similar to: IAX2 trunking, Voicepulse Connect, and Outbound Faxing

I've just made an interesting observation that I'd like to share with you all: the popular Sipura SPA-2100 just doesn't seem to be as great as I'd hoped. I've been trying to get inbound AND outbound faxing working via Asterisk and at least one of my termination services: Voicepulse or Sixtel. In general, inbound has been working flawlessly but outbound has been pretty

Until recently, I was using Broadvoice for my in/out calling thru Asterisk. I was extremely pleased to see that Broadvoice was actually passing the callerid info (number and text) that I had set up on each device in my SIP.CONF file. I had PSTN users tell me that they were actually seeing name and extension info when I called them from the Asterisk box. Last week, due to numerous user quality

I tried google and sixtel.com - couldn't find a web page for Sixtel - would some kind soul point me in the proper direction? ============================================================================ ====== Date: Mon, 13 Dec 2004 16:51:47 -0800 (PST) From: Steve Edwards <asterisk.org@sedwards.com> Subject: Re: [Asterisk-Users] IAX.cc / Sixtel? To: Asterisk Users Mailing List -

I am trying to do the following: 1. Call comes in to my * box over IAX (VP Connect DID) 2. Check to see if call should be forwarded to my cell 3. Forward the call to my cell phone and take * out of the media path. I am able to do all of the above except * is not able to natively bridge the call. I am using sixtel and for the call forward portion, but the calls don't connect before sixtel

I am using Asterisk CVS from last week and have been using Realtime SIP for a couple weeks now without any problems. Yesterday I decided to turn on Realtime IAX but I am having problems dialing to my long distance providers like Voicepulse, Sixtel or Nufone. I get the following: -- Executing Dial("SIP/2001-3761", "IAX2/password@voicepulse/19566680301") in new stack

Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. I noticed that they supposedly only allow 4 channels for free and then you have to pay $20 a month extra per channel. I'm guessing this is for inbound

Does anyone have any experience with iax.cc/sixtel? Are they a legitimate company? From their website it looks like you can get a private incoming 800 number for 30 cents/month plus 2 cents/minute. Somehow that pricing seems a little cheap for a DID number. I assume there has to be some minimum usage or something. Any info as far as actual costs and/or voice quality would be appreciated.

All, I've almost got my Asterisk PBX setup, but I've having some problems with the VoicePulse IAX trunk. On outbound calls, when dialing a PSTN number through the IAX2 trunk, music on hold (moh, using the m option in the dial command) does not work. The console states that "stop sound" on IAX2 channel. Ring works, but only without the r option. MOH works when trying to dial a

I recently switched from BroadVoice to VoicePulse Connect on my Asterisk box. Too many Meetme quality complaints (whether real or perceived). I had to make a choice to use IAX2 or SIP with VoicePulse. I first tried to go with SIP because I already had it working and all of our devices are SIP. Problem is that every time I turn my back, the Asterisk registration with the VoicePulse SIP server

Two cvs-head asterisk boxes with iax2 working fine (without register statements). When two calls are placed simultanously from system A -> B and the packets are sniffed on the wire, I see the two calls using two different udp packets. At the top of iax.conf I have trunk=yes and jitterbuffer=yes (at both ends). I was expecting to see both calls handled within a single udp packet, but

Greetings, I'd like to thank everyone that has responded to my original email. I have received information from several companies, and will be testing several of them. I also would like to update a statement from my original message to clarify it: >My strikelist: nufone, voicepulse, iax/sixtel The strikelist is just a list of carriers that didn't meet the needs a resonable

Is there anyone out there who has VoicePulse Connect working with DTMF? I've been unable to get it to work from the start, and the recent VoicePulse updates did not help. A caller to my DID's hears Asterisk, but pressing DTMF does nothing: On call setup "iax2 debug" shows: ----------------- Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

Yes, and they are aware of the problem. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jonathan Tew Sent: Monday, February 02, 2004 1:59 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] VoicePulse IAX2 lag Is anyone else noticing high lag on their voicepulse IAX2 connections? We're seeing

I don't know if this has been mentioned yet: Voicepulse is now offering wholesale pricing and IAX2 connectivity for Asterisk users. No fees, pay as you go. They also offer incoming calls for $7.99 per month. See wholesale.voicepulse.com.

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

For this week's conference, the two founders of Voicepulse, Ravi Sakaria and Ketan Patel, will be joining us. For those of you who are not aware, Voicepulse is an asterisk friendly VOIP provider that has won awards for service and innovation. We will also have Trixbox news, updates, as well as discount codes. Lastly, we are working feverishly to bring you more information regarding legal

Voicepulse has ignored four emails over the course of two weeks. Anyone have any ideas of whats wrong? - Executing Dial("IAX2/voicepulse-in-01@66.234.228.170:4569/7", "IAX2/acctname:acctpass@gwiaxt01.voicepulse.com/14109649073") in new stack -- Called acctname:acctpass@gwiaxt01.voicepulse.com/14109649073 Sep 13 22:48:25 WARNING[131080]: chan_iax2.c:5375

Need to replace our older soho fax machine with something more current. Would like to run the fax line through *, but haven't been able to make spandsp work correctly with digium TDM04b card. Our fax volume is very low (maybe a few per week), but we have multiple offices in three geographic locations and would like to be able to email the images to the correct location. For planning purposes,