similar to: I need Help everyone I just bough my Xten Eyebeam

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

Hi all, I would like to connect in sip mode an Eyebeam client to a messenger via Asterisk. I want to use video. Nat is not an issue as vpn connections will be used. Is this a difficult tasks, can someone give me some pointers to get started... Have a good week-end, Francois Random Thought: --------------- Wanna buy a duck?

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same

I am trying to connect two Xten eyeBeam Video Phone No problems in voice connecting. I tryed to modify my sip.conf [general] language=it videosupport=yes ; enable Asterisk video support port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine) disallow=all allow=h263 allow=gsm allow=ulaw allow=alaw ; H.263 is our video codec ;

In an attempt to eliminate audio echo I upgraded one side of a working x-lite to x-lite connection to eyebeam. No joy, and what was worse is the audio was even worse now - just noise. Ok, I upgraded the other side to eyebeam and same thing. I'm not even using video (will enable it in sip.conf later, one change at a time). The connection looks something like: eyebeam client

Hello all, I HAD video working before I upgraded to 1.08 (latest stable with Gentoo) and now it won't work. I just see noise bars and not the video. I know the camera works as I can use it in other programs such as AIM & Yahoo. I have the following setup: sip.conf [general] videosupport = yes port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind

hi, hs anyone able to make video to work on asterisk? i tried following this: http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam i can see that eyebeam is trying to broadcast a video but the other eyebeam is not receiving it. i tested the same setup but this time using ser with rtpproxy and eyebeam video works fine. any ideas? where do you think should i start

Sorry if you see this message repeated twice. I would like to set up hard phones and softphones with the same extension so that when anybody in the company dials an extension, each user's hardphone and softphone will ring at the same time. I've tried setting this up before, but I noticed that the last sip device to register with the same extension is the only one that rings when the

-----Original Message----- From: Ferguson, Michael Sent: Tuesday, February 01, 2005 11:35 AM To: 'asterisk-users@lists.digium.com' Subject: Messaging with * and eyeBeam G'Day All, Eyebeam has gotten my interest but I do not have a "high-altitude" view of its interraction with *, therefore my questions. I called xTEN but they preferr to talk to telcos and ISP's

Hello I'm using eyeBeam, and Asterisk keeps sending my clients a second call, when they are still in one call (because eyeBeam has lots of channels). I was using X-Lite (with 3 channels) and Asterisk never sent the client a second call. How can I force Asterisk (or eyeBeam) just to send one call at each time. Is this a configuration I need to do in eyeBeam or Asterisk? Thanks Regards Joao

Lets presume that my both software are open. Xlute and Eyebeam But I want my calls from Asterisk to land only on Eyebeam and Not on xlite. How to set it ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090129/4011be6c/attachment.htm

Hi, I'm trying to find how to configure Asterisk 1.2.7.1 to allow two EyeBeam (3015c) to send Instant Messages between them... But I cannot find anything that explains how to do it! Anybody as a clue? is it possible? Now, when we try to send an Instant Message in the eyeBeam it says: "User not available". In asterisk console appears a message saying: ------ Apr 18 17:13:22

Hi all, Eyebeam has a sip-chat function and it would be nice if I would be able to use it. But the problem is that I can't really find information about it. I can just try to send a message and on the Asterisk console a message like this appears: Jun 13 10:05:25 WARNING[6512]: chan_sip.c:7281 receive_message: Received message to <sip:bla@voiphost> from "Bla

I just bough a Sipura SPA-2100 to use with Asterisk. When I use the analog handset plugged into the SPA-2100, the person on the other end can hardly hear me. I check the SPA-2100 setup and their is no mic/spk gain control. Is this a problem with the SPA-2100 or with Asterisk? Any way for asterisk to compensate for the poor audio level (if the problem is the SPA-2100)? Thanks, Mike

Hi All, So I've been exploring the use of G.722 encoded wideband audio recently. I have three different SIP devices that allow this: Eyebeam, IP650 and a Siemens S865IP. The Siemens and IP650 seems to work fine together. Calls pass between them in what the Polycom notes as "HD" mode and the audio quality is certainly very good. However, things are not so easy with Eyebeam and the

Lately I have been getting many complains that Eyebeam crashes when you dial a number that does not exist. This happens in both R2 and ISDN PRI lines. The softphone stops working and has to be restarted. The response I got from tech support was: the actual issue is that asterisk should not be sending a 503 service unavailable when a particular softphone is not online. The soft phone stops

Hi All First time poster, long time reader. I just ran into something really bizarre. I've enabled videosupport and have been testing sip calls with Xten Eyebeam software, it works (mostly) However, when I have Videosupport=yes In the [general] section of my sip.conf, broadvoice calls fail w/ "We're sorry your call cannot be completed at this time" So... I've

I am looking for a SIP Soft Video phone, which I can use with Asterisk. If you have one installed (regardless if free or purchased) please tell me which one, the settings in Asterisk and your experience with it. bye Ronald

All, I have my * box NAT'd with all ports forwarded that are SIP related (based on Wiki). I also have nat=yes, externalip=WAN address of firewall, internalip=LAN network of *. I have my Xten soft phone on a PC which is NAT'd behind firewall with ports forwarded. I have also followed instructions on Wiki for Xten. I can authenticate fine, and sip show peers shows my extension is OK,

Hello all, I was wondering if its possible to hook up eyebeam with video support to asterisk@home? Thanks Dinesh. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050913/0613e625/attachment.htm