similar to: Asterisk with Grandstream ringback

I've seen lots of stuff go around about Grandstream firmware levels (in my case specifically the BT101/102). I'm just wondering what the currently accepted 'best' firmware version is to use? After seeing stuff going around about buggy firmware I want to know what I'm getting into before upping past my current 1.0.5.11. It's relatively stable, and the last thing I want

I'm using tftp server that automatically loads on each reboot, for some reason the last 2 files fail to load each time. (and I think this has always been the case) Aborted 192.168.16.32 C:\Program Files\TFTP Desktop\1.0.5.18\cfg000b82005c24 Octet, Send 192.168.16.20 25 Jan 18:25 Error Aborted 192.168.16.32 C:\Program Files\TFTP

Hi all, Just wondering if anyone's come across this issue, and what might be a fix for it: We've got several BT-101's deployed, and upgraded to firmware v.1.0.5.16. The phone can do proper supervised transfer, but _only_ once. If the user attempts to transfer a second time, it won't work. any suggestions/hints/tips are welcome.. Flynn

Everytime that I make a call to a Budgetone 101 phone. I always see the following: -- Executing Dial("SIP/1001-bac5", "SIP/1000|20|tT") in new stack -- Called 1000 -- Got SIP response 302 "Moved Temporarily" back from 172.22.5.4 -- SIP/1000-465e is busy I can use X-Lite all the time to make a call without a problem, but any of the budgetone 101 phones

I've searched for a few days now without finding an answer. The release notes for version 1.0.5.16 of the Grandstream firmware says it supports attended transfer using replace but the docs haven't been updated so I can't work out how to enable it, or whether it should Just Work. I'm currently using the # attended transfer patch for * but would like to get back to using the

http://www.pcphoneline.com/skype "The VPT1000 is NOT a simple last generation USB phone audio device but is rather a next generation integrated gateway and USB phoneset with simultaneous dual mode Skype and SIP calling support. Skype is not forecast to have "SkypeIn" available until June 2005 but you can have the capability now via its built in SIP capabilities." Is this a

Hi I was wondering if there are any special settings that I need to be able to transfer calls. Whenever I press the 'recall' button, I just here a click, and no ring-tone to transfer. in my debug log I get this : -------------------------- Feb 24 09:09:27 DEBUG[19216]: Exception on 10, channel 1 Feb 24 09:09:27 DEBUG[19216]: Got event Pulse Start(14) on channel 1 (index 0) Feb 24

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

In that example you could make outgoing calls only correct? (since incoming likely needs port forwards) I guess the questions becomes "how often are you going to do that to justify the extra $100 or so you going to pay for a wifi sip phone?" Paul Fielding (paul.fielding@shaw.ca) wrote: > > I think some people are missing the point. You can't throw your cordless >

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

Hello. I have another issue. When I call in, everything is processed correctly, including voicemail, but I don't hear any ringing/ringback. exten => s,1,Zapateller(answer|nocallerid) exten => s,2,NoOp exten => s,3,Playback(pls-wait-connect-call) exten => s,4,Dial(${PHONE1}&${PHONE2}&${PHONE3}&${PHONE4},15,Ttm) exten => s,5,Answer exten => s,6,Wait(1) exten

My last problem was nicely solved through this mailing list so hopefully this new problem will have the same happy outcome. My situation is that I have many extensions. Here is a sample: [client-phone](!) type=friend host=dynamic secret=XXXXXXXXXX dtmfmode=auto disallow=all allow=ulaw allow=gsm allow=g723 allow=ilbc subscribemwi=no [4165555555](client-phone) secret=xxxxxxxxxxxxxxxxxxxxxxxxxx

Any ideas on why callers who call into my customer's SIP trunk are not hearing a ringback tone? I had this on one other asterisk system, and wound up needing to set progressinband=yes in the SIP trunk config. I have set this on the current system & restarted asterisk, but to no avail. I am using: AsteriskNOW distro Asterisk build is 1.6 from AsteriskNOW repository:

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

Here is the call flow: [ivr-incoming] exten => s,1,LookupCIDName exten => s,2,DigitTimeout(2) exten => s,3,ResponseTimeout(10) exten => s,4,Wait(1) exten => s,5,Background(custom/ivr-incoming) exten => 1,1,Background(pls-wait-connect-call) exten => 1,2,Dial(${RINGPHONENUMBERS},20,r) exten => 1,3,Voicemail,u${VMBOX} exten => 1,4,Hangup Running * 1.0.5. The calling party

Hello All, I saw some coverage of this in the list archive but no one seems to have posted a resolution. I am using Asterisk@Home 0.06 and when I get a call from LiveVoip over IAX I dump it into my IVR. >From there the call is routed to groups based upon input. However, there is no ringback indicated to the IAX caller. Does anyone know how to resolve this problem? Thanks, Wiley

Hello, everyone. Could anyone explain me how does ringback detection works in asterisk. Sometimes, when making a call, my asterisk box doesn't detect a ringback and I just hear silence until the other party picks up the phone. I've checked the SIP messages and they are ok (I'm getting 183 "session in progress"), so I guess I should be debugging the RTP packets. From then on