c(.1,2),

Greetings all, I'm new to asterisk... Finally got two IP phones and two TDM400P's (one with four FXO modules and one with four FXS modules)... Began experimenting a couple days ago and have ran into a very aggrevating problem. My system consists of the following hardware: Abit BL7-RAID motherboard Pentium 4 1.6GHz processor 512MB SDRAM 2 TDM400P cards 2 3Com 3c905

Hi all, yesterday afternoon, I called through my provider (teliax). but from the evening, I get this error. (below). then I checked in My Account page ans support page in teliax. and I saw that they have given new setting (to another proxy sever). I followed new settings. my Asterisk server is connecting to the teliax. but still I con not make called. it shows this error. If somebody had this

The REV I card shows up in the PCI table as: 02:05.0 Network controller: Tiger Jet Network Inc. Intel 537 (or 02:05.0 Class 0280: e159:0001) Subsystem: Unknown device b119:0001 But the REV E/F shows up as: 02:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (or 02:0d.0 Class 0780: e159:0001) Subsystem: Unknown device b100:0003 One

arm: implement exception and hypercall entries. xen/arch/arm/xen/Makefile | 3 + xen/arch/arm/xen/asm-offsets.c | 61 ++++++++ xen/arch/arm/xen/entry.S | 596 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ xen/arch/arm/xen/hypercalls.S | 67 +++++++++ xen/arch/arm/xen/physdev.c | 41 +++++ 5 files changed, 768 insertions(+), 0

Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and zaptel (1.2.5). The problem is that 6 modules can't be initaized and i get the folowing error: May 7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No such device May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such device here = 0, tmp->channel = 9, channel = 9 ztcfg output

Hi, We have two of these 4 port FXO cards. However, we are having some problems with incoming/outgoing calls. The latest version of Asterisk/zaptel from CVS is being used. Voicemail, internal SIP <-> SIP calls between Pingtel xpressa hard phones work terrific, echotest is fine, and so on. The zaptel and wcfxs modules load fine, and show all 8 FXO interfaces in dmesg:

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

Here is my class class puppetconf { file { "/etc/puppet/puppetd.conf": mode => 644, owner => root, group => root, source => "puppet://puppet/cci/etc/puppet/puppetd.conf", notify => exec[puppet_restart] } file { "/etc/init.d/puppet": mode => 755, owner => root, group => root,

Hello, I'm trying to use "deliver" as a LDA for some users. I found the page http://wiki.dovecot.org/LDA where i read that i can use the ".forward" file in the user HOME directory. However, when i try, i get the following error in the maillog file : ... deliver(...): mbox: We need root IMAP folder, but can't find it or HOME environment ...deliver(...): Failed to

I apparently have a dead FXS module. Is there any kind of test I can run on it (on a live system) to determine if its good or bad? The telephone has no dialtone, gets no calls. It has been working for several months, and just quit yesterday. Thanks! Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO

hi guys, i got a TDM400P FXS card an everything is fine except for this when i do modprobe wcfxs , the linux shows 2 TigerJet Network Inc Model 300 128k. i don't know why it is showing 2 of them. or is that what it is? ERROR: Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 insane (1) 0 should be 2 Module 0: Not installed ProSLIC on module 1 insane (1) 0 cshould be

Hi, I have received a new card TDM400P revision E, from digium. When I tried to modprobe wcfxs it gave me the following errors: Freshmaker version: 63 Freshmaker passed register test ProSLIC on module 0 insane (1) 255 should be 2 Module 0: Not installed ProSLIC on module 1 insane (1) 255 should be 2 Module 1: Not installed ProSLIC on module 2 insane (1) 255 should be 2 Module 2: Not installed

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected

Hello All, I am new to Samba and having to learn it fast as I have taken over for someone who left staff. I have been asked if we can prevent users from removing directories and sub directories under a Samba share while still allowing them to read and write files to these directories. For instance we have a share defined as follows: [Baskets_Out] comment = NGP Test Baskets Out

Hello, I have few questions about Asterisk. I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago. 1.I couldn't find Asterisk version using "asterisk -V" command. How can I to find version information? 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on it. I tried Asterisk CallerID feature, but unable to get it. I tried callerid signaling V23,

I'm running Asterisk on a Gentoo box with the Zaptel 1.2.1 drivers. If I boot the machine without having the wcfxs module autoload, then install the module with modprobe, asterisk works just fine. If I boot the machine and autoload the wcfxs module, the module loads fine: > Jan 11 11:06:55 asterisk Zapata Telephony Interface Registered on major 196 > Jan 11 11:06:55 asterisk ACPI: PCI

I have a small system based on one TDM400 card with - 2 FXO modules for incoming lines - 1 FXS module for one phone The system was working fine in the past. The motherboard was exchanged and during the switch, the phones line was rewired with a mistake and a incoming phone line was connected to the FXS module, and there was ringing voltage on the module. Now, the system kinda works but the FXS

Hi all, I'm trying to install a TDM400P card, and I need some help. Please, see below... after dmesg command: [root@voip root]# dmesg via82cxxx: board #1 at 0xD800, IRQ 5 Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 3 for device 00:09.0 PCI: Sharing IRQ 3 with 00:10.1 Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1:

No matter what I do, I've tried now three different motherboards, my TDM400P keeps giving 'Freshmaker failed register test' after emitting a list of xx != 00 errors. Anyone have any clues for me? I'm wondering if I got a bad module or what. TIA -- Undocumented Features quote of the moment... "It's not the one bullet with your name on it that you have to worry about;