similar to: Call rejected by FWD: Unable to negotiate codec

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

I have looked all over the site(s) for help. But heres the problem. Im missing something. In coming works fine from FreeWorld via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net

Hello, I have 2 channels in iax.conf [iaxfwd] type=user callerid= Free World Dialup inkeys=freeworlddialup auth=rsa context=incoming qualify=yes [iaxfwd-outbound] type=peer host=iax2.fwdnet.net username=xxxxxx secret=*********** auth=md5 The problem is: When I tell FWD to call me I have this output in my asterisk consol: Executing Dial("IAX2/iaxfwd-outbound-3",

============= SJphone Log ============ Outgoing SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack --

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

Hi, I had a FWD account set up with asterisk (using SIP) and it was working fine both ways. I switched to IAX2 and now I can't get incoming calls from FWD. People who call my FWD number get a "480 - user is not online" message without any traffic reaching my box. I can call FWD numbers fine over IAX2. It seems fwd isn't trying to place the call over IAX2 because it thinks

Hello, I am trying to setup my Asterisk box to accept calls from the FWD network. I've followed all the config advice / samples I've found on the web. Making calls to devices on the FWD network from my Asterisk box works flawlessly, but whenever I try to call my Asterisk box from a FWD client I get a busy signal, and a "Call Disconnected" 486 error. What's odd is that I

I've searched WIKI and Archives but nothing. Im getting: -- Called username:password@iaxtel.com/1800somenumber@iaxtel Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call rejected by 69.73.19.178: Unable to negotiate codec -- Hungup 'IAX2[Iaxtel]/8' == No one is available to answer at this time -- Executing Hangup("SIP/104-b8eb", "")

When somebody call me on my pstn # cable connected to my fxo card it does not work when I check my computer the following error shows Connected to Asterisk CVS-v1-0-12/05/04-19:46:25 currently running on asterisk1 (pid = 2160) Verbosity is atleast 3 -- Remote UNIX connection -- Starting simple switch on 'Zap/1-1' == Starting Zap/1-1 at incoming,s,1 failed so falling

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

I'm trying to test IAX2 with FWD It registers fine but when I try to receive the call I get: chan_iax2.c:476 iax_error_output: Ignoring unknown information element 'Unknown IE' (38) of length 1 Jan 25 18:02:12 WARNING[114696]: chan_iax2.c:476 iax_error_output: Ignoring unknown information element 'Unknown IE' (39) of length 1 Jan 25 18:02:12 WARNING[114696]: chan_iax2.c:476

Guys. Im using IAX and FWD and I think everything is setup fine.. someobdy just tried calling me but my phone jus ran once and sent them straight to the voicemail.. the logs show this: -- Accepting AUTHENTICATED call from 65.39.205.121: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host prefs = (alaw|ulaw|ilbc|gsm),

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I've setup my IAX2 over FWD and it is working I can receive a test call and I can call out. Though I cannot figure out how to dial 1-800 numbers over FWD When I dial 1-800 it hangs up on me. Here is a typical session: Called xxxxx:xxxxxxx@iax2.fwdnet.net/18007425877 -- Call accepted by 65.39.205.121 (format ULAW) -- Format for call is ULAW -- Hungup

Hi, testing a new fwd account, dialling from sip4030 to my FWD number, sip4021 rings as defined in extensions conf. Why is this happening twice? -- Executing SetCallerID("SIP/4030-a7f2", ""HTCAS"") in new stack -- Executing Dial("SIP/4030-a7f2", "IAX2/617533:xxxxxx@iax2.fwdnet.net/617533|60|r") in new stack -- Called

I am having trouble with this. I can dial 1800 numbers fine as well as FWD service numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten =>

I have set up FWD via IAX service. I have tested the IAX service with 613, echo test, and 612, saytime. It all works well. However when ringing a FWD user, I got this error all the time: Connected to Asterisk CVS-v1-0-02/01/05-09:34:45 currently running on chat (pid = 8282) chat*CLI> Verbosity is at least 3 -- Executing SetCallerID("SIP/1001-a1fb", ""David

Im trying to get IAX to work between my * and FWD. I activated my iax2 account on iax.fwdnet.net and I get the output: "Registered to '65.39.205.121', who sees us as 68.14.203.254:4569" when I start asterisk. I tried used the Call Me tool on fwdnet.net but I dont get any calls even though the Call Me tool says everything looks ok. Can someone call my FWD number and just leave

> Well that didn't work....I now get this error > > > Jan 12 16:56:21 NOTICE[4989]: app_dial.c:746 dial_exec: Unable to > create > channel of type 'SIP' > == Everyone is busy/congested at this time > -- Executing VoiceMail("IAX2/iaxfwd@65.39.205.121:4569/5", "b") in > new > stackJan 12 16:56:21 WARNING[4989]: