Displaying 20 results from an estimated 10000 matches similar to: "Bad ECHO problem after upgrade to HEAD version"
2009 Sep 02
4
More Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
<span class="postbody">Greetings,<br>
I am running Asterisk 1.4.25 with Dahdi Complete
2.2.0, on a Digium TE121B PCI express card with a </span>VPMADT032<span
2004 Dec 13
2
Echo on one E1 line, but not the other
We're rolling out Cisco 7940 phones, linked to *, which is running a TE405p
EuroISDN.
We have 2 ISDN lines, one we had for testing, and one for general (40+
users) use.
During the testing phase, we had 10 phones linked to the second ISDN line,
and there were no problems with echo at all. Lucky me. However, since we
have started rolling out, we've had quite loud complaints that there is
2005 Aug 04
2
Some echo?
I have a 12 channel PRI with SNOM 190's and asterisk CVS from January.
Most calls are fine, all incoming calls are fine, but I am getting
echo on a significant number of outgoing calls.
The person on the other side hears a perfect call, but the SIPphone
side gets to hear themselves.
It happens 100% of the time to some numbers (outgoing only), and only
sporadically to others.
Has anyone
2005 Apr 22
4
TE11OP -> Mitel 200Sx??
Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows.
Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card.
All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card.
Any advice would be great.
Zaptel.conf
span=1,0,1,d4,ami
e&m=1-23
dchan=24
2015 Mar 18
2
4 Port PRI
Hi Guys
I have a 4 port PRI card that I need to setup each port in their own
group.
In chan_dahdi.conf I have the following which works for one port
How do I add the rest of the ports in their own groups so that I can have
different signaling on each?
[channels]
language=en
switchtype=euroisdn
pridialplan=unknown
resetinterval=600
echocancel=yes
echotraining=yes
2006 Jan 05
3
TE110p and pri_cpe signalling not recognized
Hi guys,
I've been installing and configuring a TE110p card. The compile and
install went very well. I'm using this on FC4 and I compile with
linux26 as well checked I on the udev configs.
zttool and ztcfg both indicate that the card is ready.
But when I try to "load chan_zap.so" then I get the following
Unable to load module chan_zap.so
Jan 5 21:43:33 ERROR[6808]:
2005 May 26
4
YET Another echo issue PRI CARD Any help accepted :-)
Good Day all,
I have a Fractional PRI connected to my Asterisk Box via a T100P
card.
When I initiate a call out to phone number 123-8888 the call
sounds great no echo what so ever.
If the person at 123-8888 hangs up and calls me right back (same
handset on both sides) same trunk line
The call always has echo on it. The Asterisk sip extension
hears them selves echoing. The remote party
2004 Apr 21
3
T100P + Zap Errors
I am having some difficulty getting a T100P card to work with my PRI.
When I attempt to make an outbound call via:
exten => 1004,1,Dial(Zap/g1/NPANXXXXXX)
I see the following on the asterisk console:
-- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack
Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type
2004 Oct 01
3
Nuvox PRI - CCITT (ITU??) vs. ANSI
All,
Having problems terminating to a Nuvox PRI, the tech at Nuvox is
saying Asterisk is transmitting in CCITT (aka ITU?) when they're
expecting (and will only accept) ANSI. The question is, is there a
simple way to change this or am I stuck with rewriting code? I googled
and checked the mailing list and found nothing, I could be barking up
the wrong tree I guess. PRI is not my forte.
2009 Feb 04
3
siemens hipath 4000
I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4
and asterisk 1.4.23 using a Te210P card.
the phone guy is saying that the lines are reporting always BUSY.
however on my end the status shows OK.
Anyone seen this? Is there something different about connecting PRI to
siemens hipath?
system.conf shows:
loadzone=us
defaultzone=us
span=1,1,6,esf,b8zs
bchan=1-5
dchan=24
2006 Jan 30
3
Set caller id on Swedish PRI (euroisdn)
Hi,
I have a problem with setting outgoing caller id to "nothing" (secret)
on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID
seems to work fine when connecting the same line to a Ericsson PBX - so
something must be wrong in my settings, but I don't know what.
I've tried:
exten => _*70X.,1,Set(CALLERID(name)="") exten =>
2006 Feb 07
3
No sound on 10% of incoming calls
Hello,
I have a problem with Asterisk, on 10% of incoming calls the IP Phone ring
but I don't hear the caller and the caller doesn't hear me (all IP Phones
have the same problem).
This problem appear also if the call is directly send to the second E1 of
the digium card who is connected to an IVR.
It does not depand on the charge of the server (I have the problem with only
one call).
2007 Apr 19
2
3rd T1 of quad card won't change signaling
Hello,
I'm trying to set the 3rd span of a new digium quad card as
a E&M T1 for Faxes to a Hylafax server. The 1st and 2nd
spans are working as PRIs. When I start asterisk, the logs
show a signaling error and chan_zap.c dies. I also get an
error that it can't read the gains but they are the
standard shown below.
2.6 kernel, Debian Stable, * 1.2 svn from feb 2007
my procedure:
make
2008 Jan 21
2
Qsig link
Hello all,
I need to conect an Asterisk with an Alcatel OmniPBX 4400 using an E1 port.
It is the first time I make this kind of connection and I do not know
exactly how to get it working.
Someone has experience with this kind of connection?
Could you paste a zapata.con and zaptel.conf files with QSIG configuration?
Any clue will be wellcomed.
Thanks
Voipcrazy
-------------- next part
2005 Sep 28
2
Sep 28 00:42:35 ERROR[5151] chan_zap.c: Unkn own signalling method 'pri_net'
Did you compile and install libpri *before* Asterisk? I had same problem
(among others) b/c I didn't install in the correct order. Try the awesome
asterisk_update.sh shell script.
Are you trying to emulate CPE or NET? Try signalling=pri_cpe
Check for whitespace behind the statement, zapata.conf seems bitchy about
whitespace.
hth
-----Original Message-----
From: Steve Totaro
2005 Aug 31
4
One way echo canceling?
Hey everybody,
I have a situation where we have 2 Asterisk (CVS as of 08/25/2005)
connected via IAX. On the corporate side, we have 1 TE110P connecting
to a Definity G3R and it's connecting to a TN464F card, giving a 23
channel connection. I have echocancel=yes, echotraining=yes and
echocancelwhenbridged=yes.
One the remote office side, they a Adit 600 channel bank for 10 outside
2005 Sep 10
1
PRI echo
Hi,
My configuration is pri----*(te405p)---iaxclient.
My * version is 1.0.7 running on tyan dual opteron
board.
I have several problems.
1) inbound echo
For outbound call(iaxclient-->pri), there is almost no
echo. But for inbound(pri-->iaxclient), I can hear
distinct echo. Can Sangoma a104 or digium te406p help
this problem?
2)Today i received te406p. I know T1/E1 jumper. But
how can i
2007 Apr 24
1
TE412P (T1/E1+DSP) digium card cause server crash
Hi all
I have a server that has two TE412P (T1/E1+DSP) cards installed. One of them
configured as an E1 PRI connected to PSTN and another one configured as a T1
E&M connected to Avaya PBX. Each card only uses two ports, so there are 2 E1
lines and 2 T1 lines connecting to this server. The purpose of this server
is as a TDM trunk gateway that gets call from E1/T1 and then forward to an
IP-PBX
2004 May 23
5
PRI problem???
I have just finished installing a new asterisk box at my work. The box is
quite hefty, dual Zeon 2.8s with SCSI drives and 2Gb of memory. I have a 4
port Digium T1 card for channel bank and PRI access.
I activated a PRI from a local CLEC (DMS-500 based, National protocol).
This PRI is on slot 2 of the card and is set as the primary timing source.
It is ESF/B8ZS.
All the software is latest
2006 Mar 07
5
MWI, SER and asterisk
I have my peers registered to SER.asterisk seems to be sending mwi for
the peers seen in the sip show peers CLI command. i have my ser server
registered with asterisk as a type=friend and all clients register to
ser.how do i get mwi to work for these clients registered to SER.
Thank you,
-AA