similar to: Any experience with Sangoma cards?

Is there anyone who is currently using Asterisk as a production H323 gateway? And using which combination of asterisk and H323 (chan_h323, chan_oh323?) The main issue is interoperability with other H323 parties (Cisco AS53xx, Nextone, etc). Searching the mailing list it seems that both h323 and oh323 are not so stable, is it only an impression or using h323 is really not so advisable?

Hello, I'm having problem with a wildcard TE110P. As soon as I load the module (wcte11xp for kernel 2.6.10), it spawns a yellow error with or without an E1 plugged-in. Any one managed to set it up in France? Here are my files: zaptel.conf: span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 zapata.conf: [channels] language=fr context=default switchtype=euroisdn pridialplan=unknown

People on the list tend to think you can't make many cards work on a regular desktop. If you're willing to wait a couple of week I might have an answer for you. _____ From: Robert Augustyn [mailto:augustynr@yahoo.com] Sent: Saturday, December 11, 2004 7:13 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Will Adtran TSU 600 work with *?

Hi, I am connecting to the asterisk using asterisk -r command but I never get anything on the console? How can I enable it? Robert Btw: it is version 0.4

Good day all Is there someone that's got asterisk working well with a A101/E1 card Apparently they don't have RBS support? Please advice Thanks Altus

Does anyone know if the Sangoma A101 supports DS4 and/or RBS ! Shame on me for not knowing the answer, but I don't, and I can't find any mention of it on Sangoma's website. Cory Andrews Purchasing Manager ++++++++++++++++++ VOIPSupply.com A Division of b2 Technologies 454 Sonwil Drive Buffalo, NY 14225 ++++++++++++++++++++ direct - 716.250.3402 mobile - 716.907.4054 email -

Hello, Has anyone Knowledge about softphone IAX for pocket PC totally free? Tkanks for all. -- Sandra Salmer?n Ntutumu <makevuy@ehas.org> Tlf. Analog: +34 914888405 / M?vil: 653574298 Tlf. IP desde FWD: 656212. Ext: 10 / Tel. IP desde EHAS: 010010 Fundaci?n EHAS: Enlace Hispanoamericano de Salud - www.ehas.org Telemedicina rural para zonas aisladas de pa?ses en desarrollo

We had added a lot to this release to our one button install of Asterisk. Now you can have even more features automatically installed and configured. Asterisk 1.0.7 AMP 1-10-007 Flash Operator Panel 0.20 Redesigned WebMeetme weather agi scripts Midnight Commander We have added some of our most requested features. - Web Meetme is now installed by default and the meetme2

I have an issue that hopefully you can help me solve. I've got the sangoma a101 card and installed it on freebsd but I according to the manual I should be see when running dmesg PCi0 vendor..... something that tells me sangoma it's being recognized by the system. Now this is the 2nd card I try, the first one according to support was faulty and they sent me a new one. Is it possible to be

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

Uys, Steve Underwood I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I get the far and local end unblocked but as soon as I try to make a call I get dialing and then protocol failure.. Do you guys know if there are any issues with sangoma and unicall? Anybody has an a101 card working with unicall and r2mfc? Are you out there Steve? :)

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hiya all, I have had no end of trouble trying to get my A101 E1 card working on a new asterisk installation. The sangoma tech people have ignored my emails about this. All the installation of wanpipe seems to go ok, and zaptel. it all installed compiled and does all the wanpipe hwprobe exactly as documented. Asterisk compiled ok, but when I run it give me Jun 27 11:12:18 ERROR[10528]:

Im trying to install and configure sangoma ... every thing is OK but when type the command "wanrouter start" the following error apears: wan Driver not found. Thanks for any help

We are having an occasional one w-way audio problem that occurs about every 25 - 30 calls on a system configured as follows: Asterisk 1.2.12.1 Sangoma A101 w/wanpipe beta9 Polycom 500s w 1.5.3 This happens only on inbound calls from the PRI. The external caller can hear our customer answer and say hello, however, our customer cannot here their caller. Typically, the caller calls right back

I want to buy a new server to run Asterisk and after looking at prices for the Athlon XP 3000+ it costs the same as an Athlon 64 at the same speed rating. I was wondering if Zaptel/Asterisk will compile/work on an Athlon 64? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V.

I just got a brand new A101 and am trying to install it in my test Asterisk box. The install went without a hitch. I followed the directions on the Sangoma Wiki: Wanpipe Asterisk Install http://sangoma.editme.com/wanpipe-linux-asterisk-install Wanpipe for Asterisk Configuration http://sangoma.editme.com/wanpipe-asterisk-configure It went perfect, no problems and Asterisk came up fine. I downed

Anyone using a Sangoma A102 with a Dell 750? We are looking at going this route but needed some input. I really only need a Single T1 port, but this server doesn't have a PCI-X port, which the A101 apparently requires? Thoughts, Suggestions? K

Hi, Do you need a special cable and power for that unit or you can run it of PoE Switch? Thanks. robert