similar to: Problem patching asterisk CVS with SpanDSP

Hello: I have successfully install spandsp and patch asterisk with it. But when I received a Fax is garble or shrink. Does any one know why???... Am using a PRI T100P card to receive the fax and save it to a tiff file... Any help will be greatly appreciated. Here are the versions. Latest csv from asterisk, spandsp-0.0.1k.tar.gz redhat 7.3 T100P has its own IRQ. Any help will be greatly

Hello All ~ Having problems sending and receiving faxes with SpanDSP. I am testing on a simple 2 analog POTS to 2x X100p set up, connecting one line to a Konica 720 fax machine to test, or with other remote fax machines. Voice calls are working pretty well now. Platform is P3/800MHz/256MB/FC1. * recognizes faxes, and passes calls to RxFax and TxFax OK, but 99.9% of the time no fax content is sent

OK...I pulled down spandsp 0.0.1k today and followed the instructions. However, I'm not seeing a Makefile.patch anywhere. I've looked through the last few months of messages and haven't found any reference to it missing for anyone else either...so...what am I messing up here? Thanks. Mark -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Several people have reported problems sending faxes from spandsp-0.0.1k to Canon FAX machines. A spandsp user had the same problem with another make of FAX machine, and traced the problem to a bug in the file t30.c of spandsp. Line 542 says s->t4.rx_file[0] where it should say s->t4.tx_file[0]. This fixes his problem, and I suspect it will also fix the Canon fax machine problem.

I have to build my own rpms for the HIPL project. I update my copy of the code and make rpm. Thing is the rpm name never changes from patch to patch. Is there a way to have yum apply the new code as an update and not have to erase then install?

Hi, I would like to calculate the RELATIVE euclidean distance. Is there a function in R which does it ? (I calculated the abundance of 94 chemical compounds in secretion of several individuals, and I would like to have the chemical distance between 2 individuals as expressed by the relative euclidean distance. Some compounds are in very low abundance whereas others are in high abundance,

Hi, After a hiatus of several months, I decided to try spandsp again because it is such an excellent addition to asterisk. Using 1.0.3 and spandsp 0.0.1k. When I send a fax from a laptop software fax that works with every machine I've ever had to fax to, I get something like this as staus return from the fax sending software: - Getting Local ID - Getting Parameters and it loops like this

Dear All, I'm having problem with spandsp/txfax, I'm not able to send a multi paged tiff file, the fax machine receives the first page of the document and complains about communication problem. The file what I'm trying to send has 2 pages and is received & generated by spandsp/rxfax. Searched in the archives, but found no solution. I'm using: Dell Optiplex PC Inoteska Quad

I've seen people mention that they have fax reception working with Asterisk, spandsp, and app_rxfax. I'm using the latest Asterisk from CVS, SpanDSP 0.0.1k, and the latest app_rxfax.c (as mirrored by friendly list members recently), and libtiff 3.5.7. Asterisk is detecting the fax signal properly, and executing the fax extension in the dialplan. The fax part of the dialplan is pretty

I've recently started playing with the RxFax application on my Asterisk box. I've had success, mostly, but I've had some failures, too... The most recent failure is specific to receiving from a particular fax machine -- a "Canon Laser Class 9000S". The TIF images received are readable, but the aspect ratio is stretched horizonatlly (or squished vertically). Is this a

Hi to everybody, I have the problem that nearly no information are displayed on the Asterisk CLI (asterisk -r). In former times (before patching Asterisk 1.0.2 with ast_data 1.0.2) it looks e.g. like this: --- snip --- -- Registered '96' (AUTHENTICATED) at 212.202.169.118:4569 -- Accepting AUTHENTICATED call from 212.202.169.118, requested format = 1024, actual format = 1024

Hi, I just sent this to Steve Underwood, but then found a bunch of posts on the mailing list about similar issues.. does anyone have the fix? I'm running asterisk CVS-HEAD-06/28/04-18:13:13, spandsp 0.0.1k, libtif 3.5.7 one thing i just noticed is that calls come in with format '72' which is G711A-law or LinearPCM.. it uses PCM for the call, i assume this is ok the results of RxFAX

Anyone knows where can I find spandsp? Official site seems permanently down... TIA, Simone.

Hi Steve, You are a legend !!! It is properly disconnecting now. Although I am having problem with the fax detection. Somehow fax will only be detected if NO CLI was sent from the PSTN line but if the line received the CLI, fax tone is ignored. Does anyone had the same experience? Is there any workaround or fixed for it? Rey > Message: 11 > From: Derek

Hello, group: I install spandsp and the respective applications in my asterisk box running Redhat 7.3. Rxfax received the fax but when I display on my application the only thing I get is a long Black line in the midle of the page like the fax is being shrink to one Black line. Has any one experience the same problem, and what should I do to fix it???.. Am using

Good evening all, to complete test that I made in august (and which where discussed here) about garbage when receiving fax, I went more down in my tests. At first, my setup is an * CVS-HEAD-09/08/04, spandsp-0.0.1k, X100P (Tiger Jet Network Model 300 128k), kernel 2.4.26 on an SMP SoftRaid machine (2x400Celeron 400) and 448 MB RAM. I tried the same kernel without SMP. I tested with a HP

I am trying to use spandsp 0.0.1k-whole. I have 2 X100P working well for inbound/outbound calls. I have tried libtiff 3.6.1 and 3.5.7 With 3.6.1 I get only faxes all black, and 3.5.7, I get blank vertical lines and the rest all black also. During the transmittion, apparently there is nothing that can indicate any error except some "Training errors". The sender fax thinks that the fax

I've installed spandsp-0.0.1k on a RHv9 box with CVS-HEAD-09/19/04 and compiled the libraries just fine. Having a problem with patching the asterisk/apps Makefile however. The patch attempt results in: [root@phoenix apps]# patch <Makefile.patch patching file Makefile Hunk #1 FAILED at 35. Hunk #2 FAILED at 68. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej [root@phoenix

Hi all, i'm looking for docs about a stable configuration of spandsp that works whit *. I use asterisk CVS-v1-0-11/19/04-19:26:32, libtiff-3.5.7-11, libtiff-devel-3.5.7-11, spandsp 0.0.1k, audiofile-0.2.3-6 and audiofile-devel-0.2.3-6, but every time i use rxfax asterisk hungs and an 8 k fax file is written Thanks in advance. -------------- next part -------------- An HTML attachment was

Is there any stable version of spandsp that works on a 64 bit Linux on an AMD64 machine. When compiling version 0.0.1k I get the following error: gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -c testcpuid.c -MT testcpuid.lo -MD -MP -MF .deps/testcpuid.TPlo -fPIC -DPIC -o .libs/testcpuid.lo /tmp/ccXxGHg6.s: Assembler messages: /tmp/ccXxGHg6.s:8: Error: suffix or operands invalid for `pushf'