similar to: How to present a dialtone to a dial-in user?

Hi all, I'm setting up an IVR using Asterisk. Is there a way to have two streams played to the caller at the same time: for instance, one constant flow of background music, and the IVR contents at the same time? I've looked for solutions using (E)AGI and other things but nothing seems to work. Googling around and reading the list has not been helpful either... Thanks for your help,

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Hi all, I have thoroughly read the available documentation and I can't seem to find a workaround for my setup... I'm trying to create a phone conference line that users would call using a unique phone number (no matter if they are moderators or just plain users). I use Asterisk 1.2.6 The available conferences are defined as follows: conf => 1000,user pin1, moderator pin1 conf =>

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I

Hi, i have been using asterisk CVS 19/07/2005 and asterisk-oh323-0.7.2. I now want to use oh323 with Asterisk 1.2.4+. Can anyone tell me what versions of oh323(and pwlib and oh323) they got to work with Asterisk 1.2.4+. -- thanks, yusuf

Hello all. I have installed and functioning asterisk-1.2.9.1 where I effected one upgrade in asterisk-1.0.9, is interconnected with a PABX Siemens HiPath 4000 in ISDN PRI with protocol QSIG, the one that is happening he is that the calls originated for PABX Siemens and destined to SIP phones asterisk are being without audio, nor Ring, is dumb. They could help in this case me? Best Regards Josu?

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hello, I created a new application for myself called Dialtone() by modifing res/res_indications.c file. It can be used as such: exten => s,4,Dialtone(30|${CALLERIDNUM}) exten => s,5,Playback(time-exceeded) exten => s,6,Goto(s|1) It will stutter if you have new voicemail and you have passed the mailbox number as I did above. It will stop dialtone the moment you press a key

Hi List, I cant seem to find the setting that changes this! You put a person on hold, they are on hold like normal, but after a few seconds the phone will then start having dialtone coming from the speakerphone, really weird!! Anyone know how to fix this? I see where it could be nice, but in this case, we just want them on hold is all, no dialtone! Any help would be great! Thanks! Ron

I'd like to write a snippet of dialtone that plays dialtone and collects a specific number of digits into a variable. Sort of like READ but with a generated dialtone. Naturally, I want the dialtone to stop playing after the first digit. I can't find this anywhere. Only thing I can think of is a no-password DISA. Is this the correct method? Is there a better one? </edg>

Hi, I see applications for signalling busy, congested, ringing, progress etc, which I understand can be provided either in or out of band. But all I want to do is generate a dialtone. This obviously can only be done in band. There is code for generating the tones when you have a physical line, like the alsa channel, or a zap channel. But I'm just thinking of if they've selected an option

Hi, I'm having a little problem when trying to make a call from asterisk. I connect a SIP phone to asterisk, and in the asterisk box I have a TE110P card connected to a E1. When a SIP client makes a call through the E1, I received no dialtone in the SIP client. In the same manner, when somebody from the POTS network makes a call to a SIP client (through * and the E1) he doesn't receive the

Is there a way to generate an old-fashioned dial tone with Asterisk? I'm thinking of one that sounds like: http://www.seg.co.uk/telecomm/dialtone.wav -- Phil Reynolds o ____ mail: phil at tinsleyviaduct.com |L_ \ / Web: http://www.tinsleyviaduct.com/phil/ (_)- \/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.

i need to know something in the zaptel configuration as it seems i can configure detecting the busy tone and hangup after number of busy tone counts, that was great but the problem is sometimes the pstn line has no dialtone and when i try to make call it continue dialing while not having a dialtone! while it should say "all lines are busy/congested" how can i configure that?? i already

So I have an X100P, and a TDM10B both working (at least I think they are). The drivers have been loaded and ztcfg -vv shows no errors in the configuration of two channels. When I run asterisk -vvvc and pick up my phone (plugged into TDM10B), I don't gear a dialtone. in phone.conf, I have [interfaces] mode=dialtone format=slinear ... Shouldn't that produce a dialtone when I pick up the

Hi, Is it possible with asterisk to deliver a dialtone to a software phone, such as kphone? I'm able to dial, but the silence seems to confuse my users :) thanks, lane

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Guys.. Im new to asterisk but is it possible to simulate a dialtone for example, in other PBX when you pick up the phone you can hear a certain dialup, which is the PBX dialtone, and when you hit 9, you can hear the PSTN dialtone, is this possible? __________________________________________________________________ Anton Krall