I am trying to do the following:
1. Call comes in to my * box over IAX (VP Connect DID)
2. Check to see if call should be forwarded to my cell
3. Forward the call to my cell phone and take * out of the media path.
I am able to do all of the above except * is not able to natively
bridge the call. I am using sixtel and for the call forward portion,
but the calls don't connect before sixtel hangs up.
-- Attempting native bridge of
IAX2/voicepulse-in-01@66.234.228.170:4569/1 and IAX2/sixtel/3
-- Channel 'IAX2/sixtel/3' ready to transfer
-- Releasing IAX2/sixtel/3 and IAX2/voicepulse-in-01@66.234.228.170:4569/1
-- Hungup 'IAX2/sixtel/3'
Any thoughts on getting a native bridge between the two providers?
In iax.conf I DO NOT have notransfer=yes anywhere and am using ULAW
for both legs.
Brian Dingman
2005-Feb-07 11:40 UTC
[Asterisk-Users] Re: Call forwarding of IAX inbound call
Just for others edification. The problem here was that I was not performing an Answer before issuing the DIAL command to the forwarded number. Once I did that the calls natively bridged and left my system completely. On Sun, 6 Feb 2005 15:31:43 -0500, Brian Dingman <bdingman@gmail.com> wrote:> I am trying to do the following: > 1. Call comes in to my * box over IAX (VP Connect DID) > 2. Check to see if call should be forwarded to my cell > 3. Forward the call to my cell phone and take * out of the media path. > > I am able to do all of the above except * is not able to natively > bridge the call. I am using sixtel and for the call forward portion, > but the calls don't connect before sixtel hangs up. > > -- Attempting native bridge of > IAX2/voicepulse-in-01@66.234.228.170:4569/1 and IAX2/sixtel/3 > -- Channel 'IAX2/sixtel/3' ready to transfer > -- Releasing IAX2/sixtel/3 and IAX2/voicepulse-in-01@66.234.228.170:4569/1 > -- Hungup 'IAX2/sixtel/3' > > Any thoughts on getting a native bridge between the two providers? > > In iax.conf I DO NOT have notransfer=yes anywhere and am using ULAW > for both legs. >