similar to: Digium T100P T1 Card

Hi, I have scanned through the archives of this list and found a number of question about hardware, but I just can not find the answer to my question. I am new to phone systems, I got "drafted" to come up with a new phone system for our company (I guess they figure since I know computers I know phone systems as well :O). We have 5 analog (I guess they are called PSTN lines) lines coming

Hi I am setting up a phone system for a small office. The office will have 5-8 phones and a fax line. There are 4 hunt lines coming into the office. We have made no hardware purchase yet. Being an asterisk newbie, before I suscribed to this list I just assumed that I would buy voip phones and connect all the phones to a private ethernet network. However, I see many people inquiring about FXS

Can I have a TDM400 and a T100P in the same machine? I am using AAH and trying to combine two boxes. If so, can anyone tell me the proper config for zaptel.conf and zapata.conf? Thanks! Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051006/061d9d84/attachment.htm

I need a good reliable source for channel banks. Ebay is nice but too many variations of quality. I need one that can do 8 FXO and 16 FxS does anyone have a particular model, other than adtran that they can recommend??? And if possible include a source to buy from... Thanks in advance, Alex -------------- next part -------------- An HTML attachment was scrubbed... URL:

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

I'm going to install asterisk with four digium cards. Can anyone mention a brand that carries boards with 4 compatible pci slots? Thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Hello All, The problem I'm facing is the following: two machines that require analog signal. However, connection to the world is setup as follow: T1 connection to Asterisk server Any suggestions on how to convert digital signal to analog? Type of card on my Asterisk server is wct4xxp Thanks for your support! Motty -------------- next part -------------- An HTML attachment was

Hi, Have posted to this list a couple of times and have always received great responses and help. I have a basic * system setup Using 3 X100P cards with 6 Snom200 IP phones. It was a bit of a struggle getting everything up and running but have been pretty happy with the flexibility and ease of *. My major problem is one that has been discussed on this list many times before. The echo

As a follow-up to my previous post where I stated the IAD would be a Vina model, after some more prodding to XO, they have told me it will either be an Adtran TA-600 or a CAC Adit 600. These products are covered pretty well on the web and I have manuals on both. So, if those knowledgeable folks had to use one of these to attach to an Asterisk box, what interface would be best or at least

Hello, I don't have any experience with channel banks and would appreciate any feedback on my theory outlined below: We have a single T1 entering the building with channels 1-12 being voice lines and 13-24 being a 768k internet connection. This T1 terminates to an Adit 600 (T1-1). Here's what I know. Channels 11-12 go out the Adit 600's 25-pair connector to a wiring block (and

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

Hello, I am connecting Asterisk to an Adit 600 via a T100P. Unfortunately I am not able to get any lights on the T100P and the Adit 600 only shows red. I have already modprobed the t100p. Has anyone successfully connected these before? I've tried both a cross-over cable and a standard cat 5 cable, but I can't seem to get them to work. Any suggestions? Thanks! Craig

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 8351 bytes Desc: image001.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050601/65fd0455/attachment.gif

Hello All, Anyone out there using ISDN PRI from either MCI or XO/Allegiance? Gotta make the choice today and the difference per month is only about $25 in favor of MCI. Billing is pretty much the same between the two so I have pretty much no point of reference on which to choose. Any thoughts from anyone experienced with these two compnies would be greatly appreciated! Thanks, Wiley

I'm looking to expand my bandwidth for my Asterisk PBX. Why should I choose a T1 over DSL for my asterisk server? I found someone offering T1's for $290 a month + Loops or 3 Meg for $561 a month + Loops. Is this a good deal? Thanks Bart -------------- next part -------------- An HTML attachment was scrubbed... URL:

Just starting my search for a SIP/MGCP/H323 channel bank. I need analog ports in a building that only have network connections back to my * server. I could install another * server and use a normal CB with a PRI but I would like to investigate any good CB's with network trunk abilities Thanks Dave Packham

Below you will find, what I believe to be a typical setup with a T100P card. My question is - 1. Is this correct? 2. What kind of phones would be needed here... (Would you have to use Digital phones) And if so what would you recommend. PRI/T1----- | | | ---------------- | | | Channel Bank | | |

First of all - Many, many thanks to Mark for his troubleshooting and fix of bug 1320 (FXO_KS signalled Zap Channels on Adtran 750 Channel Bank Stuck in Rsrvd State). I have heard complaints that once every couple weeks, when a user picks up their analog phone (t1 span off of a TE410P into an Adtran 750 with 6 FXS cards), they don't get dialtone, but instead, hear another conversation.

Hello, Did anybody successfully tried upgrade Adtran TSU 600 to firmware which is working properly with T100P and asterisk ? B.