similar to: Resellers in Europe

Got at suggestion from CarrierAccess to use the Adit 600 as an VoIP router using MGCP IP protocol, instead of controlling it through an E1. Have anyone tried this configuration? How does MGCP works? I've tried to search for it on Google, but I only find the protocol specification for it. Is Asterisk fully capable of this? I can't find any documentatin covering the use of MGCP in Asterisk.

According to CarrierAccess, the Adit 600 uses CAS for voice signalling. What is this? This should not be a problem for Asterisk? Does the Asterisk server need to reencode CAS into aLaw when going to Euro ISDN? BR Daniel Nystr?m

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

All, I'd like to buy an E100P Wildcard frm Digium, but i prefer to buy it in Europe (costs, ...). Could somebody point me to an european reseller ? Thanks in advance. -- Nicolas Cartron nc@ncartron.org

Hi I have just started playing with ROR and I think its very good. My only problem is that I am new to web development and know much abount html. I was wondering if there is any tool/plugin I could use to design rhtml pages. Regards Sandeep -- Posted via http://www.ruby-forum.com/.

Hello , I do not know anything abount Ubunto, but I found a Portable Ubunto for Windows and since so many people prefer Linux to Windows I decided to give it a try. It runs very nicely, so I tried to load R, following Instructions in CRAN I added the line deb http://probability.ca/cran/bin/linux/ubuntu hardy/ to /etc/apt/sources.list and then from a console I did sudo apt-get update sudo apt-get

Hi I would like to know if anyone has success in making 64-bit Windows Seven work with a Samba PDC without any problems? I have a Samba 3.5.6 server running on Debian Lenny. Samba works properly and is using the LDAP backend, which is integrated with Kerberos, GSSAPI, etc... Abount Windows Seven... I changed the registry as recommended Samba wiki, applied the hotfix to not give the DNS error

hi, i upgraded my testsystem running on a Dell Optiplex 780 fine for the last five years from Debian 8 to Debian 9. It also crashes on boot, after complaining abount an errer for the mcelog (-16) mounting the root partition (/dev/md0) loading parport driver (?) afterwards my monitor is out of frequency was not able to run further tests right now. best regards Thomas --------------

Hi there, I have been using samba for a while with no problems - but I just upgraded to v. 2.2.7-2. I'm using my samba server as a printserver exec. jobs into a spooling system, there is abount 250 print shares in the smb.conf file. Problem One: I'm geting a lot of IPC$ connections, is it possible to get rid of them ?? Problem Two - and more Important : Some of my users are getting a

Hi Guys, Thi sis my first post, sorry for my english, I''m Italian. I desperate try configure home server/router connected over ADSL with dynamic IP. I''ve registered to no-ip and in order to connect externaly to my home server. My system is gentoo based. I''ve just installed different pubblic servers with static IP and shorewall and had no problems, but my own home

Hi everyone! I'm using Ubuntu Dapper and today i build an individual kernel based on the vanilla sources for 2.6.16 with the CK Patchset. Everything works fine, except wine. Everytime i start an application with wine or just winecfg it needs a long time to come up. Winecfg e.g. needs about 2 minutes (with the default Ubuntu kernel abount 10s). During that wait time i can hear some

Are there much performance differences when using XEON or not? In my case, I will go with muLaw both in and out of Asterisk. Are there really any processing at all if it's using same codec all the way?

Hi, I've purchased two x100p clones, and when I try accessing a line from asterisk with something like this: exten => _1NXXNXXXXXX,1,Dial(Zap/2/{$EXTEN}) (is that only supposed to put you on channel 2 or actually dial the # for you?) but I first hear noise, then a dial tone, but as soon as I start dialing numbers I get feedback and noise, and the call doesn't go through. Any

Hi again folks! ;) As before, I will transform one E1 30 Channel PRI into 30 FXS channels using Adit 600. Now I'm into choosing server platform. And the two opponents are: * Dell PowerEdge 750 w/ SCSI RAID (or even SATA RAID1) * FujistuSiemens PRIMERGY RX100 S2 (SATA RAID1) As I've seen people having problem with HP server, I havn't looked at it at all. What experience do you

Hi, I've a strange issue with the performance of file transfers between a Samba server and a Vista client. My configuration looks like this: fileserver: Samba 3.3 on FreeBSD 6.2 ----- gbit switch ----- workstation: Vista x64 When transfering files between the two PCs, I get abount 6.5 to 7 MB / sec. On my last Vista installation I got about 40 MB / sec. I've tried the following: -

Hello Folks, I'm trying to decide here between a few cards for connecting an Asterisk box to a single E1 channel (either PRI or R2 signaling): - Digium E100P: has been replaced by the TE110P below, but can still be had at places like digitnetworks.com for $475, and I guess there's always a place for good-olde-obsolete cards in the world as long as they work :-) - Digium TE110P:

Has anyone had any success using the Adit 600 with the CMG card talking MGCP to asterisk? I want to have a central asterisk server with 10 Adit 600's at various locations providing 24 FXS ports.... Thanks, Isaac

I've just installed a Digitnetworks X100P clone in my * server and run the install script for the voicepet-single-x100p tarball. The install appeared to run OK with modprobe wcfxo successful and the ztcfg reporting "Channel 01: FXS Kewlstart (Default) (Slaves: 01)". When I try to start * though I get a segmentation fault after loading res_features.so. I discovered that the

Hello, everyone! I would like to solve the following problem. Btw, I''m terribly sorry about the pseudo-asciiart, but that''s all I can paint as a tropology. I''m hoping it''ll be enough. ----Internet---- | | | eth0 machine A routing+ipchains eth1 | ------------------ machine B So, given I''m running kernel 2.4.19 and using ipchains

Hi: I had an fxo card from Digitnetworks and it was working fine on my Asterisk box. I then replaced it with TDM04B. I changed the zaptel and zapata to include the four channels. When I run ztcfg, I get configuration errors: Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: