similar to: FS- ideal starter pack. 1 X100P and 1 Grandstream Budgetone-101

Hi, I recently encountered a weired situation where my budgetone stopped working. My network is like this: Asterisk on Public IP ----------- ADSL NAT Router ----- GS01, GS02, GS03 on Internal IP We have an Asterisk server running with a public IP address, which serves as the master PBX. On a remote site, we have 3 Budgetones all having internal IP addresses assigned by the ADSL NAT router. The

I have a couple of Budgetones that I am playing with trying to get them to work with * from a remote network over the Internet (yes NAT joy!). My * server is in my DMZ and I have 5060 and my RTP range forwarded (UDP) to my public address (through a Cisco PIX). Internally, I can setup my budgetone, it registers and works great. I then have a Linksys router connected to another Internet

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

Is anyone using this combination successfully? I have a dell 500sc running rh9 and asterisk 1.0rc1. It is configured with an x100p. I have a Sipura SPA-2000, laptop with Xlite and a Grandstream Budgetone BT-101. I have signed up with Voipjet (they use iax2). I also have an FWD number via iax2. I can sucessfully call back and forth to all devices via zap, sip, and fwd. I can successfully

I know there are several folks hanging around the list that resell VoIP products, I'd be interested in getting your info off-list as I'm trying to persuade someone to get me a budgetone 101 for Christmas ;) I've checked the yahoo site, and they seem to only carry it in white.. Ideally, I'd like blue, so if you have it, please let me know. Also, I've been watching the list for

Maybe I'm loosing my mind but I've just noticed that if I put a call on speakerphone and I press speakerphone again it hangs up the call, you would expect it to take the call off speaker back on to the hand piece. I'm using V 1.0.5.22 firmware. Is there any other way to turn off speakerphone I'm missing? Cheers, Dean -------------- next part -------------- An

I bought three plus two Grandstream BudgeTone 101 phones. The shipping cost more than the phone itself from Pulver store. The first shipping had one phone defect. Nothing on the display. (Can happen!) The second shipment had one phone with a defect display, but it still worked. The second phone's handset was defect too (microphone did not work). Changing the handset from this one to the

Hi there, I'm having problems with the Grandstream Budgetone 101 on hangup - "show channels"/"show channels concise" output is still showing the call's channels as active. The problem does not exist when I use SJPhone, so I'm assuming it isn't an Asterisk configuration issue. Has anyone seen this, or better, does anyone have a fix? :) Thanks, David. --

Hi all, I'm having a really frustrating time with a bunch of BT-101 phones. They've been trouble-free and working very well for the past several months. A couple of days ago, some of the phones (but not all of them, yet) have started acting very strangely. All phones are running firmware 1.0.6.7, and are identically configured (except for the user/authenticate/password things) on both the

Hi- I'm at my wit's end trying to get a Grandstream BT-101 POS to register on my * server. Asterisk version is 1.2.1. GS Firmware is rev 1.0.6.7. Basically, I've setup the phone following the instructions at voip-info.org, and it registers for about 10 seconds, then after receiving the SIP NOTIFY from the * server, goes into "flashing display" mode, which indicates some

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

Hey Steve and everyone, I looked at the configuration, and unless I am missing something I don't think they are configured # ztcfg -vv Zaptel Configuration ====================== Channel map: 0 channels configured. In the zapata.conf file, it is the sample version, but I didn't notice anything in there that related to what you said. Or is it in a different file or location? I am

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Has anyone seen/dealt with the Grandstream BudgeTone-100 producing double dialing with asterisk? Thanks JDT Example: (password input = 101) -- Playing 'vm-password' -- Incorrect password '11001' for user '101' (context = <any>) -- Playing 'vm-incorrect' -- Playing 'vm-password' -- Incorrect password '110011' for user

I have a client using a Grandstream Budgetone 102, but he is unable to register to my Asterisk server. About every 20 seconds, I get the following messages: Aug 11 11:27:17 DEBUG[1087740720]: chan_sip.c:748 __sip_autodestruct: Auto destroying call '3b4b68ec48200ab9@192.168.xxx.xxx' Aug 11 11:27:19 NOTICE[1087740720]: chan_sip.c:7336 handle_request: Registration from

Hi everyone. I see many posts complaining about Grandstream equipment, so I thought I tell the other side of the story as well. We use Grandstream Budgetone 101 phones in our office and they work extremely well. We have no echo, no crashes, no sudden resets, they "just work". We provision them using TFTP. Our asterisk box has 2 HFCPCI ISDN BRI cards. It's running asterisk 1.2.0 on

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

I logged a bug I wanted to see if anyone else is having this problem or if it's just me. http://bugs.digium.com./bug_view_page.php?bug_id=0000486 I just downloaded the newest version from CVS(Tuesday@~7pm) and I am getting an error whenever I call the asterisk box. I cannot here any audio on the budgtone. This works fine with my pingtel phone and my sip 7960. Also if I call my Skinny 7960 it